HellAholic
ec130064d7
Merge pull request #20427 from Ultimaker/PP-601-Method-temperatures
...
PP-601 Method Temperatures
2025-03-21 16:31:55 +01:00
Alan Bjorklund
fa0624784b
machine_min_cool_heat_time_window=0 for Method
...
PP-601
2025-03-21 12:32:01 +01:00
Erwan MATHIEU
ed7372b380
Revert "Merge pull request #20129 from Ultimaker/PP-544-HS-Method"
...
This reverts commit 53f4046a513ea3e341bde572d237409cd0e9bf8f, reversing
changes made to f2ebf160a5770a8ed9a2e32153f4380011eb51cd.
2025-03-21 10:24:55 +01:00
Frederic98
b01b3be245
[PP-600] Reduce S8 travel speed to 300
2025-03-20 10:05:53 +01:00
HellAholic
65e3a3666e
Apply printer-linter format
2025-03-19 10:29:28 +00:00
HellAholic
e1baa171c3
capitalization
2025-03-19 11:28:03 +01:00
Remco Burema
3fbfca48d8
Fix fallback setting error.
2025-03-18 16:14:50 +01:00
HellAholic
b363752f55
Merge pull request #20402 from Ultimaker/PP-595-Cura-5.10-stable-update
...
PP-595 Cura 5.10 stable profile updates
2025-03-17 17:15:53 +01:00
Paul Kuiper
24c749c64b
Reduce the warning limits such that they do not overlap the max limits.
...
PP-595
2025-03-17 17:08:15 +01:00
Paul Kuiper
d1b0a59565
Update S8 profiles:
...
- Adjust warning levels to reflect the new motion limits
- Enable floor layers (0 to 1) to improve bottom quality
- Use normal prime tower (iso interleaving) for improved robustness
- Increase skirt/brim length to ensure a good start of extrusion
- Increase support line width from 0.4mm to 0.5mm for sturdier tree supports
- Reduce support speed to wall_speed to improve tree support robustness
PP-595
2025-03-17 15:19:59 +01:00
Erwan MATHIEU
7a2cb6480c
Enable roofing settings when roofing is actually active
...
CURA-12472
2025-03-17 14:52:51 +01:00
Erwan MATHIEU
5a9b776d2b
Enable flooring settings when flooring is actually active
...
CURA-12472
2025-03-17 14:48:45 +01:00
HellAholic
d2cd3df88d
Merge branch '5.10' into PP-592-Fix-issues-from-beta-test
2025-03-10 10:38:35 +01:00
Frederic98
41cd893e09
PP-592
2025-03-07 16:51:52 +01:00
HellAholic
5d2856c195
backleft can stay
2025-03-07 16:32:15 +01:00
HellAholic
78e62635dd
Remove redundant overrides
...
This will unlock the z seam x and z seam y, otherwise the z seam would not update from x 150 and y 180 position
2025-03-07 16:03:07 +01:00
HellAholic
b25ad27599
Merge pull request #20342 from Ultimaker/CURA-12433_minimum-layer-without-overhang
...
CURA-12433 minimum layer without overhang
2025-03-05 11:53:32 +01:00
Erwan MATHIEU
8722fb5e6f
Move settings to experimental
...
CURA-12433
Those settings highly depend on wall_overhang_angle, which is an experimental setting, so they should also be experimental
2025-03-03 15:40:30 +01:00
Erwan MATHIEU
bf1ccd772b
Do not display settings that are useless when overhang is "disabled"
...
CURA-12433
2025-03-03 15:34:49 +01:00
Paul Kuiper
f2098b570f
Moved flooring settings from ultimaker.def.json to the S8 only to reduce risk. Added support_wall_count is 2 (forgot this in the original commit).
...
PP-580
2025-02-28 10:28:01 +01:00
HellAholic
ec4a19c0e4
Merge branch '5.10' into PP-580-Improve-self-support
2025-02-28 09:31:43 +01:00
Paul Kuiper
8aacf63f4a
Improved self-support settings for the S8. Better release due to the horizontal expansion. More robustness due to brims, and larger build plate trunks and avoid travel over support. Faster printing due to higher support speeds and less tree branches.Improved part strength due to higher infill flow rates. Added 1 flooring layer to all Ultimaker machines to improve bottom part quality. Small bug fixes to the sketch/replicator profiles. Updated settings version def files.
...
PP-580
PP-581
2025-02-27 11:50:57 +01:00
Remco Burema
667a27e2d2
change setting-version for base definitions as well (5.9 -> 5.10)
...
part of CURA-12359
2025-02-26 16:49:50 +01:00
Erwan MATHIEU
3458ce1d10
Merge pull request #20297 from Ultimaker/PP-571-Improve-multi-material-printing-quality-S8
...
