2002 Commits

Author	SHA1	Message	Date
Ghostkeeper	af42340e68	Slightly increase resolution by default ... Most Marlin installations should be able to handle a bit more. Contributes to issue CURA-6458.	2019-04-17 12:48:22 +02:00
Jaime van Kessel	acf7229d1d	Merge pull request #5620 from Ultimaker/add_maximum_deviation_setting ... Add maximum deviation setting	2019-04-16 14:50:56 +02:00
Ghostkeeper	96abaf2376	Adjust warning values for maximum travel resolution ... Due to the change in tactics to limit resolution by deviation, this can be increased quite a lot (as long as you don't increase deviation too much).	2019-04-16 14:02:13 +02:00
Ghostkeeper	3771040c04	Adjust warning values for maximum resolution ... Due to the change in tactics to limit resolution by deviation, this can be increased quite a lot (as long as you don't increase deviation too much).	2019-04-16 14:02:05 +02:00
Ghostkeeper	6325a5f1c2	Change setting value defaults for maximum resolution to use deviation ... All profiles that use maximum resolution should use maximum deviation instead, and halve it. Contributes to issue CURA-6458.	2019-04-16 11:36:07 +02:00
Ghostkeeper	60777b72fc	Increase defaults for Maximum Resolution significantly ... We want to limit it mostly to the Maximum Deviation now. So also don't increase the Maximum Deviation along this time. Contributes to issue CURA-6458.	2019-04-16 11:27:29 +02:00
Ghostkeeper	7b62eb9560	Make minimum wall flow also settable per extruder ... It was settable per mesh but not per extruder, but we want it to be settable per extruder as well, causing all meshes printed with that extruder to use that setting value. That's how most of these settings work (like Outer Wall Speed and such). There are some exceptions to this where a setting only makes sense if applied in per-object settings, such as Infill Mesh or support blockers, but this is not such a setting. Fixes #5622.	2019-04-16 09:53:53 +02:00
Ghostkeeper	cea742218b	Revert "Hide travel jerk settings for RepRap flavour" ... This reverts commit d5fa0b395e5185968c70147cf24cb421369fa2f0. It was made based on bad information; travel moves do properly use jerk in RepRap.	2019-04-16 09:42:32 +02:00
Ghostkeeper	d5fa0b395e	Hide travel jerk settings for RepRap flavour ... The firmware doesn't support it there.	2019-04-15 14:09:14 +02:00
Ghostkeeper	932fb75145	Add maximum deviation setting ... This setting allows tweaking the deviation from the norm separately from the length of line segments. Implements CURA-6458.	2019-04-12 18:40:22 +02:00
Diego Prado Gesto	7d644c0d1a	Merge pull request #5594 from stecklars/anycubic-definition-fixes ... Fix comments in anycubic printer definitions	2019-04-10 13:23:26 +02:00
Jaime van Kessel	87c4c03283	Fix incorrect tag in start g-code ... Fixes #5591	2019-04-09 10:47:55 +02:00
Lars-Sören Steck	b47489eb30	Fix anycubic i3 mega gcode comments	2019-04-08 01:16:26 +02:00
Lars-Sören Steck	906074d6ce	Fix anycubic 4max gcode comments	2019-04-08 01:15:49 +02:00
Ghostkeeper	4e2d7a6ea9	Fix combing setting ... This is a Python expression so it needs to be in quotes to become a string.	2019-04-04 16:22:03 +02:00
Jaime van Kessel	932a5c8fc9	Merge branch 'WIP_onboarding' of github.com:Ultimaker/Cura	2019-04-04 14:38:18 +02:00
Lipu Fei	992040d4e6	Merge pull request #5497 from TinkerGnome/Mark2_definition ... add Mark2 definition files	2019-04-04 08:08:46 +02:00
TinkerGnome	ebfd33ba10	remove machine_extruder positions from the definition file	2019-04-03 21:01:36 +02:00
Remco Burema	6242433d8e	Merge pull request #5356 from DesktopMetal/feature_wipe_script ... Feature: "Wipe Script"	2019-04-03 14:42:18 +02:00
Vlad Gribinchuk	6e955f780b	Change description of clean_between_layers to make the relation this setting to retract_at_layer_change more clear for user	2019-04-03 13:45:19 +03:00
Ghostkeeper	ae9395aebb	Merge branch 'master' into WIP_onboarding	2019-04-03 11:53:40 +02:00
