5130 Commits

Author	SHA1	Message	Date
ChrisTerBeke	7b30e9a6fc	Merge pull request #2856 from Ultimaker/simulation_view_gradient_changes ... Adapt gradient in Simulation view for better visualization of feedrates	2017-11-28 10:34:10 +01:00
ChrisTerBeke	b74ebc57b4	Fix per extruder setting value depending on extruder count - CURA-4627	2017-11-27 17:00:57 +01:00
Ghostkeeper	13124ae983	Don't make filter_out_tiny_gaps a child setting of fill_perimeter_gaps ... Parent settings are not used by the engine. Or they shouldn't be, because the parent settings are disabled by the front-end when all of their child settings are overwritten. Then you'd have a parent setting that is used by the engine but you can't modify it. Also, the command-line slicing doesn't load parent settings since it can't parse categories and such.	2017-11-27 13:58:34 +01:00
Diego Prado Gesto	fa00a17c78	Make UI changes in the Simulation View for adapting the color gradient ... in the Feedrate color scheme. Due to the travel speed is normally very high compared with the other speeds in the model, the gradient is now gradual instead of linear in order to show more changes in the low values and less changes in the high values. Adapt also the button styles and themes' colors. Set the play/pause button to the left and reduce the size.	2017-11-26 21:21:18 +01:00
Ruben D	0d0bcb8aea	Clip text that exceeds the width of the text box. ... For #2802.	2017-11-26 18:48:27 +01:00
Ruben D	8847325cf8	Remove limit on length for integer arrays ... The integer arrays were limited because the text in the text field is not properly clipped. I found a fix for that. Fixes #2802.	2017-11-26 18:47:58 +01:00
Diego Prado Gesto	d0c1569da6	Merge branch 'fieldOfView-feature_simulation_ux_tweaks'	2017-11-24 15:48:39 +01:00
Lipu Fei	dad2dfda89	No need to set currentItem after a material is imported ... CURA-4546	2017-11-23 14:08:10 +01:00
Aleksei Sasin	1141368682	Hide icons if monitor view is selected CURA-4527	2017-11-23 12:54:53 +01:00
Mark	3477b902ab	Merge pull request #2834 from Ultimaker/CURA-4527_view_orientation ... Cura 4527 view orientation	2017-11-23 09:56:26 +01:00
Ghostkeeper	3823cca936	Disable Russian translation since it's incomplete ... The maintainer of this translation didn't want to continue spending time to keep his translation up-to-date. Contributes to issue CURA-4601.	2017-11-22 12:45:21 +01:00
Ghostkeeper	ffa418660a	Update Korean translations for 3.1 ... This adds empty translations and updates the line numbers and such. The original Korean translations for 3.0 are still retained. Contributes to issue CURA-4601.	2017-11-22 12:41:31 +01:00
Ghostkeeper	62113df3bd	Update Korean translations with 3.0 translations ... These are so wrong that Cura won't start with these translations loaded. We're asking for corrections. Contributes to issue CURA-4601.	2017-11-22 12:41:31 +01:00
Aleksei S	d7b230269b	The icons changed ... CURA-4527	2017-11-22 11:10:25 +01:00
Ghostkeeper	628e88a7e4	Update translation templates for every language ... These files are to be sent to the translators. Their old translations have been retained but new strings were added. Contributes to issue CURA-4601.	2017-11-21 16:59:56 +01:00
Ghostkeeper	1cb109d192	Update translation templates for Cura 3.1 ... Generated by calling 'make extract-messages'. This commit introduces a string freeze for Cura 3.1. Contributes to issue CURA-4601.	2017-11-21 16:51:40 +01:00
Diego Prado Gesto	b36f4e497a	Merge branch 'CURA-4595_remove_0.1_bam_quality' into 3.1	2017-11-21 15:22:21 +01:00
Jack Ha	92e273fba9	Merge branch '3.1' of github.com:Ultimaker/Cura into 3.1	2017-11-21 15:12:26 +01:00
Jack Ha	602e8c0e66	Changed 'Check material compatibility' to 'Check compatibility' because it's not only materials possibly being incompatible	2017-11-21 15:12:17 +01:00
Lipu Fei	b09ffaf9e2	Remove "Fine" 0.1mm quality for BAM ... CURA-4595	2017-11-21 13:35:59 +01:00
