22419 Commits

This Branch

This Branch

All Branches

Author	SHA1	Message	Date
Nino van Hooff	2dc4681d91	Remove some mid-sentence newlines from issue templates ... Newlines are tragically not ignored by Github when rendering issue\ templates, it seems	2019-12-06 14:29:05 +01:00
Nino van Hooff	c47aca2f1b	Break down the issue template header into sections. ... I fear people might simply ignore the header, which is surrounded by comment tags. Having headings for all important pieces of information might make them stand out more.	2019-12-06 14:23:42 +01:00
Nino van Hooff	dd8993e88c	revert 0 buildvolume edgedisallowedsize for one_at_a_time ... Turns out that the artificial disallowed area around the inside of the build volume was necessary to take the brim into account when deciding whether a model was outside the buildvolume. The issue for which I removed this in the first place seems not to be an issue anymore due to other commits Reverts and e5fb9fb8 and e5c9bca CURA-6522	2019-12-06 12:17:21 +01:00
Nino van Hooff	4ad954f23e	Fix TestCuraSceneNode ... CURA-6522	2019-12-06 12:00:40 +01:00
Nino van Hooff	f4c68f4e71	Fix two mypy warnings ... CURA-6522	2019-12-06 11:47:07 +01:00
Nino van Hooff	2d8a415a69	Use the printing area (hull + adhesion for one-at-a-time) instead of ... convex hull for build volume collision detection. The convex hull is not suitable for this purpose because for one-at-a-time it includes the machine head polygon, which should be allowed to travel outside the build volume CURA-6522	2019-12-06 11:08:55 +01:00
jos@mauk.cc	950e96da2d	HMS434 update ... Z seam changed PLA quality profiles deleted	2019-12-06 08:54:51 +01:00
Ghostkeeper	f7709c11bc	Merge branch 'master' of ssh://github.com/Ultimaker/Cura	2019-12-05 15:31:51 +01:00
Ghostkeeper	4a9f09fa67	Merge branch 'patch-1' of https://github.com/juanluisvaladas/Cura into juanluisvaladas-patch-1	2019-12-05 15:30:42 +01:00
Jaime van Kessel	4811f15a7b	Merge pull request #6662 from Ultimaker/CURA-6981_add_build_type ... CURA-6981 Add build_type into crash reports and stats	2019-12-05 15:09:38 +01:00
Jaime van Kessel	b77de636d4	Prevent crashes when a variant could not be found ... This should not happen, but we've seen some cases where it would cause a crash, usually when a previous upgrade did something a bit weird (in this specific case; a printer with an empty variant, whereas it should have a variant). Since any change that the user will make will ensure that the variant is no longer empty (eg; any selection of a variant will mean it's no longer empty) and that there is no way back, it should be pretty safe to ignore the situation as it will resolve itself eventually CURA-6992	2019-12-05 14:19:18 +01:00
Jaime van Kessel	cd7f0e8a76	Fix case where a global profile would be recognised as a extruder profile ... CURA-6991	2019-12-05 14:17:55 +01:00
Jaime van Kessel	95cffb6710	Fix machine duplication when switching configuration	2019-12-05 14:06:52 +01:00
Ghostkeeper	250774c4cd	Merge branch 'master' of https://github.com/iLyngklip/Cura into iLyngklip-master	2019-12-05 11:19:42 +01:00
ninovanhooff	19da7b932a	Merge pull request #6751 from Ultimaker/CURA-6994 ... CURA-6994/Prevent deleting comments from Start/End G-codes	2019-12-04 15:42:52 +01:00
Nino van Hooff	fc060f7724	Do not show any object shadows in all_at_once mode. ... Also DRYed up the one_at_a_time check CURA-6522	2019-12-04 15:33:31 +01:00
Nino van Hooff	b30b641034	Merge remote-tracking branch 'origin/CURA-6522_one_at_a_time_overlapping_build_area' into CURA-6522_one_at_a_time_overlapping_build_area	2019-12-04 14:28:48 +01:00
Nino van Hooff	e2db4e873d	Add paramteter to Config Parser constructor to prevent comments in ... Gcode to be remnoved by upgrade, as in CURA-6994 CURA-6522	2019-12-04 14:28:30 +01:00
jos@mauk.cc	6d8052656c	HMS434 update ... bed temp initial layer	2019-12-04 10:10:05 +01:00