PP-571-Improve-multi-material-printing-quality-S8
2025-02-21 11:23:50 +01:00
Alan Bjorklund
94e57a1155
Sprint Tree Supports Update
...
The tree supports inherited settings that
were tuned for Normal Support. The support floor
connection to model roofs was weak, and causing
some trees to detach (depending on the model
geometry). Sometimes the nozzle to collided
with the broken support, and resulted in XY shifts,
and the fan cover disconnecting while printing.
Additionally, I adjusted the support Z distance
values for layers heights > 0.2.
The new settings allow for better tree support
adhesion, improving the print success rate.
PP-573
2025-02-20 16:29:07 -05:00
THeijmans
0ba901e345
PP-571 Improve multi-material printing quality S8
2025-02-20 14:17:34 +01:00
Remco Burema
6cdd537f89
Merge pull request #20200 from Ultimaker/PP-538_Replicator-plus
...
PP-538 Initial Profiles for Replicator+
2025-02-19 10:15:15 +01:00
HellAholic
f1b5da20d4
Merge branch 'main' into CURA-12416-adjustment_for_unit_tests
2025-02-14 15:45:30 +01:00
HellAholic
26cac4a131
Revert "Update ultimaker_s8.def.json"
...
This reverts commit 0771b38c913df7fbed33d4b9e862c810ae3e96b9.
2025-02-14 15:34:19 +01:00
HellAholic
524ec70012
Revert "Update ultimaker_s8.def.json"
...
This reverts commit 63429d76264b0f47c312e3f877fb3e5ddf742bb2.
2025-02-14 15:33:25 +01:00
Frederic Meeuwissen
ac06e913d2
Remove non-existent "support_density" setting
2025-02-14 15:24:23 +01:00
HellAholic
cbb63249b3
Apply printer-linter format
2025-02-14 14:20:56 +00:00
HellAholic
f2389104a9
Setting override name correction skirt_brim_speed
2025-02-14 15:19:45 +01:00
HellAholic
5229844eed
Merge pull request #20191 from Ultimaker/CURA-12335_expose-bottom-skin-settings
...
CURA-12335 Add extra settings for flooring on the basis of roofing
2025-02-14 14:39:36 +01:00
HellAholic
0771b38c91
Update ultimaker_s8.def.json
2025-02-14 14:25:00 +01:00
HellAholic
63429d7626
Update ultimaker_s8.def.json
2025-02-14 14:17:29 +01:00
HellAholic
d83547e3f2
Merge pull request #20198 from Ultimaker/PP-550-PCABS
...
PP-550 PC-ABS & PC-ABS-FR 175
2025-02-14 10:26:02 +01:00
HellAholic
84b60cb00d
Merge branch 'main' into CURA-12335_expose-bottom-skin-settings
2025-02-14 10:08:16 +01:00
Frederic98
0598ebec6f
Apply printer-linter format
2025-02-13 07:23:45 +00:00
Frederic Meeuwissen
dd742e6c4e
[PP-535] Correct the BOM number in FW update
2025-02-13 08:22:21 +01:00
Frederic Meeuwissen
fbe5e4f6c0
[PP-535] Publish S8 profiles
2025-02-12 15:57:45 +01:00
Erwan MATHIEU
b1dda135fd
Merge branch 'main' into PP-538_Replicator-plus
2025-02-11 16:36:01 +01:00
Erwan MATHIEU
74f7f43754
Merge branch 'main' into PP-550-PCABS
2025-02-11 14:05:21 +01:00
HellAholic
d5649ace05
Merge pull request #20201 from Ultimaker/Kedge-Draft-PP-561
...
PP-561 0.27 layer height options for Sprint
2025-02-10 11:45:13 +01:00
Alan Bjorklund
c0a734a1ac
Corrected Rep+ zero speed values
...
Some speed values were set to zero accientally,
these updates ensure that all speed params have
non zero values.
Also, I noticed some temperatures were not correct.
I added a few changes to correct layer_0, initial,
and final print temperature values.
The default print temp is still not correct, I will
submit another commit for this.
PP-538
2025-02-07 17:35:05 -05:00
HellAholic
cc7eb2c218
Merge branch 'main' into PP-550-PCABS
2025-02-07 16:45:06 +01:00
HellAholic
53f4046a51
Merge pull request #20129 from Ultimaker/PP-544-HS-Method
...
Add intent profiles for Method High Speed
2025-02-07 13:24:32 +01:00
Erwan MATHIEU
8a77993d0b
Merge branch 'main' into Kedge-Draft-PP-561
2025-02-06 16:18:42 +01:00
Erwan MATHIEU
4c6acca3f8
Merge branch 'main' into PP-538_Replicator-plus
2025-02-06 16:14:45 +01:00
Erwan MATHIEU
235114ba53
Merge remote-tracking branch 'origin/main' into PP-550-PCABS
2025-02-06 16:10:04 +01:00
