Erwan MATHIEU
7a2cb6480c
Enable roofing settings when roofing is actually active
...
CURA-12472
2025-03-17 14:52:51 +01:00
Erwan MATHIEU
5a9b776d2b
Enable flooring settings when flooring is actually active
...
CURA-12472
2025-03-17 14:48:45 +01:00
Erwan MATHIEU
8722fb5e6f
Move settings to experimental
...
CURA-12433
Those settings highly depend on wall_overhang_angle, which is an experimental setting, so they should also be experimental
2025-03-03 15:40:30 +01:00
Erwan MATHIEU
bf1ccd772b
Do not display settings that are useless when overhang is "disabled"
...
CURA-12433
2025-03-03 15:34:49 +01:00
Remco Burema
667a27e2d2
change setting-version for base definitions as well (5.9 -> 5.10)
...
part of CURA-12359
2025-02-26 16:49:50 +01:00
HellAholic
84b60cb00d
Merge branch 'main' into CURA-12335_expose-bottom-skin-settings
2025-02-14 10:08:16 +01:00
HellAholic
4be40f770c
Merge branch 'main' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-02-03 10:05:10 +01:00
HellAholic
a695a27408
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-02-03 09:54:36 +01:00
HellAholic
72e38534e6
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-01-29 10:47:22 +01:00
Frederic Meeuwissen
eec90b5bdc
[PP-535] Add pressure advance setting
2025-01-29 09:35:28 +01:00
Erwan MATHIEU
51a7cb1f90
Add extra settings for flooring on the basis of roofing
...
CURA-12335
2025-01-27 10:05:52 +01:00
HellAholic
bbf7b4dde0
Merge branch 'main' into CURA-12362_Cheetah_flavor
2025-01-23 10:41:38 +01:00
HellAholic
e8b2abad1e
Merge branch 'main' into flip_toolhandle_y_description
2025-01-23 09:58:27 +01:00
HellAholic
0f0af30761
Merge branch 'main' into CURA-12362_Cheetah_flavor
2025-01-22 13:38:45 +01:00
Erwan MATHIEU
a13726bba1
Move interlocking settings out of experimental
...
CURA-12247
Also set interlocking_enable to basic settings because it is quite important and just enabling it doesn't require advanced knowledge/skills.
2025-01-22 09:54:20 +01:00
Erwan MATHIEU
ffb4521059
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-01-20 14:53:55 +01:00
HellAholic
e6d2281f32
Merge branch 'main' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-01-17 14:10:23 +01:00
Erwan MATHIEU
3276fc2eb6
Add setting to filter out layers that have small overhanging faetures
...
conan-package-resources / conan-package (push) Failing after 0s
conan-package / conan-package (push) Failing after 0s
printer-linter-format / Printer linter auto format (push) Failing after 1s
unit-test / Run unit tests (push) Failing after 0s
CURA-12352
2025-01-09 13:54:58 +01:00
Frederic Meeuwissen
2ad64e13db
Introduce Cheetah flavor
2024-12-18 18:21:00 +01:00
Erwan MATHIEU
29cb2b121c
Polish setting name and description
...
CURA-12236
2024-12-18 10:24:29 +01:00
Erwan MATHIEU
a8860017c7
Add setting for inner combing distance to walls
...
CURA-12236
2024-12-16 15:43:13 +01:00
Erwan MATHIEU
078fccc839
Add setting for minimum layer time with overhang
...
CURA-12352
2024-12-16 13:25:41 +01:00
Erwan MATHIEU
9735bcf64b
Remove previous single overhang angle
2024-12-13 11:39:37 +01:00
Erwan MATHIEU
d5b4cad205
Improve setting description
...
CURA-11966
2024-12-12 15:59:48 +01:00
Erwan MATHIEU
f9e138d4c5
Add setting for multi-value overhang speed reduction
...
CURA-11966
2024-12-10 12:53:56 +01:00
HellAholic
4c686afcb6
Update machine head & fan polygon description
...
Greg's proposal:
add details to clarify what the Y min & Y max refer to.
Previous description was unclear and referred to front of print head as being a negative value which is not accurate.
