Ghostkeeper
9d178f26a7
Increment setting version to 15
...
Once more into the fray.
Contributes to issue CURA-7420.
2020-05-08 09:43:02 +02:00
Kostas Karmas
9bf0255046
Up the setting version to 14 in all the resourses
...
CURA-7421
2020-05-04 13:13:07 +02:00
Ghostkeeper
e2e69f6646
Increment setting version to 13
...
Contributes to issue CURA-7282.
2020-04-01 15:14:01 +02:00
Ghostkeeper
8422172000
Increment setting version to 12
...
This is necessary for the version upgrade to run.
Contributes to issue CURA-7328.
2020-03-30 11:54:18 +02:00
Dimitriovski
94a5b5ef90
CURA-6522_one_at_a_time_overlapping_build_area
...
Changed the setting_version to 11
2019-11-19 15:27:17 +01:00
Lipu Fei
1977a865f1
Fix HMS434 version upgrade
...
CURA-6774
2019-09-24 11:05:52 +02:00
Jaime van Kessel
e56e355e79
Added upgrader for 4.3
2019-07-23 11:15:13 +02:00
Ghostkeeper
a38984dcec
Increment setting_version to 8
...
This is required for the version upgrade.
Contributes to issue CURA-6311.
2019-06-12 09:09:41 +02:00
Lipu Fei
2aa985c6de
Update all profiles to setting_version 7
...
CURA-6113
2019-01-17 11:49:26 +01:00
Ghostkeeper
139ab2e0bb
Increment setting_version to 6
...
Because Cura 4.1 is going to have a version upgrade to change the stack files.
Contributes to issue CURA-5848.
2018-12-27 16:39:05 +01:00
Ghostkeeper
02f7a14765
Fix ordering of a bunch of profiles
2018-12-27 11:29:45 +01:00
jack
06f73ac798
Merge pull request #3920 from Ultimaker/CURA-5450_remove_concentric_3d
...
CURA-5450 remove concentric 3d
2018-06-13 16:55:44 +02:00
Lipu Fei
b81635ac8e
Update setting_version to 5 and add 34 -> 40 upgrade
...
CURA-5450
Also update setting_version for all qualities and variants.
2018-06-12 10:17:35 +02:00
Jack Ha
359506874a
CURA-5342 replace speed setting constants in profiles to formulas; also adds necessary settings for um2p if the setting is also defined in ultimaker2
2018-06-11 13:45:52 +02:00
Ghostkeeper
8438406d8b
Revert "CURA-5342 formulafy speed settings so when changing the main speed, the sub speeds change accordingly"
...
This reverts commit 9432252de472c76ef5b7df954d4cb18aefc9fff7. It was assuming the wrong default speed_print value of 60. It's not always 60. We need to find a different solution or modify the script.
Reverts the fix for issue CURA-5342.
2018-06-08 13:44:40 +02:00
Jack Ha
9432252de4
CURA-5342 formulafy speed settings so when changing the main speed, the sub speeds change accordingly
2018-06-06 17:07:04 +02:00
Lipu Fei
ed390738f4
Update all qualities and variants to version 4
2018-04-05 15:14:15 +02:00
Ghostkeeper
d8a066c1e7
Increment instance container version number instead of just quality_changes
...
Otherwise when we load that quality_changes file we'll deny it because the instance container version number is wrong.
Contributes to issue CURA-5054.
2018-03-09 16:14:24 +01:00
Jack Ha
631b72c007
CURA-4606 in all quality profiles, rename all the specific 1.75mm materials back to the generic material
2018-02-21 14:16:26 +01:00
Lipu Fei
0505b16ffb
WIP: Update quality profiles
...
- Add a new field "variant" in "metadata" section for quality profiles.
"material" will only contain values such as "generic_abs", and
"variant" will contain values such as "0.25 mm", "AA 0.4", etc.
- Reformat "metadata" section to have the following order:
- setting_version
- type
- quality_type
- weight
- global_quality
- material
- variant
2018-02-16 14:20:02 +01:00
Tyler Gibson
c885341e5a
Removing nozzle variants, adding material definitions
2018-01-07 22:39:54 -08:00
