This is necessary to ensure that all printers use a valid prime tower position, now that the position computation rule has changed and includes the base/brim.
CURA-10783
With the changes from https://github.com/Ultimaker/Cura/pull/15692 logic regarding the exclude materials printer setting changed. It has never worked properly before. Now that it works properly again a ton of materials were excluded that were never intended to be excluded.
As we can never be sure if an exclude material was intended or not we decided to be pretty agressive in removing exclude materials. This way the behavior is closed to the behavior prior to the exclude material fix.
There was one case were we decide to leave an exclude material in. If a printer has a material diameter of `175` *and* the material would specifically specify the `175` substring (e.g. `dsm_arnitel2045_175`). When this is the case we were pretty certain it was intended to exclude this material.
CURA-10599
If this is set to an absolute value, the material settings wont have any effect anymore.
A much better way is to just set the default temperature, which is what the intent is
We'll offer the option to print from outside to inside, from inside to outside, or from inside to outside except that the very innermost centre wall is printed last.
Contributes to issue CURA-8109.
Previously, the ironing_inset was changed in the profiles to reflect
the changes made in the CuraEngine. This inset though was not taking
into account the ironing_pattern (in the CuraEngine, the inset is
compensated differently depending on the pattern).
This commit fixes that in the version upgrader and the printer
definitions in order to maintain the same behavior for the old
profiles.
CURA-7318
The slicer has been adjusted to give this setting a more logical function: It should be an inset of the outer edge of ironing as it appears in layer view where the lines are made thinner according to their flow.
As a result all of the slices with ironing have changed. This adjusts the setting value so that the actual slice output will not change, just the appearance of the setting.
Contributes to issue CURA-7318.
Conflicts:
resources/quality/hms434/pla/hms434_0.4_pla_high.inst.cfg -> Setting version was updated at the same time.
resources/quality/hms434/pla/hms434_0.4_pla_normal.inst.cfg -> Deleted while we updated setting version.
resources/quality/hms434/pla/hms434_0.8_pla_coarse.inst.cfg -> Deleted while we updated setting version.
resources/quality/hms434/pla/hms434_0.8_pla_normal.inst.cfg -> Deleted while we updated setting version.
Conflicts:
plugins/VersionUpgrade/VersionUpgrade460to462/VersionUpgrade460to462.py -> On master we removed the getCfgVersion function, while we moved the entire plug-in to a different folder in 4.6.
resources/definitions/skriware_2.def.json -> On master we merged a PR that changes more or less all settings, while on 4.6 we doubled the maximum deviation.
