Ghostkeeper
6e5f7ac28a
Merge branch 'feature_support_top_bottom_speed'
...
Contributes to issue CURA-3491.
2017-04-25 16:46:30 +02:00
Ghostkeeper
15593de404
Fix extruder number dependency of support roof pattern
...
It was depending on support bottom extruder.
Contributes to issue CURA-3491.
2017-04-24 17:31:07 +02:00
Ghostkeeper
2eae1cdf22
Move support roof settings above support bottom settings
...
This was deemed the most logical ordering.
Contributes to issue CURA-3491.
2017-04-24 14:28:10 +02:00
Ghostkeeper
16bc9db06d
Simplify gradual infill steps maximum formula
...
The case where it reaches '20' is incorrect, it should never give an error, so it should've been 999999 or something. This case is also overly complex.
Say that P is 'infill_line_distance > 0' and Q is 'spaghetti_enabled'...
Then it would be the logarithmic if (P and not Q)...
Then it would be 0 or 20 if (not (P and not Q)), which is ((not P) or Q)...
Then it would be 20 if (((not P) or Q) and not Q), which is (not P)...
And it would be 0 if (((not P) or Q) and Q), which is Q.
So therefore it can be simplified to: 20 if (not P) else 0 if Q else logarithmic. But 20 became 999999, hence the above formula.
Contributes to issue CURA-3700.
2017-04-19 16:24:39 +02:00
Tim Kuipers
50a99eb2b1
fix: dont err on gradual infill when printing hollow (CURA-3700)
2017-04-19 13:50:06 +02:00
Ghostkeeper
cc23c72124
Merge branch 'revise_jellybox_support' of github.com:IMADE3D/Cura into IMADE3D-revise_jellybox_support
2017-04-19 10:36:20 +02:00
Ghostkeeper
58bf3e7ab3
Merge branch 'master' of github.com:Rigid3D/Cura into Rigid3D-master
2017-04-19 09:27:54 +02:00
Filip Goc
3c85159b05
swap M109 for M104 in the start gcode
...
It’s necessary to preheat the nozzle before the auto bed leveling
procedure to loosen up leftover filament that may had hardened on the
nozzle.
2017-04-18 20:44:55 +02:00
Tim Kuipers
fdf20fcb15
fix: forgotten floor in descriptions (CURA-3491)
2017-04-18 13:49:55 +02:00
Ghostkeeper
e33d4693f0
Merge branch '2.5'
2017-04-18 10:30:01 +02:00
Ghostkeeper
9ad85ce235
Move prime tower 1mm down
...
The combination PC-0.4 and PVA-0.8 wouldn't print because the raft was getting so big that it intersected with the prime tower. Moving the prime tower 1mm down allows us to print again.
Contributes to issue CURA-3650.
2017-04-18 10:29:41 +02:00
Mehmet Sutas
b908e3a201
Rigid3D Zero2 Machine Definition
2017-04-16 01:00:27 +03:00
Ghostkeeper
7151dc0381
Merge branch '2.5'
2017-04-14 17:06:37 +02:00
Ghostkeeper
c3d18bc256
Remove lower warnings for jerk settings
...
It's not a problem to have lower jerk. It'll just print corners quite slow. But sometimes that's necessary, for example for PVA.
Contributes to issue CURA-3650.
2017-04-14 17:06:18 +02:00
Ghostkeeper
9b06d7dd80
Relax warning constraints for top and bottom thickness
...
With very thick layers, fewer layers will still provide enough strength to not sag. 2 is quite a hard minimum though because there are 2 different orientations.
Contributes to issue CURA-3650.
2017-04-14 16:26:14 +02:00
Ghostkeeper
d6f49d4c12
Merge branch '2.5'
2017-04-14 15:04:05 +02:00
Ghostkeeper
541e28a387
Allow exactly 2 line widths for prime tower
...
We give a warning when it's 2 or fewer lines in the prime tower, but 2 should be allowable. It works quite well.
Contributes to issue CURA-3650.
2017-04-14 14:58:30 +02:00
Jaime van Kessel
c087f4b0dc
Merge branch 'master' of git://github.com/maukcc/cura
2017-04-14 14:30:25 +02:00
Ghostkeeper
ac46c4358b
Merge branch '2.5'
2017-04-14 11:56:57 +02:00
Ghostkeeper
e72d5ce93f
Make raft middle thickness warn based on nozzle size
...
Whether the layer is too thick to extrude properly depends on the nozzle size, not on the line width.
Contributes to issue CURA-3650.
