Was used for run-time efficiency, but it wasn't really ever set beyond one layer-height, which made it rather useless.
frontend part of CURA-11157 -- needed version upgrader as well, since it's the first alteration
A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
* Added prelim support for the BX
* Revert "Added prelim support for the BX"
This reverts commit 923fbdbbb617d000663f04d08d468ed0c560517c.
* Added prelim support for the BX
* Revert "Added prelim support for the BX"
This reverts commit 923fbdbbb617d000663f04d08d468ed0c560517c.
* Added BIQU BX printer def
* Updated the platform name.
* Minor update to the start code. Ready for merge.
Conflicts:
cura/CuraApplication.py: Setting version
fdmprinter and fdmextruder: Setting version
intents, qualities and variants: Setting version
Changelog: 4.9.1 was added, should be below Arachne changes
Some contributors seem to have a shift key stuck here or there. Many 'stylised' capitalisations weren't reflected even on the manufacturer's websites, or were also stylising words like 'pro' and 'dual' or even actual chemical names like 'nylon'. Normalising the caps makes it more fair for everyone, since all of these are written in the same font.
As discussed with the Cura team.
Context: Print Thin Walls and Fill Perimeter Gaps are old settings that aren't needed any more since we switched to libArachne (Varianble Line Widths).
CURA-7148
This was found to be better in https://github.com/Ultimaker/Cura/issues/8321 due to changes to the simplification function.
Other printers are assumed to have a similar effect, or have their original value copied from Creality printers.
There were a number of problems with it:
* There were duplicate JSON keys. One of the duplicates gets ignored then according to the JSON implementation in Python.
* There were some 'value' properties that contained undefined variables since the setting type was a string and the value is a string containing a Python expression that should result in a string, not a plain string.
* There was one instance in which a 'default_value' property contained a formula.
Contributes to issue CURA-7752.
* Added BIQU machine base files as well as BIQU B1 machine files.
* Fixed a variants settings version error.
* Updated base def by removing excluded materials and changing the pref to pla175
* Fixed the machine name value which should only take a default value and not also a value.
* Increased the max extruder feedrate to allow the default retraction speed.
* Removed comments from the quality profiles. Removed author from variants. Adjusted materials in quality profiles to refer to the 175 profiles directly.
* Enabled coasting by default in the B1 profile and increased the width of infill for the base profile.
* Updated all quality and variants configs to use settings version 16 in anticipation of release 4.8
* Final tweaks to B1 start gcode
* Added an ABL version of the B1 with tweaked start codes.
