GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-05-19 05:47:29 +08:00
Code Issues Packages Projects Releases Wiki Activity
12,244 Commits 290 Branches 260 Tags
Commit Graph

506 Commits

Author SHA1 Message Date
fieldOfView
25eb1ff342 Fix the detection of multiextruder replacement patterns 
Since #3068, replacement patterns can take the form of {setting_nr, extruder_nr}. This form was not being recognised when determining if CuraEngine should prepend its own preheat sequence.
 2018-02-03 22:09:40 +01:00
Jack Ha
8d8fa0269a CURA-4821 loading gcode will now delete all existing models from all build plates and delete existing layer data to be processed 2018-01-22 12:57:50 +01:00
Jack Ha
ba29d64592 CURA-4821 Fix one at a time slicing for builtiplexer 2018-01-22 11:07:38 +01:00
Diego Prado Gesto
f25aad8091 CURA-4821 Remove debug output 2018-01-19 11:18:46 +01:00
Diego Prado Gesto
1f4e7421c1 Revert "CURA-4821 Remove debug info" 
This reverts commit d03ecf3cba84d1551d6cb979ef0fb094da92a3e2.
 2018-01-19 11:17:42 +01:00
Diego Prado Gesto
d03ecf3cba CURA-4821 Remove debug info 2018-01-19 09:16:22 +01:00
Diego Prado Gesto
ece63bfea8 CURA-4821 The previous cached layer data is removed when a GCode is loaded. Temporary solution for one buildplate. 2018-01-18 15:47:01 +01:00
Jack Ha
a0738c2977 CURA-4808 fix extruder setting change trigger slice. re-introduce extrudersAdded signal, probably needed because of timing issues (extruder added after loading global container). it's the inversion of 225b03e98ee1d92467176a1fd1ef3605ce0999c7 2018-01-16 11:49:45 +01:00
Lipu Fei
b54b075cc9 Use isinstance() instead or issubclass() 
CURA-4525
 2018-01-12 16:42:34 +01:00
Lipu Fei
225b03e98e No need for the extra extrudersAdded signal 
CURA-4784
 2018-01-12 09:58:07 +01:00
Lipu Fei
8b3bd71b36 Get extruders list from GlobalStack itself 
CURA-4784
 2018-01-12 09:57:34 +01:00
Aleksei S
3f4a2c565c Fix: after extruders switch do not trigger slicing, provided a new signal 
which is triggered after adding extruder and it subscribers for property changes
 2018-01-11 13:32:05 +01:00
Jack Ha
d91a2e1ca3 CURA-4525 move reset print information to a better place to prevent it sending info of non existent build plates 2018-01-10 16:04:56 +01:00
Jack Ha
6262003069 CURA-4525 reset the print information for build plates that are marked for slicing 2018-01-10 16:01:26 +01:00
Jack Ha
0fdb470ec7 CURA-4525 only try to slice next build plate if there are actually build plates to slice 2018-01-10 14:39:26 +01:00
Jack Ha
686ac2292d CURA-4525 CURA-4772 fix gcode not overlapping thoughout build plates 2018-01-10 14:13:18 +01:00
Jack Ha
80aaad83e1 CURA-4525 fix manual slice slicing more than one build plate at a time 2018-01-10 14:12:21 +01:00
Lipu Fei
c8cef9583e rename scene.gcode_list to gcode_dict 
CURA-4741

With the multi build plate feature, scene.gcode_list is now a dict which
stores a list of gcode for a build plate, so it makes more sense to have
it renamed to "gcode_dict" because it's not a list.
 2018-01-08 16:18:41 +01:00
Jack Ha
c1cb86a334 CURA-4525 remove initial 'Unable to slice' 2018-01-08 14:00:06 +01:00
Jack Ha
86eb9c73ba CURA-4525 do not send empty build plates gcode; direct calling slice when skipping empty build plate 2018-01-08 13:41:58 +01:00
Jack Ha
52b75b58e7 CURA-4525 allow for empty build plates between filled build plates 2018-01-08 13:25:39 +01:00
Aleksei S
784a17149f Don't show save to file if not possible to slice 
CURA-4525
 2018-01-05 15:20:42 +01:00
Aleksei S
5dad6cab2c If the model is:some per mesh settings or outside of the buildplate show message, 
CURA-4525
 2018-01-05 14:00:23 +01:00
Ghostkeeper
a8ad956c92
Erase gcode of build plates that are determined to be empty 
You don't want to start a new slice, but you should still erase the g-code there.