Ghostkeeper	961cd937b4	Correct start and end g-code ... According to the thread at #6673 this works. Fixes #6673.	2019-12-04 09:58:19 +01:00
Dimitriovski	74d919a5d2	Prevent deleting comments from Start/End G-codes by changing the comment_prefixes in ConfigParser ... CURA/6994	2019-12-03 14:40:54 +01:00
Jeff Kazules	726561bf30	Increase printer size and add disallowed areas ... With the stock firmware of the Ender 3, the size of the original printer was wrong, causing the model to land in a different place on the build plate. This led people to believe that the printer could take bigger prints. However it couldn't; it was just not allowing to print all the way down to the coordinate origin at 0,0. This makes the printer bigger but also adds disallowed areas so that you can't print anything near 0,0. Fixes #6267.	2019-12-03 13:39:50 +01:00
Juan-Luis de Sousa-Valadas Castaño	eea4df12a7	Spanish i18n fix fillament weight	2019-12-02 23:30:54 +01:00
jos@mauk.cc	055fc1450d	HMS434 update	2019-12-02 16:13:47 +01:00
jos@mauk.cc	bdc3ceeb52	HMS434 update ... acceleration and line width	2019-12-02 14:34:36 +01:00
Jaime van Kessel	45bbb189ce	Fix machine duplication when switching configuration	2019-12-02 13:59:50 +01:00
fieldOfView	01f5956871	Fix typo in content disposition header	2019-12-02 12:11:10 +01:00
Benoit Miller	e4c7a4752e	Merge branch 'master' of https://github.com/Ultimaker/Cura into voron2-support	2019-12-01 14:46:12 -05:00
Jaime van Kessel	318e5f6137	Merge pull request #6724 from translucentfocus/patch-1 ... Fixed typo	2019-11-28 16:56:00 +01:00
jos@mauk.cc	070f9e1537	HMS434 update ... small changes	2019-11-28 10:00:53 +01:00
Remco Burema	3e32596e23	Merge pull request #6722 from Ultimaker/CURA-6978 ... CURA-6978/Added the project name in Window Title	2019-11-28 08:39:26 +01:00
translucentfocus	4fc32b036e	Fixed typo ... Only correcting in master; may want to consider correcting in other branches	2019-11-27 11:46:07 -06:00
Dimitriovski	084f55b611	Removed hard-coded name for Ultimaker Cura to use applicationDisplayName ... CURA-6978	2019-11-27 15:35:09 +01:00
Dimitriovski	9522ce2b78	Added the project name in Window Title ... CURA-6978	2019-11-27 11:59:19 +01:00
Mathias Lyngklip Kjeldgaard	8835a0cb99	Fixed a typo in the title ... I noticed a typo in the title of the plugin, so that is fixed. I also added more info to the description.	2019-11-26 20:20:45 +01:00
Jaime van Kessel	b5bf3e8e85	Merge branch 'mb-bridge-skin-over-sparse-infill' of https://github.com/smartavionics/Cura	2019-11-26 15:41:04 +01:00
KOUBeMT	1ef5805baf	N08_Nozzle_profile_fine_tune	2019-11-25 16:53:42 +01:00
Jaime van Kessel	b1072029ba	Merge branch 'CURA-6971_add_break_prep_temp' of github.com:Ultimaker/Cura	2019-11-25 13:48:27 +01:00
Jaime van Kessel	80719d4724	Mark disabled extruders when saving project	2019-11-25 11:13:07 +01:00
Jaime van Kessel	028a60318c	Add extra tag if crash was during startup or not	2019-11-22 15:43:45 +01:00
Jaime van Kessel	466c90ca6c	Add some extra context info to the crashes	2019-11-22 14:41:54 +01:00
Jaime van Kessel	c7649e3db1	Add some extra tags to make crash reports more traceable	2019-11-22 14:04:35 +01:00
Jaime van Kessel	6c8fddc765	Add sentry logger to display breadcrumbs	2019-11-22 13:26:17 +01:00
Jaime van Kessel	23057f786f	Add initial stubs for sentry logging	2019-11-22 12:59:05 +01:00
Remco Burema	25f0460231	Add missing 'material break preparation temperature'. ... part of CURA-6971	2019-11-22 12:01:46 +01:00
Jaime van Kessel	74b5af3edd	Merge branch 'CURA-6965_fix_pause_at_height' of github.com:Ultimaker/Cura	2019-11-22 11:21:33 +01:00
Jaime van Kessel	997f19ba26	Prevent flicking behavior for machine selection ... Contributes to #6684	2019-11-22 11:02:19 +01:00
jos@mauk.cc	c2efca9025	HMS434 update	2019-11-21 17:06:28 +01:00
KOUBeMT	f7d7f53516	Adding_N08_HIPS_PVA_TPU	2019-11-21 16:53:01 +01:00
jos@mauk.cc	7c4eeb3b23	HMS434 update	2019-11-21 16:42:59 +01:00