137 Commits

Author	SHA1	Message	Date
Ghostkeeper	b05697b0d5	Also cancel pre-heating bed from Cura after time-out ... Printers that don't automatically turn off their heated bed will get the task to do so by Cura then. Contributes to issue CURA-3161.	2017-02-07 17:21:14 +01:00
Ghostkeeper	57ec987cd9	Disable pre-heat if temperature is invalid ... Contributes to issue CURA-3161.	2017-02-07 17:13:36 +01:00
Ghostkeeper	8d09c53896	Make pre-heat button cancel if currently heating ... This is based on the timer, which is locally. Eventually we'd want to make the timer update every now and then or so. Contributes to issue CURA-3161.	2017-02-07 16:46:22 +01:00
Ghostkeeper	9b235aebf2	Add clock icon to pre-heat countdown ... It's aligned left of the pre-heat countdown and only visible if the countdown is visible. Contributes to issue CURA-3161.	2017-02-07 16:38:28 +01:00
Ghostkeeper	8e25a1c73f	Also use central pre-heat time when sending time to printer ... Oops. Contributes to issue CURA-3161.	2017-02-07 16:32:36 +01:00
Ghostkeeper	1a902b21bb	Store default pre-heat time in central location ... Its default is 900s or 15 minutes. QML now requests the time-out time and sends it on to the printer. Contributes to issue CURA-3161.	2017-02-07 16:29:41 +01:00
Ghostkeeper	d705fb1d76	Document why we set endTime to the current date initially ... Contributes to issue CURA-3161.	2017-02-07 16:24:28 +01:00
Ghostkeeper	d3d36d47eb	Add countdown timer for pre-heat time ... Not happy with how there is '900' in multiple places in the code. I might do something about that later. Contributes to issue CURA-3161.	2017-02-07 16:22:47 +01:00
Ghostkeeper	559b40867e	Call pre-heat if pre-heat button is pressed ... Contributes to issue CURA-3161.	2017-02-07 13:29:57 +01:00
Ghostkeeper	f24d778cc5	Disable pre-heat button when not connected ... This covers the case when there is no printer added as well as the case where a printer is added but not connected. Contributes to issue CURA-3161.	2017-02-07 12:51:02 +01:00
Ghostkeeper	b1448887ba	Add button to pre-heat build plate ... This is the one. The actual commit that implements the issue. It doesn't do anything yet, this button, but it's how it should look. Contributes to issue CURA-3161.	2017-02-06 16:45:52 +01:00
Ghostkeeper	b1a8b28e87	Bind default pre-heat temperature to current build plate temperature ... Currently the setting 'resets' when you go out of the print monitor mode. That wasn't the original intention but it works kind of nicely. We'll bring it up in a meeting whether this needs to be changed. Contributes to issue CURA-3161.	2017-02-06 15:44:40 +01:00
Ghostkeeper	78fed0531d	Fix hovering the setting box ... The 'hovered' property was taken from the example of the setting item, but that doesn't exist apparently. I looked up how it is normally done in QML. Contributes to issue CURA-3161.	2017-02-06 15:17:59 +01:00
Ghostkeeper	27ff55d75b	Add binding to current maximum bed temperature ... Instead of the MAXTEMP placeholder. Contributes to issue CURA-3161.	2017-02-06 15:09:18 +01:00
Ghostkeeper	3fb625109e	Add text field for target pre-heat temperature ... I'm sure it's quite buggy on all sides though. Contributes to issue CURA-3161.	2017-02-03 17:04:31 +01:00
Ghostkeeper	abb9b8d7f0	Add box for build plate monitoring ... This one's a bit bigger. It is supposed to contain the pre-heat button. Contributes to issue CURA-3161.	2017-02-03 15:52:14 +01:00
Ghostkeeper	03e16b5398	Fix material colour when no printer is selected ... It's invisible anyway, but the hex colour gives no errors at least. Contributes to issue CURA-3161.	2017-02-03 15:49:18 +01:00
