Frederic Meeuwissen
dd3e447366
[CURA-11966] Rename wall_overhang_speed_factor
...
Missed a couple of files with the other commit.
See 2db4d16a80bb0b449871399b8d236205e58c09b9
2025-02-11 15:53:22 +01:00
Alan Bjorklund
91ac6a5207
Add Replicator+ to product_to_id.json
...
PP-538
2025-02-11 09:40:10 -05:00
Erwan MATHIEU
74f7f43754
Merge branch 'main' into PP-550-PCABS
2025-02-11 14:05:21 +01:00
Erwan MATHIEU
01fd82e8e5
Merge branch 'main' into fix_qml_py_re
2025-02-11 13:19:50 +01:00
HellAholic
d5649ace05
Merge pull request #20201 from Ultimaker/Kedge-Draft-PP-561
...
PP-561 0.27 layer height options for Sprint
2025-02-10 11:45:13 +01:00
Alan Bjorklund
c0a734a1ac
Corrected Rep+ zero speed values
...
Some speed values were set to zero accientally,
these updates ensure that all speed params have
non zero values.
Also, I noticed some temperatures were not correct.
I added a few changes to correct layer_0, initial,
and final print temperature values.
The default print temp is still not correct, I will
submit another commit for this.
PP-538
2025-02-07 17:35:05 -05:00
HellAholic
cc7eb2c218
Merge branch 'main' into PP-550-PCABS
2025-02-07 16:45:06 +01:00
HellAholic
680f953524
Merge pull request #20051 from Ultimaker/PP-547-Set-Breakaway-BVT-to-max-40C-for-Factor
...
PP-547 Set Breakaway BVT to max 40C for Factor 4
2025-02-07 16:03:21 +01:00
Erwan MATHIEU
686b404a95
Set support page to be opened on core incompatibility
...
CURA-12393
2025-02-07 15:56:30 +01:00
HellAholic
53f4046a51
Merge pull request #20129 from Ultimaker/PP-544-HS-Method
...
Add intent profiles for Method High Speed
2025-02-07 13:24:32 +01:00
Erwan MATHIEU
49be241169
Merge branch 'main' into zyyx_bugfix
2025-02-07 07:57:55 +01:00
THeijmans
3e250553a4
PP-569 set top surface flow to material flow to reduce gaps in top surface. Overextrusion is preferred.
2025-02-06 16:41:03 +01:00
Erwan MATHIEU
8a77993d0b
Merge branch 'main' into Kedge-Draft-PP-561
2025-02-06 16:18:42 +01:00
Erwan MATHIEU
4c6acca3f8
Merge branch 'main' into PP-538_Replicator-plus
2025-02-06 16:14:45 +01:00
Erwan MATHIEU
235114ba53
Merge remote-tracking branch 'origin/main' into PP-550-PCABS
2025-02-06 16:10:04 +01:00
Erwan MATHIEU
e2f08eebb3
Merge branch 'main' into PP-547-Set-Breakaway-BVT-to-max-40C-for-Factor
2025-02-06 15:59:22 +01:00
Erwan MATHIEU
eb5c5a1ad9
Merge remote-tracking branch 'origin/main' into CURA-12261-3dconnectionmouse
2025-02-06 12:57:24 +01:00
HellAholic
4be40f770c
Merge branch 'main' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-02-03 10:05:10 +01:00
HellAholic
a695a27408
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-02-03 09:54:36 +01:00
Alan Bjorklund
f039e90132
Moved 0.27 profiles into "imperial" quality
...
This commit corrects the filenames in the previous
commit. Profiles with 0.27 layer height had "0.3"
in the filename. Now they are correctly named as
0.27.
PP-561
2025-01-30 14:28:09 -05:00
HellAholic
cd6827cbaf
Merge pull request #20208 from Ultimaker/PP-535_add_pa_setting
...
[CURA-12389][PP-535] Add pressure advance setting
2025-01-30 09:26:35 +01:00
HellAholic
a62ed73abe
Merge pull request #20194 from Ultimaker/CURA-12224_handle-LOOOONG-setting-names
...
CURA-12224 handle loooong setting names
2025-01-30 09:13:24 +01:00
HellAholic
1b485824cf
Merge branch 'main' into PP-535_add_pa_setting
2025-01-30 08:48:41 +01:00
HellAholic
654150526e
Merge branch 'main' into CURA-12335_expose-bottom-skin-settings
2025-01-29 15:50:00 +01:00
HellAholic
49cc44b4ec
Merge pull request #19983 from Ultimaker/fix_crash_on_material_management_sovol_sv01
...
