Erwan MATHIEU
5ef569d8ce
Set only UM variants name as being translated
...
CURA-12255
Also applied some consistency between labels, so that they are more consistent and more printers get their variants name translated.
2024-11-06 10:55:43 +01:00
Erwan MATHIEU
d7dbd13034
Finalized changing brim_outside_only to briml_location
...
CURA-9838
2024-02-29 12:00:28 +01:00
Remco Burema
cf922295db
Try before the beta. After it's too late.
...
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
2023-02-21 15:43:12 +01:00
jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Jaime van Kessel
2c331604e8
Clean up a lot of duplicate settings from machine profiles
...
These were errors that were copy pasted from other definitions. So leaving them as is would
continue to decrease the quality of third party profiles.
2022-09-06 11:39:08 +02:00
Konstantinos Karmas
61d18f22b2
Fix combing value not being recognized
...
The value of an enum needs to be in single quotes when it is in the "value" field or else it won't be recognized.
CURA-7976
2021-09-29 13:35:21 +02:00
Ghostkeeper
dc09465afe
Standardise capitalisation of printer names
...
Some contributors seem to have a shift key stuck here or there. Many 'stylised' capitalisations weren't reflected even on the manufacturer's websites, or were also stylising words like 'pro' and 'dual' or even actual chemical names like 'nylon'. Normalising the caps makes it more fair for everyone, since all of these are written in the same font.
As discussed with the Cura team.
2021-06-11 13:49:35 +02:00
MarkMan0
ee50ad21cd
Probe calibration on the side of the buildplate
2021-04-08 13:27:05 +02:00
MarkMan0
d7c8d05be9
Change machine_start_gcode
2021-03-26 14:58:26 +01:00
MarkMan0
cc76002c03
disable infill_before_walls
2021-03-26 11:49:47 +01:00
MarkMan0
5872065dc8
fix temperatures
2021-03-26 11:49:35 +01:00
MarkMan0
145311d615
Minor changes to start/end gcode
2021-02-24 19:06:46 +01:00
MarkMan0
2e798c6edf
Update start gcode in base
...
Increase probe temperature
2021-02-22 11:40:31 +01:00
MarkMan0
f2770c3bcc
Add minimal wall_thickness for small nozzles
2021-02-22 11:19:09 +01:00
MarkMan0
5c66c018a7
Adjsut start/end gcode
2021-02-17 14:34:29 +01:00
MarkMan0
27af35591a
fix gantry_height
2021-02-16 11:17:21 +01:00
MarkMan0
d925c28eb8
Fix value/default_value errors
2021-02-15 17:27:40 +01:00
MarkMan0
acf79aa31d
Definitions for INAT Proton X printers
2021-02-11 18:05:42 +01:00
