ChrisTerBeke
f48539cc93
Merge pull request #2685 from Ultimaker/container_stack_improvements
...
Container stack improvements
2017-11-17 13:09:54 +01:00
Ghostkeeper
f27494d60a
Move ironing into shell category
...
It is no longer considered experimental.
2017-11-17 10:59:14 +01:00
Ghostkeeper
15a50511b7
Don't crash if support density is 0
...
Found while working on CURA-4523.
2017-11-17 10:57:23 +01:00
Ruben D
8dd91519a6
Move Support Chunk Size out of children of skip_some_zags
...
The rule is that leaf settings are the ones that are used by the engine. The support_skip_some_zags setting is used by the engine.
2017-11-15 00:54:08 +01:00
Ruben D
6d05c320a8
Remove disfunctional initial layer z offset settings
...
The pull request for the engine wasn't merged. It looks like the pull request for the front-end settings wasn't merged either, but here they are. They shouldn't be here.
Fixes #2744 .
2017-11-11 17:51:33 +01:00
ChrisTerBeke
88cf40e2d7
Merge branch 'master' into container_stack_improvements
2017-11-10 14:35:13 +01:00
Lipu Fei
637d1a1da3
Fix Vertex Delta K8800 definition file
2017-11-09 10:37:51 +01:00
Lipu Fei
b0144c7f10
Merge pull request #2740 from kaleidoscopeit/master
...
New machine definition : Deltacomb 3D
2017-11-09 10:33:53 +01:00
Lipu Fei
183c63f765
Merge pull request #2720 from Ultimaker/Update_Infill_Patern_Description
...
Add_tri-hexagon_and_cross_to_pattern_description
2017-11-09 08:14:35 +01:00
Brecht Nuyttens
873862efd7
Fixed Vertex Delta Definition
2017-11-07 16:54:18 +01:00
kaleidoscopeit
5008d63cfe
New machine definition : Deltacomb 3D
2017-11-06 10:01:57 +01:00
ChrisTerBeke
d32b7f0091
Merge branch 'master' into container_stack_improvements
2017-11-06 09:49:44 +01:00
Ruben D
0d71443bd2
Move 'Remove Empty First Layers' setting to mesh fixes category
...
It used to be in 'support' since it's something you may want to decide on depending on whether you have support or not. It could also go in 'Special Modes', but I think this is more specified.
2017-11-05 23:24:07 +01:00
Andreea Scorojitu
1d5d8c5ac0
Add_tri-hexagon_and_cross_to_pattern_description
2017-11-03 15:02:03 +01:00
Diego Prado Gesto
a4441e2bdb
CURA-4481 Setting description improved
2017-11-02 13:20:25 +01:00
ChrisTerBeke
743285f426
Merge branch 'master' into container_stack_improvements
2017-11-01 12:32:37 +01:00
alekseisasin
fb87b73bbe
Merge pull request #2591 from BagelOrb/trihex_infill
...
trihex infill
2017-10-31 17:25:31 +01:00
ChrisTerBeke
4701518404
Add default position to fdm extruder definition - CURA-4482
2017-10-31 10:23:30 +01:00
Chris ter Beke
9806ec7374
Resolve merge conflicts with master - CURA-4482
2017-10-31 09:22:03 +01:00
ChrisTerBeke
d718e6e36c
Create extruder stack for single extruder machines on start - CURA-4482
2017-10-31 09:08:20 +01:00
Ruben D
93e746b1b3
Warm up to layer_0 temperatures in start g-code
...
Thanks to nounours2099 for the correction.
Fixes #2631 .
2017-10-31 00:23:05 +01:00
alekseisasin
e8bd404904
Merge pull request #2584 from Builder3D/master
...
Add Builder Premium
2017-10-27 10:25:11 +02:00
Ghostkeeper
73e809b956
Remove specialised start g-code from Creality CR-10
...
By request from Michael.
This makes it the same as the start g-code for the Custom FDM Printer, which apparently works better.
2017-10-25 13:20:05 +02:00
Diego Prado Gesto
7404df66ac
CURA-4481 Disable "Remove empty layers" when support is enabled.
...
When support is enabled then it doesn't matter if the user choose
whether to remove or not the empty layers, because it's done after
generating supports. In order to avoid confusion to the user, the
setting is disabled.
