4546 Commits

Author SHA1 Message Date
Paul Kuiper
22b67f1c20 Increase small skin width from 0.8mm to 4mm to prevent jerky moves in small skin areas. Increase wipe distance to 0.8mm to improve seam quality.
PP-423
2024-01-18 15:53:11 +01:00
Erwan MATHIEU
612de4c248
Merge pull request #18028 from Ultimaker/PP-414-Reduce-raft-extention-add-border
PP-414 Improve raft boundary
2024-01-17 16:09:54 +01:00
Casper Lamboo
c136e3066d
Merge pull request #17881 from Ultimaker/PP-377-Improve-time-estimate-Method
PP-377 Improve the time estimates for the Method machines
2024-01-16 16:46:03 +01:00
Paul Kuiper
783f51aef2 Let the wall count of the middle and top raft interface follow the raft wall count
PP-414
2024-01-15 11:48:23 +01:00
Remco Burema
c64dcb785c Remove 'support_interface_skip_height' setting.
Was used for run-time efficiency, but it wasn't really ever set beyond one layer-height, which made it rather useless.

frontend part of CURA-11157 -- needed version upgrader as well, since it's the first alteration
2024-01-10 08:55:56 +01:00
Erwan MATHIEU
30b25975df Make settings not settable par extruder
CURA-11395
2024-01-09 16:38:57 +01:00
c.lamboo
1f7b8efff0 Don't make raft_smoothing settable per extruder
CURA-11395
2024-01-09 16:26:14 +01:00
casperlamboo
d9feb88b24 Applied printer-linter format 2024-01-09 09:22:53 +00:00
c.lamboo
594e4a5ea6 Warn if raft extra margin exceeds raft margin of layer below 2024-01-09 10:20:42 +01:00
c.lamboo
af51ccf5f3 Move "Remove Raft Inside Corners" outside experimental 2024-01-09 10:17:10 +01:00
c.lamboo
37f350b134 Limit settings to their correct extruders 2024-01-09 10:15:17 +01:00
Erwan MATHIEU
aaa25104df
Merge branch 'main' into CURA-11395 2024-01-08 17:34:45 +01:00
Erwan MATHIEU
90ce6d7f76 Reorganize raft settings to a user-intuitive order
CURA-11228
2024-01-08 16:53:10 +01:00
casperlamboo
ff45f566d6 Applied printer-linter format 2024-01-08 13:46:14 +00:00
c.lamboo
a7137c5e63 Add raft settings to make margin and remove inside corners configurable per raft-type
Added teh following settings
- raft_base_margin
- raft_interface_margin
- raft_surface_margin
- raft_base_smoothing
- raft_interface_smoothing
- raft_surface_smoothing
- raft_base_remove_inside_corners
- raft_interface_remove_inside_corners
- raft_surface_remove_inside_corners
2024-01-08 14:44:17 +01:00
Erwan MATHIEU
13deab505e Add/reorganize settings for raft walls
CURA-11228
2024-01-08 11:32:25 +01:00
c.lamboo
da4f675008 Optimize wall printing order
CURA-11507
2024-01-06 16:39:04 +01:00
Jelle Spijker
7d040a0b02
Fixed multiple default_value definitions
default_value should be an actual value
2024-01-03 18:03:37 +01:00
jellespijker
4a8e00fcc6 Applied printer-linter format 2024-01-03 16:38:51 +00:00
Jelle Spijker
2e197f72ee
Add missing default_value for `roofing_monotonic 2024-01-03 17:37:54 +01:00
Paul Kuiper
44441dfe5b Improve the time estimates for the Method machines be increasing the acceleration and reducing the jerk. For dual extrusion a rough switch over time estimate is taken into account.
PP-377
2024-01-03 15:54:24 +01:00
Saumya Jain
afcf3e1e09
Merge branch 'main' into PP-408-improve-raft-quality 2023-12-15 16:13:45 +01:00
saumya.jain
cc4627886b Name shortned for Cura settings
CURA-11392
2023-12-12 13:01:37 +01:00
Jelle Spijker
ba0fb97d63
Include threshold settings
Contributes to CURA-11391
