* Update in Definition file for Hellbot Magna 1
* Change the Author name and version number.
* Added Heated bed.
* Added specific Gcode for purging the 2 in 1 hotend.
* Add bed images for Hellbot Hidra and Hidra Plus
* Add meshes files for Hellbot Hidra and Hidra plus
* Add extruder files for new Hellbot printers
* Add extruder files for new Hellbot Printers: Hellbot Hidra and Hellbot Hidra Plus
* Add New Hellbot printers
* Add definition files for the new Hellbot printers: Hidra and Hidra Plus
CURA-8047
After changing this with fvrmr together I read back on the commit and realised that the sentence was literally saying that it affects adhesion, and then that it doesn't affect adhesion. I hope this clarifies that a bit better by giving examples.
* Add files via upload
* Add files via upload
* Add files via upload
* Update fusedform_300_draft_abs.inst.cfg
* Add files via upload
* Delete fusedform_300_draft_abs.inst.cfg
* Delete fusedform_300_draft_pla.inst.cfg
* Deletion of old files
* changes in STD quality profiles
* Changes in mini quality files
* Changes in FF600 quality files
* changes in machine definition name
* Changes in definition files
* extruder and definition linking
* ff300 inherits and extruder def
* Update fusedform_300.def.json
* category deprecation in definitions
* inherits
* ff300 extruder definition machine
* extruder machine definitions
* Fused form FF600plus machine profiles
* PETG profiles
* Update fusedform_300.def.json
* changes in start gcode
* machine configuration dynamics on definitions
* speed adjustments
* dynamics modification in petg and flex quality
* Further adjustments on dynamics definitiosn
* Modification of all files under inherits data structure.
* Quality setting version 15 to 16
* These changes are for limiting quality types in the materials defined
* Quality Modification under Global and Material specific structure
Global quality structures and material specific definitions under the global structures
* Addition of double extruder machine definitions
* Machine definitions update according to structure
* Doppia Base definitions erased, Doppia definitions updated to use a single base definition.
* extruder 1 base definition fix
* extruder train overrides
* extruder modifications
* Update fusedform_300_doppia.def.json
* Base settings and extruder definitions
* retraction modification to avoid filament damage
* REdefinition test of second extruder train in doppia
* Update fusedform_300_doppia.def.json
* Update fusedform_base_extruder_1.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_base_extruder_1.def.json
* Update fusedform_300_doppia.def.json
* Update fusedform_600_doppia.def.json
* Update fusedform_600_doppia.def.json
* Additional updates in Doppia definitions
* Creation of Doppia base definition, doppia extruders. Update in doppia machine definitions
* correction in quality definitions to pull base definitions from a single base
* more corrections
* small parameter update
Small changes in printing parameters to optimize retraction and other settings.
The draft and ooze shield use the skirt/brim settings to print. So these settings should be adjustable if the draft or ooze shield is enabled. It's a bit weird UX-wise, but it's correct. The UX problem will be tackled later.
Apparently this was already done for the speed/acceleration/jerk settings so no change necessary there.
Contributes to issue #8808.
Two problems with this description:
- It claims that meshes with lower rank override meshes with higher rank. It's the other way around.
- It mentions 'rank' in one sentence and then 'order' in the next. I've corrected this to use the term 'rank' in both sentences for clarity. This is also the term used for the setting label, to be consistent.
Found in issue #8821.