2024-12-09 08:23:40 +01:00
Erwan MATHIEU
0286c6dda8
Merge remote-tracking branch 'origin/5.9'
2024-11-20 13:11:12 +01:00
Andreea Scorojitu
671247c7cb
Merge pull request #19907 from Ultimaker/CURA-12292_Seam-Corner-Preference-should-not-be-visible-for-User-Specified-or-Shortest
...
Display corner preference only with sharpest corner
2024-11-15 12:04:02 +01:00
Erwan MATHIEU
55e91cdb48
Add warning limit for scarf seam suspicious length
...
CURA-12301
2024-11-14 10:03:16 +01:00
Erwan MATHIEU
079fd09217
Display corner preference only with sharpest corner
...
CURA-12292
2024-11-14 09:56:20 +01:00
HellAholic
d59e65fb1d
Merge pull request #19875 from Ultimaker/CURA-12270_this-is-confusing
...
CURA-12270 rename setting to avoid confusions
2024-11-08 13:24:51 +01:00
HellAholic
2c42766b6b
Merge pull request #19799 from Ultimaker/CURA-12188_build_plate_z_fighting
...
[CURA-12188] Fix build plate z-fighting
2024-11-08 11:26:34 +01:00
Erwan MATHIEU
f8fb33928d
Rename Outer Wall Acceleration to avoid doubles
...
CURA-12270
2024-11-08 10:18:25 +01:00
Erwan MATHIEU
94b8728962
Merge remote-tracking branch 'origin/5.9'
2024-11-07 09:44:40 +01:00
Erwan MATHIEU
5ef569d8ce
Set only UM variants name as being translated
...
CURA-12255
Also applied some consistency between labels, so that they are more consistent and more printers get their variants name translated.
2024-11-06 10:55:43 +01:00
Remco Burema
c89b708525
Make grid-translucency depend on if machine has texture on BP.
...
part of CURA-12188
2024-11-05 20:44:25 +01:00
Erwan MATHIEU
d730f42f5f
Allow very high acceleration and deceleration
...
CURA-12235
2024-10-30 13:48:44 +01:00
Erwan MATHIEU
3b374368c4
Merge remote-tracking branch 'origin/5.9'
2024-10-22 10:43:28 +02:00
Erwan MATHIEU
e06ed86709
Set warning and enable settings if necessary
...
CURA-12195
2024-10-21 11:17:26 +02:00
Jaime van Kessel
aaff84ce77
Merge branch 'main' of https://github.com/TheSin-/Cura
2024-10-10 14:09:18 +02:00
HellAholic
583a5b75fe
Merge pull request #19725 from Ultimaker/CURA-12078_inconsistent-wall-speed-besides-overhang
...
[CURA-12078] Clarify new behaviour of overhanging wall to user.
2024-10-09 14:10:09 +02:00
Erwan MATHIEU
9f348b6612
Apply final scarf seam descriptions adjustment
2024-10-09 14:01:36 +02:00
Erwan MATHIEU
f2944a6de3
Adjust scarf seam settings names/descriptions for better understanding
2024-10-08 18:20:24 +02:00
Remco Burema
5a73ff7271
Clarify new behaviour of overhanging wall to user.
...
part of CURA-12078
2024-10-08 14:45:18 +02:00
Erwan MATHIEU
df4240474c
Bump setting_version
...
It currently doesn't match the version expected in the upgrade script.
2024-10-08 13:43:56 +02:00
HellAholic
23fa935778
Merge branch 'main' into PP-521_Fix_adhesion-type_resolve-logic
2024-10-07 10:10:53 +02:00
Erwan MATHIEU
fe5c81a59c
Merge branch 'main' into CURA-12081_scarf-seam
2024-10-04 11:57:02 +02:00
Erwan MATHIEU
1d28f7d778
Move scarf seam and acceleration/deceleration to experimental
...
CURA-12077
2024-10-04 11:56:17 +02:00
Paul Kuiper
2c63e33b01
Prevent abstract color profiles to be filtered out for machines that support them.
...
CURA-11634
2024-09-26 13:35:55 +02:00
Erwan MATHIEU
f0cbd8e802
Restore lost change after an errored merge
...
This reverts commit 946bf033066e561827da4d00afbc3b680cd7e552.
2024-09-19 11:00:09 +02:00
