wawanbreton
6c8ee8d98a
Applied printer-linter format
2024-02-16 08:05:52 +00:00
Erwan MATHIEU
5a291f9ba9
Change prime_tower_enable to prime_tower_mode in all defs/profiles
2024-02-16 09:04:48 +01:00
Theodor Hansson
fab683a11b
added slight temp increase to zyyx carbon nozzle
2024-02-14 00:42:42 +01:00
Theodor Hansson
63b71e6a7d
Updated ZYYX Pro profiles
2024-02-14 00:18:57 +01:00
Theodor Hansson
4ca69d94a6
Updated ZYYX Pro profiles
2024-02-13 18:56:17 +01:00
Theodor Hansson
37398b2345
Added 1.2 profile to ZYYZ Pro
2024-02-13 14:11:12 +01:00
Paul Kuiper
860dbaa4fe
Added experimental print profiles for the Method X and XL: ASA, Nylon12-CF and SR-30 support material.
...
PP-393
2024-02-13 11:32:58 +01:00
Theodor Hansson
7c9d5d2faf
Updated infill pattern for some ZYYX+ profiles
2024-02-13 00:16:05 +01:00
Theodor Hansson
66c6f59675
Added quality presets to zyyx+
2024-02-12 21:56:21 +01:00
Jaime van Kessel
234a8115b9
Merge pull request #18269 from Ultimaker/PP-389-Increase_retraction-minimal-travel-distance
...
PP-389 Increase minimum retraction distance
2024-02-12 14:03:01 +01:00
Jaime van Kessel
4e84bcf6bf
Merge pull request #18137 from Ultimaker/PP-386-Increase-part-strength
...
PP-386 Increase part strength of high speed modes
2024-02-12 13:58:55 +01:00
Theodor Hansson
96e76eaa50
zyyx+ and agile quality now has subfolders
2024-02-11 00:16:45 +01:00
Theodor Hansson
f1f0f044c4
moved zyyx profiles into subdirectories
2024-02-10 23:59:33 +01:00
Paul Kuiper
2d82bb94ab
Set retraction_min_travel to 5mm for all S-line and Method machines. This improves the infill pattern wall overlaps (for TPU top surfaces and raft base layers) and reduces the amount of retracts in tree supports islands.
...
It also cleans up the settings.
PP-389
2024-02-08 16:20:02 +01:00
Paul Kuiper
4bb5eed97e
Bug fix: Do not sett the z distance for the AA0.8 cores of T-PLA.
...
PP-424
2024-02-06 10:57:25 +01:00
Paul Kuiper
03abc91bda
Improved self support z distance settings for Ultimaker PLA, T-PLA, PETG and ABS
...
PP-424
2024-02-05 11:35:44 +01:00
august.chi
8232cd9cb6
Based on the reviewer's feedback, I have made some changes:delete params defined in parent definition
...
Signed-off-by: august.chi <august.chi@anker-in.com>
2024-02-02 19:43:11 +08:00
AnkerBinary-Liu
da4e3f3082
Merge branch 'Ultimaker:main' into Cura_ankermake_august
2024-02-02 17:04:25 +08:00
nallath
d490effcbd
Applied printer-linter format
2024-01-31 12:46:58 +00:00
Jaime van Kessel
0f0cf3e723
Merge pull request #17754 from Nu-hin/ratrig-squash
...
Add RatRig printers configurations
2024-01-31 13:45:48 +01:00
nallath
3793d4acbe
Applied printer-linter format
2024-01-31 12:38:21 +00:00
Jaime van Kessel
3b26c583c9
Merge branch 'main' of github.com:Ultimaker/Cura
2024-01-31 13:37:24 +01:00
Jaime van Kessel
c93848f884
Merge branch 'main' of https://github.com/Jeremie-C/CuraAdventurer
2024-01-31 13:31:31 +01:00
Saumya Jain
d141c8c0ec
Merge branch 'main' into voron-nozzles
2024-01-31 13:09:29 +01:00
Paul Kuiper
18fabe468b
Increase part strength of high speed modes by compensating for the slip at high flow rates.
...
PP-386
2024-01-26 12:38:09 +01:00
Theodor Hansson
f9836c0303
Initial commit of zyyx profiles
2024-01-25 15:43:46 +01:00
Paul Kuiper
86d5c945d0
Add cool fan speed = 0 to the initial layer of Ultimaker ABS.
...
Fix high speed profile T-PLA (was still generic profile). Mistake in PP-391, but taken along in this PR.
PP-422
2024-01-22 11:42:30 +01:00
Paul Kuiper
5f3e49bdbf
Restore old z support formula.