Ghostkeeper	1305dd88d7	Remove old extruder monitoring code ... It has been replaced by these fancy new boxes. Contributes to issue CURA-3161.	2017-02-03 15:20:24 +01:00
Ghostkeeper	a6c244f969	Use setting separator margin between material colour and name ... It's a bit smaller. Looks like it belongs together now. Contributes to issue CURA-3161.	2017-02-03 15:06:21 +01:00
Ghostkeeper	41c94fd247	Add variant names to extruder boxes ... In the bottom-right corner. Contributes to issue CURA-3161.	2017-02-03 15:03:24 +01:00
Ghostkeeper	ee3e0ba6ab	Add material indication to extruder boxes ... Only if a material is known of course. But the case where it is unknown is not tested. Contributes to issue CURA-3161.	2017-02-03 14:52:09 +01:00
Ghostkeeper	687cdcc30e	Add grey border between extruder boxes ... This is done by fitting tightly a rectangle around the grid of boxes. The boxes themselves have a white background but there is spacing between the boxes, which results in the little border. Contributes to issue CURA-3161.	2017-02-03 13:54:37 +01:00
Ghostkeeper	9546c85967	Add boxes containing information on extruders ... These are meant to eventually replace the bullet-list of information we currently have. Contributes to issue CURA-3161.	2017-02-03 13:50:17 +01:00
Ghostkeeper	7b8d41cb8f	Remove old connected printer header ... It has been replaced by a nicer header. Contributes to issue CURA-3161.	2017-02-02 14:48:06 +01:00
Ghostkeeper	c7a91f07d2	Add label for printer connection text to header ... Also fixed the indenting of the previous two labels to use spaces instead of tabs. I knew I was going to forget putting it back to spaces after working on a different project that uses tabs. The information is duplicated now. I'll remove the old one promptly. Contributes to issue CURA-3161.	2017-02-02 14:45:44 +01:00
Ghostkeeper	1f0bcc1abd	Add header bar for print monitor ... It lists the name of the printer it is connected to, and the address on the right side. This won't work for USB printing (it'll give errors there). I'll solve that later. Contributes to issue CURA-3161.	2017-02-02 14:34:40 +01:00
Ghostkeeper	5c2f1a935a	Move monitorLabel into PrintMonitor.qml ... It's a label that belongs to the print monitor after all. Let the print monitor file decide how it's going to look. Contributes to issue CURA-3161.	2017-02-01 17:31:36 +01:00
fieldOfView	038c736756	Tweak margins of print monitor	2016-09-22 09:01:07 +02:00
fieldOfView	ab50ac0d89	Don't show possibly incorrect materials in print monitor	2016-09-14 13:59:00 +02:00
fieldOfView	aa39a44219	Update i18n context for consistency	2016-09-12 16:41:24 +02:00
fieldOfView	fcfcfa37fb	Tweak monitor items for long jobnames ... CURA-2125	2016-08-15 17:09:29 +02:00
fieldOfView	505da1a9a7	Change "Hotend temperature" to the name of the extruder ... UXD-79	2016-08-10 17:55:52 +02:00
fieldOfView	2963a64fc2	Change "Bed Temperature" to "Build Plate Temperature" ... UXD-80	2016-08-10 17:55:52 +02:00
fieldOfView	e551898e04	Add a connection string to the printmonitor ... CURA-2091	2016-08-09 18:43:09 +02:00
fieldOfView	ed669925ad	Disable print monitor if the printer is not (yet) ready to receive commands ... CURA-1851	2016-08-04 15:06:22 +02:00
fieldOfView	1057634e47	Remove (non-functional) layer number from print monitor ... CURA-1940	2016-07-25 17:39:43 +02:00
Jaime van Kessel	0477955974	Sidebar stuff is now properly done in a loader (and in seperate files) ... CURA-1036	2016-07-07 17:02:29 +02:00