Ghostkeeper	168c4e17c6	Reduce support horizontal expansion to 0 ... We have a long-standing issue in CuraEngine that support can be thinner than one line width and is then not generated, but if there is later some extra room it still gets supported in lower layers. This results in unnecessary support. That issue in itself is a bit hairy to fix. But it does point out to another weirdness: PLA support has a horizontal offset of 0.2mm. This was introduced when the Support Horizontal Expansion setting was made as the default, but it was never really investigated. I asked Ultimaker's process engineers and we agreed that the setting could be set to 0 except for PVA. Contributes to issue CURA-6438.	2019-04-02 11:42:26 +02:00
Lipu Fei	0c43b4a180	Merge remote-tracking branch 'origin/master' into WIP_onboarding	2019-04-01 13:33:41 +02:00
Lipu Fei	395dc269b0	Fix hms434 definition file	2019-04-01 13:33:25 +02:00
Lipu Fei	9575c6b3b3	Fix merge conflicts	2019-04-01 13:28:42 +02:00
Ghostkeeper	add6c0b489	Default the gantry height to be equal to the printer height ... You can't fit any objects higher than that anyway. Fixes #5528.	2019-04-01 13:04:38 +02:00
Ghostkeeper	8c41a05183	Merge branch 'maukcc-master'	2019-04-01 11:09:07 +02:00
maukcc	7f2fcb16a8	Adding platform to HMS434	2019-03-29 14:26:42 +01:00
Diego Prado Gesto	0ffcfe041a	Exclude HIPS and PETG for UM3 as it use to be in 4.0	2019-03-29 11:49:06 +01:00
Lipu Fei	e010220432	Fix merge conflicts	2019-03-28 14:46:19 +01:00
maukcc	afb6810bac	Add HMS434 ... Add HMS434 machine	2019-03-27 10:23:59 +01:00
Remco Burema	494c290cc4	Merge pull request #5505 from Ultimaker/CURA-6089_hide_materials ... Exclude gff and cff materials for all ultimaker printers	2019-03-27 09:56:45 +01:00
Diego Prado Gesto	14b409a895	Exclude gff and cff materials for all ultimaker printers except UMS5 ... Contributes to CURA-6089.	2019-03-25 12:59:05 +01:00
Diego Prado Gesto	7958f99152	Update the list of check urls for UM3 Extended	2019-03-25 11:59:28 +01:00
TinkerGnome	5bcb4e9554	add Mark2 definition files	2019-03-23 19:50:23 +01:00
Jaime van Kessel	9a5b7e7925	Set min value for adaptive_layer_height_variation_step ... This is to prevent using 0, since that crashes the engine	2019-03-22 10:44:47 +01:00
Diego Prado Gesto	6611ab7d17	Merge branch 'master' of github.com:Ultimaker/Cura	2019-03-21 16:10:09 +01:00
Diego Prado Gesto	6ad6115327	Modify the firmware checker url to use the new file location	2019-03-21 16:07:26 +01:00
Lipu Fei	11252ce0f7	Merge remote-tracking branch 'origin/WIP_onboarding' into WIP_onboarding_machine_action	2019-03-21 15:00:15 +01:00
Ghostkeeper	20a4d89847	Merge branch 'drzejkopf-patch-5'	2019-03-21 14:43:37 +01:00
Ghostkeeper	07010c7cec	Merge branch 'patch-5' of https://github.com/drzejkopf/Cura into drzejkopf-patch-5	2019-03-21 14:42:09 +01:00
Diego Prado Gesto	0eb295be16	Add the new TPU 1.75mm filament to the list of excluded materials for some printers ... Contributes to CURA-6121.	2019-03-21 14:29:23 +01:00
drzejkopf	f03e5c28d7	Update creality_ender3.def.json	2019-03-20 16:00:40 +01:00
Ghostkeeper	74bfd52c36	Fix default layer height ... The 0.1mm profile doesn't overwrite it. Maybe it should to prevent this mistake in the future? Contributes to issue CURA-6391.	2019-03-20 09:21:42 +01:00
drzejkopf	36a395ee91	Update creality_ender3.def.json ... Changed override of "default_value" to "value" of acceleration_travel and jerk_travel to make slicer keep those values, as they were overrided by conditional in fdmprinter.def.json, and also removed layer height as it does nothing because it's overriden by preffered quality (draft) settings	2019-03-19 22:51:50 +01:00
Lipu Fei	09e317372e	WIP: Remove UMOCheckup MachineAction ... Not used any more.	2019-03-19 15:47:49 +01:00
pinchies	6ebc08420a	Add profile for JGAurora JGMaker Magic (#5430) ... Add a basic profile for JGAurora JGMaker Magic	2019-03-18 16:42:43 +01:00
Jaime van Kessel	02f4cf8c46	Merge pull request #5179 from nbennett1978/master ... integration of printer profiles for ALYA 3DP and ALYA NX 3DP	2019-03-18 16:39:39 +01:00
Nicolas NSSM	df19715e89	Fix Alfawise U30 to get more realistic print times	2019-03-16 14:30:04 +01:00
Ghostkeeper	8e81847fa7	Use periods instead of ellipses ... Because some printers don't accept non-ANSI characters and will stop printing when they encounter one.	2019-03-13 15:43:58 +01:00