It is actually being set per extruder right now, since this is where the definition gets its extruder number from. If the setting is not settable per extruder, the ExtruderStack skips the setting entirely and defers to the global stack, which doesn't have the setting and so None is returned. This was giving errors.
Contributes to issue CURA-3772.
All of the profiles currently in Cura that set the gradual infill steps also set the step height (to 3 to 5 layer heights). I'd have chosen 4 layer heights as default based on that, but our material experts say that 1.5mm is about right for most models.
Contributes to issue CURA-3732.
CURA-3740
These settings inherently have to do with multiple features and
so we should find a value function which depends on
settings from the extruder trains corresponding to those features (wall, skin, infill).
However, we haven't found those functions yet and we have to do research.
Once we have found the formula these settings shouldn't depend on a single extruder any more
and so we should remove the limit_to_extruder.
CURA-3740
These settings inherently have to do with multiple features and
so we should find a value function which depends on
settings from the extruder trains corresponding to those features (wall, skin, infill).
However, we haven't found those functions yet and we have to do research.
Once we have found the formula these settings shouldn't depend on a single extruder any more
and so we should remove the limit_to_extruder.
Smoothing the contours minimises the visibility of the z-seam and for most models is
probably a good idea. Where it is less good is when the model has a fine surface details
which will get mangled by the smoothing. So we should let the user decide whether they
want to smooth or not. The default is true as most of the time it's a good thing.
# Conflicts:
# resources/definitions/fdmprinter.def.json
The registry checks if they are in sync and complains if they aren't. The extruder count is set back to default to 1 upon adding the machine.
Contributes to issue CURA-3497.
This adds a set of variants that just set the nozzle diameter and nozzle tip diameter. These variants are not used until the machine action sets the has_variants metadata entry.
