Erwan MATHIEU
b4573a3bae
Merge pull request #20052 from Ultimaker/PP-549_fix_sketch_sprint_cloud
...
[PP-549] Fix cloud connection for Sketch Sprint and Large
2025-02-04 10:08:30 +01:00
HellAholic
28cf7daf76
Merge pull request #20039 from Ultimaker/CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
...
CURA-12352 Different minimum layer time for layers that contain overhangs
2025-02-03 11:02:12 +01:00
HellAholic
4be40f770c
Merge branch 'main' into CURA-12352_different-minimum-layer-time-for-layers-that-contain-overhangs
2025-02-03 10:05:10 +01:00
HellAholic
896b401561
Merge pull request #20040 from Ultimaker/CURA-11966_reduce-speed-on-overhang
...
CURA-11966 Reduce speed on overhang
2025-02-03 10:04:21 +01:00
HellAholic
a695a27408
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-02-03 09:54:36 +01:00
c.lamboo
c72cb23466
Update pynavlib dependency
...
CURA-12261
2025-01-31 10:46:54 +01:00
Alan Bjorklund
f039e90132
Moved 0.27 profiles into "imperial" quality
...
This commit corrects the filenames in the previous
commit. Profiles with 0.27 layer height had "0.3"
in the filename. Now they are correctly named as
0.27.
PP-561
2025-01-30 14:28:09 -05:00
HellAholic
23cb08ed4f
Merge pull request #20193 from Ultimaker/CURA-12150-add-a-global-preference-for-USB-printing
...
CURA-12150 Add local preference to monitor use of USB writing
2025-01-30 11:13:32 +01:00
HellAholic
67d8535f31
Merge branch 'main' into CURA-12150-add-a-global-preference-for-USB-printing
2025-01-30 09:58:54 +01:00
HellAholic
cd6827cbaf
Merge pull request #20208 from Ultimaker/PP-535_add_pa_setting
...
[CURA-12389][PP-535] Add pressure advance setting
2025-01-30 09:26:35 +01:00
HellAholic
a62ed73abe
Merge pull request #20194 from Ultimaker/CURA-12224_handle-LOOOONG-setting-names
...
CURA-12224 handle loooong setting names
2025-01-30 09:13:24 +01:00
HellAholic
1b485824cf
Merge branch 'main' into PP-535_add_pa_setting
2025-01-30 08:48:41 +01:00
HellAholic
9295382914
Merge pull request #20210 from Ultimaker/CURA-12020_defensive_round
...
[CURA-12020] Round layer height to two decimals for display (profile) purposes.
2025-01-29 16:21:48 +01:00
HellAholic
654150526e
Merge branch 'main' into CURA-12335_expose-bottom-skin-settings
2025-01-29 15:50:00 +01:00
HellAholic
d765f33b1c
Merge pull request #20115 from Ultimaker/CURA-12313_conditional-Baxis-commands
...
CURA-12313 Use single extruder when exporting for Replicator+
2025-01-29 15:43:33 +01:00
HellAholic
1e6afd75c7
Merge branch 'main' into CURA-12313_conditional-Baxis-commands
2025-01-29 14:12:37 +01:00
HellAholic
150a267bb7
switch from branch to stable in conandata for dulcificum
2025-01-29 14:05:14 +01:00
HellAholic
49cc44b4ec
Merge pull request #19983 from Ultimaker/fix_crash_on_material_management_sovol_sv01
...
"Sovol Base Bowden Printer" update to add resolveOrValue to retraction_speed override
2025-01-29 14:02:51 +01:00
HellAholic
628c852054
Merge pull request #20169 from Ultimaker/CURA-12368_mismatched_core_warning
...
[CURA-12368] Warn for mismatched cores on multi-config printers.
2025-01-29 13:54:47 +01:00
HellAholic
40f738f15f
Applied printer-linter format
2025-01-29 12:49:58 +00:00
HellAholic
0680a21670
apply review comment
2025-01-29 13:48:59 +01:00
Remco Burema
05f6afd93d
Round layer height to two decimals for display (profile) purposes.
...
CURA-12020
2025-01-29 13:20:01 +01:00
HellAholic
72e38534e6
Merge branch 'main' into CURA-11966_reduce-speed-on-overhang
2025-01-29 10:47:22 +01:00
Frederic Meeuwissen
eec90b5bdc
[PP-535] Add pressure advance setting
2025-01-29 09:35:28 +01:00
Erwan MATHIEU
0fabbdcaf8
Merge branch 'main' into CURA-12371
2025-01-29 07:19:19 +01:00
Alan Bjorklund
859327b3ba
Sketch infill line width update
...
