Lipu Fei
2e4ffc83b5
Add material_diameter to fdmextruder definition
...
CURA-4708
2018-01-02 10:50:06 +01:00
Torbjørn
391adbdfb3
Remove ID from definition files
2017-12-30 02:24:23 +01:00
Ghostkeeper
bf2972200d
Clarify infill/skin overlap setting descriptions a bit
...
Discovered during work on CURA-4732.
2017-12-28 18:09:44 +01:00
Ghostkeeper
76d0a336f0
Merge branch 'master' of https://github.com/innovo3d/Cura
2017-12-18 11:24:22 +01:00
Ghostkeeper
1029d4509c
Merge branch 'master' into feature_local_container_server
2017-12-08 16:03:05 +01:00
Adam Rumjahn
d2e2f13bd7
Merge branch 'master' into master
2017-12-05 21:26:23 -05:00
Adam Rumjahn
f690961900
Deactivated G32 autoleveling
...
Update form last commit, complied with new syntax
2017-12-05 21:20:43 -05:00
Ghostkeeper
b453e0a4e7
Allow minimum layer time to be higher than the fan speed min/max threshold
...
Previously that wasn't possible because the division that calculated the slope of the fan speed ramping up towards the minimum layer time couldn't deal with negative values. Now it deals with that properly and in the limit the regular fan speed will be used.
Fixes #2328 and CURA-4272.
2017-12-04 11:27:37 +01:00
Ghostkeeper
dad99f5292
Merge branch 'master' into feature_local_container_server
...
Contributes to issue CURA-4243.
2017-11-29 13:06:08 +01:00
alekseisasin
d4dfca3ef5
Merge pull request #2868 from Ultimaker/feature_adaptive_layer_heights
...
Add experimental settings for adaptive layer heights - CURA-4524
2017-11-29 09:48:33 +01:00
ChrisTerBeke
e6b3773d8e
Merge pull request #2797 from Ultimaker/feature_firmware_retract_setting
...
Add setting to determine whether to use firmware retraction
2017-11-28 13:45:38 +01:00
ChrisTerBeke
cf187215dd
Add experimental settings for adaptive layer heights - CURA-4524
2017-11-28 11:44:20 +01:00
Ruben D
ab64cb5749
Add print head shape
...
Fixes #2808 .
2017-11-27 23:10:58 +01:00
Ghostkeeper
65ea8a614c
Don't make filter_out_tiny_gaps a child setting of fill_perimeter_gaps
...
Parent settings are not used by the engine. Or they shouldn't be, because the parent settings are disabled by the front-end when all of their child settings are overwritten. Then you'd have a parent setting that is used by the engine but you can't modify it. Also, the command-line slicing doesn't load parent settings since it can't parse categories and such.
2017-11-27 13:54:29 +01:00
Ghostkeeper
a0ae7489f8
Less technical term for X/Y offset of infill
...
Just in the description. It's good to describe a setting using different words than the setting name.
Contributes to issue CURA-4601.
2017-11-24 13:16:14 +01:00
Ghostkeeper
9ecfd5510a
Clarify description for when bed temperature is 0
...
Fixes #2674 .
2017-11-24 10:42:09 +01:00
Adam Rumjahn
43c9df5703
Deactivate G32 auto leveling before print
...
don't need this any more on the new printers
2017-11-23 20:14:43 -05:00
Lipu Fei
6b132a13de
Merge pull request #2786 from 0r31/discoeasy200_profile
...
Improve discoeasy200 profile
2017-11-23 00:25:07 +01:00
Jack Ha
0a2a9a2589
CURA-4533 added setting 'Filter out tiny gaps'
2017-11-22 09:42:03 +01:00
Lipu Fei
b439581e2d
Merge pull request #2816 from Ultimaker/CURA-4104
...
CURA-4104 added settings for flow rate compensated extrusion
2017-11-20 15:27:56 +01:00
Aleksei S
9337cc8a7f
Merge branch '3.1' into print_simulation_view
2017-11-20 14:32:22 +01:00
Mark
c1733dd908
Update fdmprinter.def.json
2017-11-20 14:19:58 +01:00
Jack Ha
12bee471eb
CURA-4104 added settings for flow rate compensated extrusion
2017-11-20 14:06:03 +01:00
Ghostkeeper
a5a15df08d
Add setting to set the maximum mesh resolution
...
Implements issue CURA-4590.