2017-10-24 16:46:45 +02:00
Jack Ha
a66d27e30e
CURA-4176 reintroduced Wall Extruder. Added limit_to_extruder trick in wall_line_width as suggested in issue to evade inheritance problems.
2017-10-24 15:01:57 +02:00
Jack Ha
d8e1b5b9b4
CURA-4481 add setting Remove Empty First Layers
2017-10-24 11:25:12 +02:00
Jack Ha
4cfd0de580
CURA-4248 hide settings in UI for Surface Energy and Adhesion Tendency
2017-10-23 14:20:10 +02:00
Buco
f1d125b232
Added quality profiles
...
Made some changes to the main profiles and added quality profiles for each material.
2017-10-20 16:09:26 +02:00
ChrisTerBeke
3fcf20c714
Merge pull request #2564 from BagelOrb/slicing_mode
...
Adds a UI setting for the new slicing tolerance option in the engine.
2017-10-20 09:49:05 +02:00
Tim Kuipers
823d11f0e1
rename slicing mode ==> slicing tolerance
2017-10-19 17:14:01 +02:00
Tim Kuipers
4650a12324
slicing mode
2017-10-19 17:14:01 +02:00
Diego Prado Gesto
d3e8915b30
Merge branch 'master' into CURA-4248_BAM
2017-10-19 10:26:25 +02:00
Lipu Fei
475f6223d4
Remove executable bit for json files
2017-10-19 10:24:38 +02:00
ChrisTerBeke
795eda64e3
Merge branch 'master' into CURA-4248_BAM
2017-10-18 15:08:51 +02:00
ChrisTerBeke
78ba3c3aa0
Move BAM equations to BAM quality profiles as they are very specific - CURA-4248
2017-10-18 13:51:06 +02:00
Ghostkeeper
e897431c95
Fix default quality level for Creality CR-10 printers
...
Instead of having a default layer height of 0.2mm, we change the default quality profile to be the one with a layer height of 0.2mm. This fixes up the quality slider.
2017-10-18 13:03:33 +02:00
ChrisTerBeke
4b6f04604c
Set values for support interface density and pattern depending on BAM settings - CURA-4248
2017-10-17 17:21:40 +02:00
ChrisTerBeke
91589ed29d
Add surface energy property to get correct behaviour - CURA-4248
2017-10-17 13:03:29 +02:00
ChrisTerBeke
d426c259d0
Add material adhesion tendency setting, update support top and bottom distance values - CURA-4248
2017-10-17 12:39:26 +02:00
ChrisTerBeke
5f12b5ac6a
set support interface pattern depending on density - CURA-4248
2017-10-16 17:13:29 +02:00
ChrisTerBeke
69d6ca986d
Update FDM printer definition to calculate PSP - CURA-4248
2017-10-16 16:48:49 +02:00
ChrisTerBeke
a444e5c883
update material xml parser to support psp values - CURA-4253
2017-10-16 15:55:46 +02:00
Buco
95f018530f
Add Builder Premium
...
Tabs became spaces
2017-10-16 13:21:46 +02:00
Ghostkeeper
497327ba73
Merge branch '3.0'
2017-10-12 09:29:09 +02:00
Ghostkeeper
f94954e9ca
Improved end g-code
...
This one removes the hair at the end of this print a bit better.
Contributes to issue EM-1859.
2017-10-12 09:28:50 +02:00
Tim Kuipers
2c73b017a4
trihex infill
2017-10-12 09:26:45 +02:00
Buco
6dc3b29047
Add Builder Premium
...
Add definitions for the Builder Premium Small, Medium and Large printers.
2017-10-11 11:51:39 +02:00
Ghostkeeper
bc419370d0
Merge branch '3.0'
2017-10-06 16:02:13 +02:00
Ghostkeeper
b9045f6b24
Give warning if using some patterns with gradual
...
Cross, Cross 3D, Concentric and Concentric 3D don't work well with Gradual Infill. Lines and zigzag don't work well with Gradual Support Infill (in addition to the previously mentioned patterns) since they aren't alternating in support.
Contributes to issue CURA-4095.
2017-10-06 16:01:53 +02:00
ChrisTerBeke
35dae000a0
Merge branch '3.0'
2017-10-06 10:45:42 +02:00
