149 Commits

Author	SHA1	Message	Date
Jaime van Kessel	1d91827664	NetworkPrinter now uses printerState to store global state ... CURA-2235	2016-09-12 13:31:07 +02:00
Jaime van Kessel	f914ef5424	We now save the auth data right away in order to prevent mismatches ... CURA-2279	2016-09-12 11:59:25 +02:00
Jaime van Kessel	feae612d55	Look at the correct stack for variant ... CURA-2313	2016-09-12 10:54:57 +02:00
Jaime van Kessel	820d91486f	Printer setting mismatches are now also logged as warnings ... CURA-2313	2016-09-12 10:44:56 +02:00
Jaime van Kessel	ae161748ef	Material type is now only checked if we actually use that extruder ... CURA-2313	2016-09-12 10:39:58 +02:00
Jaime van Kessel	f294d580a9	Zipping the data no longer causes GUI to freeze ... CURA-2286	2016-09-09 16:46:04 +02:00
Jaime van Kessel	7f0194cce0	We now compress the g-code layer by layer so the GIL won't always lock fully ... CURA-2286	2016-09-09 15:44:02 +02:00
Jaime van Kessel	3747db0f4d	Added logging to see how long compression took ... CURA-2286	2016-09-09 15:28:37 +02:00
Jaime van Kessel	9de064fdba	Fixed issue where large files could no longer be sent ... CURA-2286	2016-09-09 15:20:08 +02:00
Jaime van Kessel	97cf79c2e1	If serialization of XML fails, we don't try to send it to the printer	2016-09-09 11:16:49 +02:00
Jaime van Kessel	a6a47b0aa2	Uploading g-codes is now done g-zipped ... CURA-2286	2016-09-09 11:16:40 +02:00
Jaime van Kessel	f5886e5ecc	Counter is now only reset if no previous state was set	2016-09-09 11:16:31 +02:00
Jaime van Kessel	f75b4739f6	Added logging when the post was aborted due to connection loss ... CURA-2295	2016-09-09 11:16:23 +02:00
Jaime van Kessel	5e54e8570d	Merge branch '2.3' of github.com:Ultimaker/JediWifiPrintingPlugin into 2.3	2016-09-08 16:37:46 +02:00
Jaime van Kessel	28bfc36472	Recreate network manager count is now always increased once	2016-09-08 16:37:10 +02:00
fieldOfView	9bd4d3c0a8	Update configuration mismatch dialog layout and wording ... Also return to settings tab when not continuing with the print CURA-2285	2016-09-08 11:26:01 +02:00
Jaime van Kessel	65a2cedf9c	Cleaned up code duplication in warning system ... CURA-2285	2016-09-07 15:05:07 +02:00
Jaime van Kessel	1f3c8e0939	If saved authentication is wrong, it's now correctly reset ... CURA-2295	2016-09-07 14:25:24 +02:00
Jaime van Kessel	97892273fc	Updated logging	2016-09-07 14:04:23 +02:00
Jaime van Kessel	357f1186da	Added logging to start of uploading ... CURA-2295	2016-09-07 13:05:11 +02:00
Jaime van Kessel	d0823fda11	If a timeout lasted to long without update, we only re-create network interface once ... CURA-2295	2016-09-07 12:58:48 +02:00
Jaime van Kessel	93cc25b408	Added exception handling for when wrapped reply object is already deleted ... CURA-2295	2016-09-07 11:56:19 +02:00
Jaime van Kessel	f2e93bfd97	Added time spent in timeout to re-check connection log ... CURA-2295	2016-09-07 11:46:55 +02:00
Jaime van Kessel	b5d0b32bce	Variant is now matched by name instead of ID ... CURA-2285	2016-09-07 09:48:18 +02:00
Jaime van Kessel	d76927ef5d	Added warning messages for mismatch / not enough material ... CURA-2285	2016-09-07 09:18:52 +02:00
Jaime van Kessel	ef667c7ec7	If there is no material or correct cartridges inserted into printer, the job is refused ... CURA-2285	2016-09-06 14:44:53 +02:00
fieldOfView	6770db9c51	Update wording when unable to start a new printjob ... UM3IC-193	2016-09-05 13:45:57 +02:00
fieldOfView	fa8eba7873	Update wording	2016-09-01 15:14:53 +02:00
Jaime van Kessel	3a48fc23d1	Added logging for the time it took to upload a print	2016-08-23 13:56:50 +02:00
Jaime van Kessel	0c931424f9	Re-create the network manager every 30 seconds of not being connected ... CURA-1851	2016-08-22 14:08:01 +02:00
Jaime van Kessel	5825793f28	QNetworkManager is now re-created every time we try to connect ... CURA-1851	2016-08-22 09:49:57 +02:00
Jaime van Kessel	0a08707922	Added logging about network accessible state ... CURA-1851	2016-08-19 15:30:34 +02:00
Jaime van Kessel	42bbf2b4c8	ALso abort if the network is not accesible ... CURA-1851	2016-08-19 15:26:37 +02:00
Jaime van Kessel	1d6732273c	Added local network connectivity detection ... CURA-1851	2016-08-19 13:32:17 +02:00
Jaime van Kessel	5c2ac558ea	Increased timeout time to 10 seconds ... CURA-1851	2016-08-19 13:14:10 +02:00
Jaime van Kessel	edabe9d593	Improved logging a bit more ... CURA-1851	2016-08-19 13:13:22 +02:00
Jaime van Kessel	99892ffd58	Added exception handling for disconnect issues on mac ... CURA-1851	2016-08-18 13:28:04 +02:00
Jaime van Kessel	1dbd789d10	Only log messages without status when we are not in error mode. ... This prevents spamming the logs with messages	2016-08-17 13:09:04 +02:00
Jaime van Kessel	f60871e068	Both timeout cases now abort the upload ... CURA-1851	2016-08-17 13:07:20 +02:00
Jaime van Kessel	26eaedaa2c	Improved verbosity of logging	2016-08-17 13:00:07 +02:00
Jaime van Kessel	d405afb9f2	Added bit more logging	2016-08-17 12:40:35 +02:00
Jaime van Kessel	8cc9e8cf72	Post requests are now aborted when connection is timed out ... CURA-1851	2016-08-17 12:38:51 +02:00
fieldOfView	58115ce798	Fixed one more occurrence of "hotend" to "PrintCore" ... CURA-2116	2016-08-17 11:07:39 +02:00
fieldOfView	631d079e26	Show only one "Successfully paired" message at once.	2016-08-16 17:57:07 +02:00
fieldOfView	4f04acf8c5	Merge branch 'master' of https://github.com/Ultimaker/JediWifiPrintingPlugin	2016-08-16 16:46:52 +02:00
fieldOfView	dd649580f5	Move the "Changes on Printer" dialog to JediWifiPrinting ... ...to have full control over the terminology CURA-2116	2016-08-16 16:46:35 +02:00
Jack Ha	c362c2e0b9	Correct spelling	2016-08-15 11:04:26 +02:00
fieldOfView	d7c6f85bcd	Add i18n to tooltip and tweak pair request failed message ... CURA-2086	2016-08-11 15:53:45 +02:00
Jaime van Kessel	842d4b9ad8	Added retry action to auth failed message ... CURA-2086	2016-08-11 15:34:37 +02:00
Jack Ha	da9cbe9b40	Merge branch 'master' of github.com:Ultimaker/JediWifiPrintingPlugin	2016-08-10 17:36:46 +02:00