jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
Ghostkeeper
ac23c9df22
Replace STL meshes with 3MF files
...
These are much smaller than their STL counterparts. This saves on download and installation time. Maybe also on loading time.
2020-04-18 22:40:43 +02:00
Ghostkeeper
4a5673746c
Remove unused default_value overrides
...
These are overrides of default_value while there is a value defined. As such these overrides had no effect at all.
Changing them to value can actually change the behaviour of the profile. That is not what the profile author has apparently tested with, so I'm not doing that. I'm just removing the unused data.
In the future if we get new definitions the author gets notified of the error so that he may test more effectively. The legacy can't be fixed without re-testing, so I'm leaving that to the authors.
Done during Turbo Testing & Tooling. I want to go home for the weekend now...
2019-10-18 18:38:16 +02:00
Ghostkeeper
e26e825d83
Overwrite gantry height value instead of default_value
...
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
2019-05-13 09:30:32 +02:00
Diego Prado Gesto
5b251fc6dc
CURA-5334 Remove machine nozzle size from machine definitions and move
...
it to extruder definitions.
2018-07-04 12:00:38 +02:00
Jack Ha
95f7251486
CURA-5334 remove material_diameter from all printer definitions and also from fdmprinter.def.json
2018-06-12 13:39:29 +02:00
Lipu Fei
aba3795d0b
Add extruder definition for all single-extrusion machines
...
CURA-5334
All changed printers:
- 101Hero
- 3dator
- abax_pri3
- abax_pri5
- abax_titan
- alya3dp
- anycubic_i3_mega
- bfb
- bq_hephestos
- bq_hephestos_2
- bq_hephestos_xl
- bq_witbox
- bq_witbox_2
- creality_cr10
- creality_cr10s4
- creality_cr10s5
- dagoma_discoeasy200
- dagoma_neva
- delta_go
- deltabot
- deltacomb
- easyarts_ares
- fabtotum
- folgertech_FT-5
- gmax15plus
- grr_neo
- imade3d_jellybox
- innovo_inventor
- julia
- kemiq_q2_beta
- kemiq_q2_gama
- kossel_mini
- kossel_pro
- kupido
- makeR_pegasus
- makeR_prusa_tairona_i3
- maker_starter
- makerbotreplicator
- malyan_m180
- malyan_m200
- mankati_fullscale_xt_plus
- mendel90
- monoprice_select_mini_v1
- monoprice_select_mini_v2
- peopoly_moai
- printrbot_play
- printrbot_play_heated
- printrbot_simple
- printrbot_simple_extended
- printrbot_simple_makers_kit
- prusa_i3
- prusa_i3_mk2
- prusa_i3_xl
- raise3D_N2_plus_single
- raise3D_N2_single
- renkforce_rf100
- rigid3d
- rigid3d_3rdgen
- rigid3d_hobby
- rigid3d_mucit
- rigid3d_zero
- rigid3d_zero2
- rigidbot
- rigidbot_big
- robo_3d_r1
- seemecnc_artemis
- seemecnc_v32
- tam
- tevo_blackwidow
- tevo_tarantula
- ubuild-3d_mr_bot_280
- ultimaker2
- ultimaker2_extended
- ultimaker2_extended_plus
- ultimaker2_go
- ultimaker2_plus
- ultimaker_original
- ultimaker_original_plus
- uniqbot_one
- vertex_delta_k8800
- vertex_k8400
- zone3d_printer
- zyyx_agile
2018-06-08 17:05:31 +02:00
Jack Ha
e53d4aaab6
101Hero definition: Set the preferred quality to draft (0.2mm) and remove default layer_height so normal profile is back to 0.1. CURA-5217
2018-05-16 09:35:03 +02:00
Ghostkeeper
dad99f5292
Merge branch 'master' into feature_local_container_server
...
Contributes to issue CURA-4243.
2017-11-29 13:06:08 +01:00
Ghostkeeper
202f7f87f8
Remove ID from definition files
...
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.
Contributes to issue CURA-4243.
2017-11-02 12:53:06 +01:00
ChrisTerBeke
d718e6e36c
Create extruder stack for single extruder machines on start - CURA-4482
2017-10-31 09:08:20 +01:00
Ghostkeeper
4b4f971222
Make 'other' the default category
...
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
2017-08-25 09:17:55 +02:00
Ghostkeeper
c0d96a1d79
Remove heat/cool speeds that are equal to default
...
The default value for both of these settings in fdmprinter is 2.
2017-08-09 09:46:22 +02:00
Jaime van Kessel
dee09e15ae
Added 101hero platform, based on pull request from rmcolbert
...
CURA-4046
2017-07-14 12:59:39 +02:00
Enrico
671ec73131
Add definition file for 101Hero
2017-01-09 22:15:42 +01:00