Contributes to issue CURA-4525.
 2018-01-05 13:34:39 +01:00
Ghostkeeper
fefb20deb7
Don't start slicing again if you can't slice 
Contributes to issue CURA-4766.
 2018-01-05 13:33:40 +01:00
Jack Ha
8854a28d56 CURA-4525 solved merge conflict 2018-01-04 10:24:30 +01:00
ChrisTerBeke
46827b9295 Fix tevo blackwidow json file 2018-01-04 10:14:55 +01:00
Jack Ha
62487e8ea2 CURA-4525 cleanups and change comment and added new-lines 2018-01-03 15:41:08 +01:00
Jack Ha
bfa33c721c CURA-4525 solved merge conflicts 2018-01-03 13:52:55 +01:00
fieldOfView
308d220bf3 Add an "initial_extruder_nr" pattern 2017-12-31 12:30:00 +01:00
fieldOfView
7a0b49ca2f Allow specifying the extruder stack to use for each replacement pattern 
The replacement pattern is (optionally) extended with an extruder_nr: {setting_key,extruder_nr}. The extruder_nr can either be a number (-1 for the global stack, 0 or higher for an extruder), or a setting keyword such as support_extruder_nr etc.

Contributes to #1296
 2017-12-31 11:29:37 +01:00
Ghostkeeper
719bd5a707
Fix slicing non-printable meshes that fall outside of build volume 
Non-printable meshes don't care whether they are in the build volume or not.

Contributes to issue CURA-4734.
 2017-12-29 18:08:58 +01:00
Aleksei S
d0a3575c0c Don't print the model if it is outside of the buildplate 
CURA-4734
 2017-12-22 14:48:45 +01:00
Jack Ha
c05e6b43ff Fixed platform physics. CURA-4525 2017-12-21 13:11:32 +01:00
Jack Ha
a47107448e Moved objects menu to lower left and made it collapsible. CURA-4525 2017-12-21 11:39:37 +01:00
Jack Ha
5152b2ae65 Solved merge conflicts. CURA-4525 2017-12-21 10:52:51 +01:00
Lipu Fei
61dd1c98fd Fix cases with no per-object settings stack 
CURA-4705
 2017-12-20 13:16:29 +01:00
Lipu Fei
b2ac2e0fc7 Trust the stack values more than the decorator 
CURA-4705

A SceneNode and its decorators can be deepcopied. However, the data in
some decorators will only be updated when a per-object settings stack
triggers a property changed event. That event cannot copied. So, it can
happen that a deepcopied SceneNode has inconsistent data in some of its
decorators than what's in the per-object settings stack.
 2017-12-20 12:26:50 +01:00
ChrisTerBeke
57651e837f Fix setting the right extruder temperatures in start and end gcode 2017-12-15 14:17:18 +01:00
Aleksei S
88af41769e Check multiple models with non_printing settings 
CURA-4703
 2017-12-13 16:04:01 +01:00
Aleksei S
c6c4c5be34 Merge branch 'master' of github.com:Ultimaker/cura 2017-12-13 12:03:06 +01:00
Aleksei S
5c5f08e9ca Do not slice a model if it is only one on a build plane and has setting from non_printing_mesh 
CURA-4703
 2017-12-13 11:58:59 +01:00
Jack Ha
e10ba065ca CURA-4707 better signal to connect solving this issue 2017-12-12 17:06:23 +01:00
Jack Ha
a85bea4bae CURA-4707 fix extruder setting not triggering reslice 2017-12-12 16:37:21 +01:00
Diego Prado Gesto
c3d9c1b3d8 CURA-4667 Fix simulation view render race. Change the place where the 
layer data is reset.
 2017-12-04 09:49:03 +01:00
Mark Burton
033a4615eb Call resetLayerData() before adding LayerDataDecorator to scene node rather than afterwards. 
This ensures that the layer data is reset before the scene is rendered.
 2017-12-01 17:47:08 +00:00
fieldOfView
4b0ff6e5f4 Prevent start & end gcode snippets being double encoded 2017-11-30 15:16:09 +01:00
Lipu Fei
4586e3dd55
Merge pull request #2375 from Ghostkeeper/optimise_sending_slice_job 
Optimise sending slice job
 2017-11-29 14:13:37 +01:00
ChrisTerBeke
0668f80792
Merge pull request #2758 from fieldOfView/feature_mesh_types 
Improved mesh type UX (Per Model Settings)
 2017-11-29 13:24:38 +01:00
Diego Prado Gesto
2c6b2b869e CURA-4605 Fix render issues when there are empty layers. 
Fix layer gap when raft is enabled.
 2017-11-23 15:39:22 +01:00