2017-04-14 11:54:20 +02:00
Ghostkeeper
a8df94f5b3
Merge branch '2.5'
2017-04-14 10:29:43 +02:00
Ghostkeeper
137b5309fd
Relax warning value for support interface thickness
...
It was being violated by the superdraft profiles. With very thick layers, 2 layers of interface suffices. But 2 layers is not quite enough for very thin layers. So I'm making it scale a bit more slowly with an offset.
Contributes to issue CURA-3650.
2017-04-14 10:28:13 +02:00
Ghostkeeper
fb29948f88
Update description of support_roof/bottom_enable
...
Better terminology according to our UX designer.
Contributes to issue CURA-3491.
2017-04-13 18:10:28 +02:00
Ghostkeeper
548338440a
Rename all support bottom settings to support floor
...
Only in the front-end though. No settings are renamed. No documentation updated. As far as the back-end implementation is concerned, it's still called support bottom.
Contributes to issue CURA-3491.
2017-04-13 17:11:36 +02:00
Tim Kuipers
ef9b705cc4
Merge remote-tracking branch 'origin/feature_support_mesh'
2017-04-13 11:13:25 +02:00
CRojasV
3e19261fa8
New version files
...
This time it have the platform position configuration, and it have version number error fixed.
2017-04-12 11:10:22 -05:00
CRojasV
d71e964be7
Deleted to Fix platform position
...
This file was deleted because it don't have the correct platform position setup
2017-04-12 11:08:24 -05:00
CRojasV
0a58214d74
Delete File, to add a fixed one
...
This file was delete because it don´t have the current location of the platform
2017-04-12 11:06:39 -05:00
CRojasV
28df570311
Modify versión Number
...
fixed the versión number.
2017-04-12 09:06:57 -05:00
MaukCC
3319d07729
Update cartesio.def.json
2017-04-12 15:02:19 +02:00
MaukCC
d0cc5c1a0c
Update cartesio.def.json
2017-04-12 10:44:29 +02:00
MaukCC
14e65ae2b8
Update cartesio.def.json
2017-04-12 10:10:57 +02:00
CRojasV
84a5717d04
Add files via upload
...
Adding makeR printers profile configuration files
2017-04-11 15:39:12 -05:00
CRojasV
bd41655772
Delete makeR_prusa_tairona_i3_platform.stl
...
Delete file in wrong path
2017-04-11 15:22:52 -05:00
CRojasV
e70409a897
Delete makeR_pegasus_platform.stl
...
Delete file in wrong path
2017-04-11 15:22:09 -05:00
CRojasV
620b9a2516
Add files via upload
...
Adding Platforms for our 3d printers
2017-04-11 15:18:29 -05:00
Jack Ha
2b8e6eb5c8
Merge branch 'feature_peopoly_moai'
2017-04-11 10:35:48 +02:00
Jack Ha
4c1199d75c
Revert permissions on file. CURA-3665
2017-04-11 10:35:25 +02:00
Jack Ha
24211624e6
Added inherits fdmprinter for Peopoly Moai. CURA-3665
2017-04-11 10:34:52 +02:00
fieldOfView
f064500ed5
Don't inherit from Ultimaker printers
2017-04-10 14:59:11 +02:00
Ghostkeeper
cb7c25f92f
Merge branch 'master' into feature_support_top_bottom_speed
2017-04-10 10:52:31 +02:00
MaukCC
39befe1c22
Update cartesio.def.json
2017-04-07 13:06:14 +02:00
Ghostkeeper
5a39ed6793
Merge branch 'maukcc-master'
2017-04-07 10:09:53 +02:00
Tim Kuipers
3b9e14eeec
Revert "The magic_spiralize setting is no longer settable per mesh (or extruder)."
2017-04-06 17:54:19 +02:00
Tim Kuipers
36255fcabb
The magic_spiralize setting is no longer settable per mesh (or extruder)
...
by smartavionics, Mark Burton
2017-04-06 17:51:06 +02:00
Mark Burton
71e00d1407
The magic_spiralize setting is no longer settable per mesh (or extruder).
2017-04-06 16:17:33 +01:00
MaukCC
2ea6487368
Update cartesio.def.json
2017-04-06 15:27:59 +02:00
MaukCC
d7caa860a7
Update cartesio.def.json
2017-04-06 14:13:05 +02:00
fieldOfView
7adc904cf1
Remove absolute value warnings by moving some values to the machine definition
2017-04-06 13:17:24 +02:00
fieldOfView
b4698d9ec2
Adjust minimum/maximum warning values
2017-04-06 12:54:19 +02:00
