A lot was changed in support. The short of it is that we now think towers should be on by default, but aren't _completely_ certain about it. It makes more sense to do make this change before the beta rather than just before stable, so we have a chance to revert should it prove disastrous.
If this is set to an absolute value, the material settings wont have any effect anymore.
A much better way is to just set the default temperature, which is what the intent is
* Adding Eryone Thinker profile to Cura
- adding printer definition
- adding extruder definition
- adding image plate
- adding platform object
- adding quality profiles
* Minor update eryone_thinker.def.json
Fix initial fan speed
* Improve model textures and draw order
Fixed draw order of model by seperating the mesh into parts and ordering them before export. Add more colors to the texture to allow for more distictant parts.
* Reduced mesh size by remodeling the bed height adjustment wheels.
* Updated Eryone Thinker name to include Series in the name
* Update eryone_thinker.def.json
* Improve End GCode
Ensure we disable bed temp and turn off all fans.
Move the nozzle up by 0.5mm and retract to remove wipe on model top layer.
* Minor fixes to start and end gcode
* Eryone Thinker Profile improvements.
Adding Extra Fast profile.
Added acceleration speed for Fast.
Minor updates to definition for default material to be Eryone PLA and some other setting to work better with profiles.
* Delete eryone_thinker.def.json
* Create eryone_thinker.def.json
* Updating Eryone Thinker Definition
Added changes again due to for reconcile stomping the original
* Update eryone_thinker_fast.inst.cfg
Update the layer height of profile_fast to 0.25mm
* Update eryone_thinker_fast.inst.cfg
Update the layer_height to 0.25mm
* Improving the Eryone Thinker setup
Set Definition to use Monotonic skin by default
Add Fine profile at 0.1 layer height
Change High to 0.15 layer height and number of layers to match
Change Fast to 0.25 layer height and number of layers to match
* Eryone Thinker Profile update, resolving merge
* Eryone Thinker Profile Definition & Quality Clean up
Move all the Normal settings into the core definitions
Move share setting into definition to reduce redundant values for quality profiles
Remove values from definition that match the default fdmprinter definition for easier maintence.
Change definition to only support Monotonic order on top Roof layer.
* Fixing missing [values] from normal profile
* Delete eryone_thinker_extra_fast.inst.cfg
Conflict fix
* Update eryone_thinker_fine.inst.cfg
Fix the setting version incorrectly.
* Eryone Thinker Definition Bug fix for Layer Height 0
Fixing issue when layer_height_0 value was not being resolved correctly in Cura.
* Disable the first layer cooling fan speed
* Update eryone_er20.def.json
* Add the profile
Recovery eryone_thinker_fast.inst.cfg
* Update er20 start gcode and end gcode
1. Update er20 start gcode and end gcode
2. Update nozzle offset
Co-authored-by: Demetrius Apostolopoulos <75643490+dapostol73@users.noreply.github.com>