"Sovol Base Bowden Printer" update to add resolveOrValue to retraction_speed override
2025-01-29 14:02:51 +01:00
HellAholic
628c852054
Merge pull request #20169 from Ultimaker/CURA-12368_mismatched_core_warning
...
[CURA-12368] Warn for mismatched cores on multi-config printers.
2025-01-29 13:54:47 +01:00
HellAholic
40f738f15f
Applied printer-linter format
2025-01-29 12:49:58 +00:00
HellAholic
0680a21670
apply review comment
2025-01-29 13:48:59 +01:00
HellAholic
72e38534e6
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-01-29 10:47:22 +01:00
Frederic Meeuwissen
eec90b5bdc
[PP-535] Add pressure advance setting
2025-01-29 09:35:28 +01:00
Alan Bjorklund
859327b3ba
Sketch infill line width update
...
Add logic that sets the infill width to 0.4
when the layer height is not equal to 0.2.
The infill width at 0.45mm was causing the
flow rate to be > 30 mm^3/s for 0.27 Balanced
prints. This update corrects the flow rate issue.
PP-561
2025-01-28 17:42:57 -05:00
HellAholic
ebedb66ae1
Merge branch 'main' into CURA-12224_handle-LOOOONG-setting-names
2025-01-28 11:29:24 +01:00
Erwan MATHIEU
c369a405b3
Set dynamic items size
...
CURA-12368
2025-01-28 10:34:58 +01:00
Remco Burema
669c28e618
Try to make unavailable configuration warnings less confusing.
...
part of CURA-12368
2025-01-28 09:20:47 +01:00
Alan Bjorklund
a7c234862a
Add 0.27 layer height options for Sprint
...
Enable PLA and TPLA at 0.27 layer height via
Balanced & Draft mode options.
Draft mode has higher acceleration values, and
adjusted overhang settings. Also additional minor
settings changes such as first layer height, and
initial cooling fan.
PP-561
2025-01-27 18:02:54 -05:00
Alan Bjorklund
8db6c820aa
Initial Profiles for Replicator+
...
Add definition for Replicator+, along
with three extruders: SE+, SE+ Tough,
and SE+ Experimental.
Add Replicator+ settings for PLA & TPLA.
These are similar to Method settings,
with some first layer adjustments.
PP-538
2025-01-27 17:03:00 -05:00
Alan Bjorklund
9830cb5804
Improvements to PC-ABS 175 self support
...
PC-ABS & PC-ABS-FR 175 profile adjustments
for self support to prevent under-extrusion
while still printing a delicate support
structure that is easy to remove.
These changes include fan speeds, line
widths, material flow settings, and print speeds.
PP-550
2025-01-27 16:24:31 -05:00
Erwan MATHIEU
2e59a0a009
Give more space to text when required
...
CURA-12224
This way, multi-lines setting names can be properly displayed
2025-01-27 15:24:42 +01:00
Erwan MATHIEU
3b2d0fd8af
Slightly reduce the width of setting fields
...
CURA-12224
This gives more space for the text, which can sometimes be very long
2025-01-27 15:23:55 +01:00
Erwan MATHIEU
caa944e226
Merge branch 'main' into PP-552-Metallic-PLA
2025-01-27 13:53:42 +01:00
Erwan MATHIEU
51a7cb1f90
Add extra settings for flooring on the basis of roofing
...
CURA-12335
2025-01-27 10:05:52 +01:00
casperlamboo
c63c697714
Apply printer-linter format
2025-01-24 12:23:55 +00:00
c.lamboo
7a962216fb
Merging CURA-7435_3DConnexionII
2025-01-24 13:20:41 +01:00
Erwan MATHIEU
8fca5d9c69
Merge branch 'main' into PP-544-HS-Method
2025-01-24 10:32:58 +01:00
HellAholic
f86f5d50dd
Merge branch 'main' into PP-554-Kedge-Roof
2025-01-24 09:29:56 +01:00
HellAholic
bbf7b4dde0
Merge branch 'main' into CURA-12362_Cheetah_flavor
2025-01-23 10:41:38 +01:00
HellAholic
e8b2abad1e
Merge branch 'main' into flip_toolhandle_y_description
2025-01-23 09:58:27 +01:00
Remco Burema
038e8b7722
Warn for mismatched cores on multi-config printers.
...
Similar to the warning we already had for missing materials.
CURA-12368
2025-01-22 21:16:56 +01:00
HellAholic
0f0af30761
Merge branch 'main' into CURA-12362_Cheetah_flavor
2025-01-22 13:38:45 +01:00
Erwan MATHIEU
a13726bba1
Move interlocking settings out of experimental
...
CURA-12247
Also set interlocking_enable to basic settings because it is quite important and just enabling it doesn't require advanced knowledge/skills.
2025-01-22 09:54:20 +01:00