Add logic that sets the infill width to 0.4
when the layer height is not equal to 0.2.
The infill width at 0.45mm was causing the
flow rate to be > 30 mm^3/s for 0.27 Balanced
prints. This update corrects the flow rate issue.
PP-561
2025-01-28 17:42:57 -05:00
shirleydu
c4fd72483f
Apply printer-linter format
2025-01-28 22:19:09 +00:00
Shirley Du
f4ea52220e
Revert "Missed a file"
...
This reverts commit e75c6968d98b8510f441d0caa553733c7acaa5ab.
2025-01-28 17:17:46 -05:00
Shirley Du
868e74e84b
For Method, enable corner rounding/input shaping if using highspeed type intents
2025-01-28 17:14:34 -05:00
HellAholic
ebedb66ae1
Merge branch 'main' into CURA-12224_handle-LOOOONG-setting-names
2025-01-28 11:29:24 +01:00
HellAholic
2d1610698c
Merge branch 'main' into CURA-12150-add-a-global-preference-for-USB-printing
2025-01-28 11:28:27 +01:00
Erwan MATHIEU
c369a405b3
Set dynamic items size
...
CURA-12368
2025-01-28 10:34:58 +01:00
Remco Burema
669c28e618
Try to make unavailable configuration warnings less confusing.
...
part of CURA-12368
2025-01-28 09:20:47 +01:00
HellAholic
ccbd53761c
Merge pull request #20118 from Ultimaker/PP-552-Metallic-PLA
...
Add metallic PLA quality files for Sketch printers
2025-01-28 08:22:47 +01:00
Alan Bjorklund
a7c234862a
Add 0.27 layer height options for Sprint
...
Enable PLA and TPLA at 0.27 layer height via
Balanced & Draft mode options.
Draft mode has higher acceleration values, and
adjusted overhang settings. Also additional minor
settings changes such as first layer height, and
initial cooling fan.
PP-561
2025-01-27 18:02:54 -05:00
Alan Bjorklund
8db6c820aa
Initial Profiles for Replicator+
...
Add definition for Replicator+, along
with three extruders: SE+, SE+ Tough,
and SE+ Experimental.
Add Replicator+ settings for PLA & TPLA.
These are similar to Method settings,
with some first layer adjustments.
PP-538
2025-01-27 17:03:00 -05:00
Alan Bjorklund
9830cb5804
Improvements to PC-ABS 175 self support
...
PC-ABS & PC-ABS-FR 175 profile adjustments
for self support to prevent under-extrusion
while still printing a delicate support
structure that is easy to remove.
These changes include fan speeds, line
widths, material flow settings, and print speeds.
PP-550
2025-01-27 16:24:31 -05:00
Erwan MATHIEU
2e59a0a009
Give more space to text when required
...
CURA-12224
This way, multi-lines setting names can be properly displayed
2025-01-27 15:24:42 +01:00
Erwan MATHIEU
3b2d0fd8af
Slightly reduce the width of setting fields
...
CURA-12224
This gives more space for the text, which can sometimes be very long
2025-01-27 15:23:55 +01:00
Erwan MATHIEU
04a6ecf7ca
Add local setting to monitor use of USB writing
...
CURA-12150
2025-01-27 14:41:18 +01:00
Erwan MATHIEU
caa944e226
Merge branch 'main' into PP-552-Metallic-PLA
2025-01-27 13:53:42 +01:00
Erwan MATHIEU
51a7cb1f90
Add extra settings for flooring on the basis of roofing
...
CURA-12335
2025-01-27 10:05:52 +01:00
c.lamboo
983d0a43c3
combine hashes for pynavlib dependency
...
CURA-12261
2025-01-24 14:18:18 +01:00
c.lamboo
b282712299
Fix syntax error in pynavlib dependency
...
CURA-12261
2025-01-24 14:09:05 +01:00
c.lamboo
6c9b33f6a7
Fix syntax error in pynavlib dependency
...
CURA-12261
2025-01-24 13:49:07 +01:00
c.lamboo
539e627365
Move pynavlib dependency to any_os section
...
CURA-12261
2025-01-24 13:45:09 +01:00
c.lamboo
f3593bacbf
Merge remote-tracking branch 'origin/CURA-12261-3dconnectionmouse' into CURA-12261-3dconnectionmouse
2025-01-24 13:25:16 +01:00
c.lamboo
7eb9b15dc7
Pin cura package version
...
CURA-12261
2025-01-24 13:24:57 +01:00
casperlamboo
c63c697714
Apply printer-linter format
2025-01-24 12:23:55 +00:00
c.lamboo
7a962216fb
Merging CURA-7435_3DConnexionII
2025-01-24 13:20:41 +01:00