...
PP-391
2024-01-18 13:48:14 +01:00
Paul Kuiper
80d5662a78
Regenerated from autogenerate
...
PP-391
2024-01-18 13:43:59 +01:00
Erwan MATHIEU
2f6080e9fe
Merge branch 'main' into PP-422-ABS-AA025-reduce-fanspeed
2024-01-18 08:35:13 +01:00
Paul Kuiper
668a527d33
Reduce initial layer speed to improve reliability for S3 and S5 machines when no glue is used.
...
PP-421
2024-01-17 13:24:34 +01:00
Paul Kuiper
16737dccf2
Set initial fan speed for AA0.25 ABS 0.1mm print mode to 0% to increase adhesion robustness.
...
PP-422
2024-01-10 10:02:46 +01:00
Remco Burema
c64dcb785c
Remove 'support_interface_skip_height' setting.
...
Was used for run-time efficiency, but it wasn't really ever set beyond one layer-height, which made it rather useless.
frontend part of CURA-11157 -- needed version upgrader as well, since it's the first alteration
2024-01-10 08:55:56 +01:00
Nikita Chernukhin
f6cc7993e1
Add RatRig printers configurations
...
Added configurations for the following RatRig printers:
* RatRig V-Core 3 (200mm, 300mm, 400mm and 500mm versions)
* RatRig V-Minion
V-Core 3.1 modification is also supported.
Bed meshes are taken from https://github.com/slic3r/slic3r-profiles with kind permission of the author @HelgeKeck
2024-01-05 16:46:40 +01:00
Christian Kunis
5fac8e4953
Automated refactoring
2023-12-30 12:00:44 -05:00
Christian Kunis
44105584d9
Merge branch 'main' into voron-nozzles
2023-12-30 11:08:01 -05:00
Christian Kunis
2f7cc785d4
Update TPU profiles to half default print speed
2023-12-30 11:00:32 -05:00
august.chi
f4e8a13b7a
fix: add a new machine named M5C for ankermake
...
Signed-off-by: august.chi <august.chi@anker-in.com>
2023-12-11 18:47:46 +08:00
c.lamboo
4ce092837e
Merge branch '5.6'
...
# Conflicts:
# conanfile.py
2023-11-24 10:24:52 +01:00
Casper Lamboo
08f46fcff0
Merge pull request #17315 from Ultimaker/PP-399-Shrinkage-compensation-Method-materials
...
Shrinkage compensation method materials
2023-11-16 12:48:52 +01:00
Paul Kuiper
c089248625
- ABS-R print profiles for ABS-R with the 1C extruder
2023-11-16 09:12:24 +01:00
Jelle Spijker
efafe1503d
Merge branch '5.6'
...
# Conflicts:
# conanfile.py
# resources/definitions/ultimaker_methodx.def.json
# resources/definitions/ultimaker_methodxl.def.json
2023-11-15 13:53:39 +01:00
Christian Kunis
92526be4f0
Merge branch 'Ultimaker:main' into voron-nozzles
2023-11-14 12:53:42 -05:00
Paul Kuiper
c15e52399c
- Removed step correction from z shrinkage compensation for the Method X
...
- Changed step size tfrom 0.2mm to 0.203mm for Method X
- Added material compensations for ABS-R and ABS-CF
- New resolve formula in fdmprinter.def.json to not use the shrinkage factors of support materials
2023-11-14 14:32:42 +01:00
Casper Lamboo
2215b452b8
Merge pull request #17279 from Ultimaker/PP-387_Pillowing_PETG_AA08
...
Increase bridging flowrate on AA 0.8 at 0.2 layers
2023-11-13 09:59:32 +01:00
Frederic Meeuwissen
5f69c89309
Increase bridging flowrate on AA 0.8 at 0.2 layers
2023-11-10 14:24:44 +01:00
Casper Lamboo
6c481bb54e
Merge pull request #17240 from Ultimaker/CURA-11277_rename_LABS_extruder
...
[CURA-11277] Rename Method Lab extruder to LABS
2023-11-06 14:13:27 +01:00
Casper Lamboo
cc86f6ad4d
Merge pull request #17194 from Ultimaker/PP-387_Pillowing_PETG_AA08
...
Set bridging flow to 200 for PETG AA08 02
2023-11-06 13:45:59 +01:00
Erwan MATHIEU
26f472c0a2
Rename Method Lab extruder to LABS
...
CURA-11277
2023-11-06 12:07:09 +01:00
Erwan MATHIEU
5eb5387237
Merge remote-tracking branch 'origin/5.6'
2023-11-03 14:12:29 +01:00