2023-12-12 10:01:59 +01:00
Paul Kuiper
df6239be89 Fix a bug in which Cura sets fanspeed in the 0..255 range instead of the 0..1 range for Method machines.
CURA-11441
2023-12-08 10:52:00 +01:00
Paul Kuiper
a9c3c2b4b4 Increased raft base layer speed from 5mm/s to 10mm/s and increased raft middle layer linewidth from 0.4 to 0.7mm to increase productivity.
PP-408
2023-12-05 15:25:52 +01:00
Paul Kuiper
66ad006bc5 Reduced line width of the middle raft layer from 1.2 to 0.4
Increase speed from 27.5mm/s to 90mm/s.
2023-11-30 14:15:00 +01:00
Jelle Spijker
319d478a9a
Merge pull request #17422 from Ultimaker/remove-luts
Clean up bot LUT
2023-11-29 15:09:09 +01:00
nallath
8b0e914abb Applied printer-linter format 2023-11-29 12:49:59 +00:00
Jaime van Kessel
3165b54624
Fix typo 2023-11-29 13:49:02 +01:00
Jaime van Kessel
6d6989c95c
Merge branch 'PP-363_Fix_broken_definitions' of github.com:Ultimaker/Cura 2023-11-29 13:47:07 +01:00
Jaime van Kessel
dff3f1a406
Remove redundant overrides
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2023-11-29 13:46:32 +01:00
Casper Lamboo
280b002799
Merge branch 'main' into master 2023-11-29 13:45:52 +01:00
Jaime van Kessel
d6c16b8ac7
Merge branch 'main' of github.com:Ultimaker/Cura into PP-363_Fix_broken_definitions 2023-11-29 13:45:36 +01:00
Jaime van Kessel
7dcbaadb62
Merge branch 'creality-ender-3-V3-SE-print-head' of github.com:mcuprojects/Cura 2023-11-29 13:25:49 +01:00
Jaime van Kessel
4d38ca9852
Merge branch 'main' of github.com:Asterchades/Cura 2023-11-29 13:11:39 +01:00
Jaime van Kessel
d25b0d941b
Merge branch 'main' of github.com:goofoo3d/Cura 2023-11-29 13:05:29 +01:00
nallath
1a9e82da86 Applied printer-linter format 2023-11-29 12:04:33 +00:00
Jaime van Kessel
18c1dbb79d
Merge branch 'main' of github.com:Barrnet/Cura 2023-11-29 13:00:28 +01:00
Casper Lamboo
c1bd5e2356
Merge branch 'main' into remove-luts 2023-11-29 12:30:15 +01:00
casperlamboo
7e0d633106 Applied printer-linter format 2023-11-29 11:26:50 +00:00
c.lamboo
cf27163934 Update bot to reference 2023-11-29 12:25:51 +01:00
c.lamboo
a9dcfaa032 specify bot id type 2023-11-27 15:32:55 +01:00
Jaime van Kessel
344d648445
Merge branch '5.6' of github.com:Ultimaker/Cura 2023-11-27 12:40:56 +01:00
Casper Lamboo
dfbc27b2c5
Merge pull request #17388 from Ultimaker/PP-402-no-support-in-raft-when-self-support-is-used
No support material in raft when self support is used
2023-11-24 21:40:49 +01:00
Remco Burema
9698210083 Fix more printer-linter warnings.
done as part of CURA-11379
2023-11-24 17:03:20 +01:00
Remco Burema
e7de8597c1 Fix printer-linter warnings.
done as part of CURA-11379
2023-11-24 16:56:26 +01:00
casperlamboo
ae047d2f8c Applied printer-linter format 2023-11-24 15:50:31 +00:00
c.lamboo
495079f3d9 Clean up bot LUT
We had a lot of Look up Tables scattered around in the cura repository. This can be solved by adding a `bot_id` entry to metadata of the various makerbot extruders/materials/definitions
2023-11-24 16:49:31 +01:00
Remco Burema
2d04650c61 Fixed prime-tower for machines with explicit disallowed areas.
These machines have disallowed areas (either 'machine_disallowed_areas' or 'nozzle_dissalowed_areas'), which can't at the moment be calculated with formula's (not without adding a feature at least, but we're currently in feature-freeze).

part of CURA-11379
2023-11-24 16:41:44 +01:00