2017-11-20 13:41:28 +01:00
Ghostkeeper
2974c4d7ab
Merge branch 'cura/Cura/master' of https://github.com/maukcc/Cura into maukcc-cura/Cura/master
2017-11-20 13:04:34 +01:00
orel Windows
565574a183
Replace the print temperature setting used in gstart code as layer 0 print temperature seems more relevant.
2017-11-20 10:59:57 +01:00
orel Windows
05b4689bd6
Improve discoeasy200 profile, especially the machine gcode start as it uses 'print_temperature' which is an invalid Cura setting.
2017-11-20 10:40:25 +01:00
ChrisTerBeke
f48539cc93
Merge pull request #2685 from Ultimaker/container_stack_improvements
...
Container stack improvements
2017-11-17 13:09:54 +01:00
Ghostkeeper
94dd524785
Add setting to determine whether to use firmware retraction
...
This allows printers to determine this for themselves. By default it's based on the g-code flavour in the same way as it is now implemented in the engine.
Fixes #1097 .
2017-11-17 11:13:15 +01:00
Ghostkeeper
f27494d60a
Move ironing into shell category
...
It is no longer considered experimental.
2017-11-17 10:59:14 +01:00
Ghostkeeper
15a50511b7
Don't crash if support density is 0
...
Found while working on CURA-4523.
2017-11-17 10:57:23 +01:00
Ruben D
8dd91519a6
Move Support Chunk Size out of children of skip_some_zags
...
The rule is that leaf settings are the ones that are used by the engine. The support_skip_some_zags setting is used by the engine.
2017-11-15 00:54:08 +01:00
MaukCC
b081b686a8
Merge branch 'master' into cura/Cura/master
2017-11-14 11:59:35 +01:00
MaukCC
38882c6d13
Update cartesio.def.json
2017-11-14 10:53:51 +01:00
maukcc
ef2d9b0468
Cartesio profiles
...
updated prime tower
update PC profiles
2017-11-14 10:30:10 +01:00
Ruben D
6d05c320a8
Remove disfunctional initial layer z offset settings
...
The pull request for the engine wasn't merged. It looks like the pull request for the front-end settings wasn't merged either, but here they are. They shouldn't be here.
Fixes #2744 .
2017-11-11 17:51:33 +01:00
ChrisTerBeke
88cf40e2d7
Merge branch 'master' into container_stack_improvements
2017-11-10 14:35:13 +01:00
Lipu Fei
637d1a1da3
Fix Vertex Delta K8800 definition file
2017-11-09 10:37:51 +01:00
Lipu Fei
b0144c7f10
Merge pull request #2740 from kaleidoscopeit/master
...
New machine definition : Deltacomb 3D
2017-11-09 10:33:53 +01:00
Lipu Fei
183c63f765
Merge pull request #2720 from Ultimaker/Update_Infill_Patern_Description
...
Add_tri-hexagon_and_cross_to_pattern_description
2017-11-09 08:14:35 +01:00
Brecht Nuyttens
873862efd7
Fixed Vertex Delta Definition
2017-11-07 16:54:18 +01:00
kaleidoscopeit
5008d63cfe
New machine definition : Deltacomb 3D
2017-11-06 10:01:57 +01:00
ChrisTerBeke
d32b7f0091
Merge branch 'master' into container_stack_improvements
2017-11-06 09:49:44 +01:00
Ruben D
0d71443bd2
Move 'Remove Empty First Layers' setting to mesh fixes category
...
It used to be in 'support' since it's something you may want to decide on depending on whether you have support or not. It could also go in 'Special Modes', but I think this is more specified.
2017-11-05 23:24:07 +01:00
Andreea Scorojitu
1d5d8c5ac0
Add_tri-hexagon_and_cross_to_pattern_description
2017-11-03 15:02:03 +01:00
Diego Prado Gesto
a4441e2bdb
CURA-4481 Setting description improved
2017-11-02 13:20:25 +01:00
Ghostkeeper
202f7f87f8
Remove ID from definition files
...
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.
Contributes to issue CURA-4243.
2017-11-02 12:53:06 +01:00
ChrisTerBeke
743285f426
Merge branch 'master' into container_stack_improvements
2017-11-01 12:32:37 +01:00
alekseisasin
fb87b73bbe
Merge pull request #2591 from BagelOrb/trihex_infill
...
trihex infill
2017-10-31 17:25:31 +01:00
ChrisTerBeke
4701518404
Add default position to fdm extruder definition - CURA-4482
2017-10-31 10:23:30 +01:00
