- Remove "author" from "metadata" section
- Add "hardware_type" for variants that don't have it
- Reformat "metadata" section to have the following order:
- setting_version
- type
- hardware_type
CURA-4451
- Add upgrade script for 3.0. to 3.1
- Upgrade old stack files so they will use "empty_quality" as the
"Not Supported" quality profile.
- Increase SettingVersion to 4
We haven't tested this (neither did we test 0.3mm what it was originally) but we estimate that this will work a bit better. At least it won't give a warning.
CURA-4145
When features with limit to extruder set to "not overriden" and its
value is retrieved with "extruderValue()", because the extruder number
is "-1", extruderValue() falls back to the global stack. As a result,
values can be incorrect. This workaround using the variants temporarily
solves the problem for outer and inner wall line widths.
CURA-3872
We add a new setting "machine_nozzle_type" to give the engine
information about the nozzle type, such as "AA" and "BB". This is
applicable to UM3 and UM3XL.
The UM3 definition sets the setting to 3mm. Nothing else sets it to another value except FDM Printer. I left the UM3 setting in and removed all travel_avoid_distance settings in the UM3 profiles.
These updates bring different speeds for support-top vs. support-bottom, and changes the bottom pattern now that they are separately configurable. I also sorted the BB0.8 variant alphabetically (raft settings were out of place).
This was found by the materials team to be a better value. All UM3 profiles have 20 now. I've left the third-party machines intact which override the prime tower size but those that didn't override the prime tower size have their prime tower size altered as well.
This adds a set of variants that just set the nozzle diameter and nozzle tip diameter. These variants are not used until the machine action sets the has_variants metadata entry.
Some of them ended up as 15 because that's the default in the Ultimaker 3. This was done correctly by the profile optimiser because this setting was not specified by the original profiles, but it should've been 20 for all AA 0.8mm profiles.
Contributes to issue CURA-3650.
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason.
Contributes to issue CURA-3650.
