Lipu Fei
12e794fe50
Remove has_machine_materials and has_variant_materials
...
They are not used.
2019-08-07 10:44:02 +02:00
Jaime van Kessel
0bf683d7b9
Set maximum value of the build_volume_temperature of the s5 to 50
...
CURA-6680
2019-07-23 17:48:43 +02:00
Ghostkeeper
60060db0d5
Reduce weight of S5 definition
...
It's now the 2nd year after the introduction of the S5 so we have to reduce this weight by one.
Contributes to issue CURA-6500.
2019-05-13 15:47:47 +02:00
Ghostkeeper
e26e825d83
Overwrite gantry height value instead of default_value
...
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
2019-05-13 09:30:32 +02:00
Jaime van Kessel
e363f1af94
Remove hardcoded references to Ultimaker machines in QML
...
We shouldn't hardocode machines in QML in any case. It also created issues
for other monitor / connection flows.
2019-05-03 14:10:21 +02:00
Diego Prado Gesto
a713cdc6bd
Add new values for the resolution and deviation settings
...
According to the experts
2019-04-18 17:26:01 +02:00
Diego Prado Gesto
6ad6115327
Modify the firmware checker url to use the new file location
2019-03-21 16:07:26 +01:00
Ghostkeeper
53dc28db89
Change URL of firmware update page for Ultimaker 3 and S5
...
I just got word of a new page to read up about the firmware update. Apparently we now have to link to this one.
Contributes to issue CURA-5483.
2018-10-15 15:12:42 +02:00
Remco Burema
2e3abbc904
Put the firmware-update meta-data in the 'normal' printer definitions and make the code handle that.
2018-10-13 21:55:33 +02:00
Lipu Fei
01d95f51c8
Fix prime blob enabled for S5
...
Still need that enabled = true...
2018-10-10 09:34:30 +02:00
Lipu Fei
6d852228e3
Update ultimaker_s5.def.json
2018-10-10 09:29:42 +02:00
THeijmans
d3101b2fd9
Fixed prim blob visibility
...
Changed the wrong prime_blob setting, now it should be visible but disabled.
2018-10-10 09:26:16 +02:00
THeijmans
d5c86365f8
S5 profile optimizations
...
Removing the prime blob, equalizing flows and avoiding supports.
2018-09-26 15:02:25 +02:00
Lipu Fei
9aea0e5109
Fix quality lookup logic for extruders
...
CURA-5694
- Add convenience functions into GlobalStack
- Use "has_variants" and "has_materials" instead of
"has_variant_materials"
- Remove "has_variant_materials"
- For extruder qualities, skip global qualities if the machine has
variants or materials
2018-09-06 08:12:55 +02:00
Diego Prado Gesto
9873d57286
CURA-5404 Change default retraction distance to 6.5mm for ultimaker3 and
...
S5
2018-05-29 14:48:34 +02:00
Diego Prado Gesto
4e4dc800a7
Merge pull request #3762 from Ultimaker/Optimization
...
PP formula based temperature fixes S5
2018-05-14 13:39:19 +02:00
Kristel88
cf84adfb73
S5 dimensions were incorrect
...
See Jira: CURA-5331
2018-05-14 11:25:55 +02:00
Ruben D
0c51173bed
Disable Connect Infill Lines when using gradual infill
...
Gradual infill causes infill to break up into lots of different areas with different infill densities. Because Connect Infill Lines connects those lines along the border of an infill area, you sometimes get very thin areas with lots of lines going back and forth connecting extremely thin pieces of infill. Sometimes it works fantastically (esp. with mechanical models) but sometimes it really messes up the print.
Contributes to issue CURA-5319.
2018-05-02 17:45:45 +02:00
Ghostkeeper
aec2b9dafe
Add Ultimaker S5 resources
...
The Ultimaker S5 has now been published, so these files may be published as well.
Contributes to issue CURA-5272.
2018-04-23 11:27:13 +02:00
