8 Commits

Author	SHA1	Message	Date
jspijker	53d8e0c730	Applied printer-linter format ... To make sure we have uniform diffs with our PR's	2022-12-30 22:05:41 +01:00
NOVAXIM	a234c0117e	Update anycubic_mega_zero.def.json ... Line 79: This value (0.3) is the default in firmware. Line 80: The default setting (5) may be too small if you are using Linear Advance.	2022-09-06 13:39:06 +02:00
Jaime van Kessel	2c331604e8	Clean up a lot of duplicate settings from machine profiles ... These were errors that were copy pasted from other definitions. So leaving them as is would continue to decrease the quality of third party profiles.	2022-09-06 11:39:08 +02:00
Konstantinos Karmas	61d18f22b2	Fix combing value not being recognized ... The value of an enum needs to be in single quotes when it is in the "value" field or else it won't be recognized. CURA-7976	2021-09-29 13:35:21 +02:00
Konstantinos Karmas	e1b56f9188	Remove "default_value" since the "value" overrides it ... CURA-7976	2021-09-28 15:38:39 +02:00
Or Bin	590e46cef3	Fixed typo: positionning -> positioning	2020-11-28 22:45:58 +02:00
Ghostkeeper	47bf094c52	Fix internal conflicts within the Anycubic Mega Zero printer ... This definition specified that the maximum E speed is 25mm/s but then said that the retraction speed is 30mm/s. I've changed the maximum E speed to 30mm/s then because apparently that's what the definition author was testing with. This definition specified that the maximum Z speed is 5mm/s but the default Z hop speed is 10mm/s. I've set the Z hop speed to 5mm/s because it was not initially overridden by the definition author, but apparently 5mm/s is the limit. Contributes to issue CURA-7431.	2020-05-07 16:50:04 +02:00
Alexander D. Kanevskiy	d62e7be193	Adding profile for Anycubic Mega Zero ... Dimensions: 220x220x250 Nozzle: 0.4 Print speed: 20-100 (40 for normal quality)	2020-05-02 21:49:48 +03:00