Diego Prado Gesto	b6e997c88d	CURA-4526 Delete LayerView plugin because it will be replaced with the ... SimulationView. This commit also adapts the code in order to accept the messages coming from the engine, with information about feedrates and line thicknesses. Add also some changes in the GCodeReader that reads feedrates and line thickness from the gcode file.	2017-11-21 10:47:29 +01:00
Mark	43f339f927	Update fdmprinter.def.json	2017-11-20 18:14:08 +01:00
Jack Ha	7219d84b91	CURA-4104 added settings for flow rate compensated extrusion	2017-11-20 18:13:28 +01:00
jack	f197508694	Merge pull request #2814 from Ultimaker/feature_maximum_resolution ... Maximum mesh resolution	2017-11-20 18:09:11 +01:00
Ghostkeeper	b875f06baf	Add setting to set the maximum mesh resolution ... Implements issue CURA-4590.	2017-11-20 18:04:34 +01:00
ChrisTerBeke	657a91c525	Merge pull request #2685 from Ultimaker/container_stack_improvements ... Container stack improvements	2017-11-20 17:42:26 +01:00
Ghostkeeper	085e933e34	Move ironing into shell category ... It is no longer considered experimental.	2017-11-20 17:39:10 +01:00
Ghostkeeper	df1a11ca07	Don't crash if support density is 0 ... Found while working on CURA-4523.	2017-11-20 17:38:39 +01:00
Ghostkeeper	91621497f0	Fix technical mistakes of Japanese translation ... There's a lot of keys that weren't added to the Japanese translation. Our program crashes on these because it can't find where it needs to fill in the argument.	2017-11-17 16:38:02 +01:00
Ghostkeeper	37163ec0b4	Add Japanese translation of cura.po ... It's quite bad though so let's see what improvements we can make.	2017-11-17 16:30:57 +01:00
Aleksei S	ce0510cee3	Hide icons if they overlap monitor button ... CURA-4527	2017-11-15 16:34:22 +01:00
Andreea Scorojitu	9bcc4da4a1	Merge branch 'master' of https://github.com/Ultimaker/Cura	2017-11-15 13:40:56 +01:00
Andreea Scorojitu	7aeaf661ae	Change_Color_UI_elements_CURA-4548	2017-11-15 13:40:46 +01:00
Ruben D	8dd91519a6	Move Support Chunk Size out of children of skip_some_zags ... The rule is that leaf settings are the ones that are used by the engine. The support_skip_some_zags setting is used by the engine.	2017-11-15 00:54:08 +01:00
Aleksei S	3d2868c336	Added icons ... CURA-4527	2017-11-15 00:43:17 +01:00
Diego Prado Gesto	720b9ebdfa	CURA-4556 Add profiles for AA0.25 and BAM material	2017-11-13 11:06:27 +01:00
Ruben D	6d05c320a8	Remove disfunctional initial layer z offset settings ... The pull request for the engine wasn't merged. It looks like the pull request for the front-end settings wasn't merged either, but here they are. They shouldn't be here. Fixes #2744.	2017-11-11 17:51:33 +01:00
Andreea Scorojitu	723d593827	Merge branch 'master' of https://github.com/Ultimaker/Cura	2017-11-09 12:02:13 +01:00
Andreea Scorojitu	477e295e70	Change_Color_UI_elements_CURA-4548	2017-11-09 12:02:01 +01:00
Lipu Fei	637d1a1da3	Fix Vertex Delta K8800 definition file	2017-11-09 10:37:51 +01:00
Lipu Fei	b0144c7f10	Merge pull request #2740 from kaleidoscopeit/master ... New machine definition : Deltacomb 3D	2017-11-09 10:33:53 +01:00
kaleidoscopeit	714c0f25da	Set all "setting_version" in qualitites to 4	2017-11-09 10:25:30 +01:00
Andreea Scorojitu	d6f856e900	Merge branch 'master' of https://github.com/Ultimaker/Cura	2017-11-09 08:47:09 +01:00
Lipu Fei	183c63f765	Merge pull request #2720 from Ultimaker/Update_Infill_Patern_Description ... Add_tri-hexagon_and_cross_to_pattern_description	2017-11-09 08:14:35 +01:00
Andreea Scorojitu	d8d738be25	Change_Color_UI_elements_CURA-4548	2017-11-08 17:02:49 +01:00
Brecht Nuyttens	873862efd7	Fixed Vertex Delta Definition	2017-11-07 16:54:18 +01:00
Aleksei S	6e7e859a0a	Introduced Lock Position functionality ... CURA-4527	2017-11-07 10:59:23 +01:00
Aleksei S	7722e438c9	Changed orientation button location, adjusted call functins ... CURA-4527	2017-11-06 10:28:07 +01:00
kaleidoscopeit	5008d63cfe	New machine definition : Deltacomb 3D	2017-11-06 10:01:57 +01:00
Ruben D	0d71443bd2	Move 'Remove Empty First Layers' setting to mesh fixes category ... It used to be in 'support' since it's something you may want to decide on depending on whether you have support or not. It could also go in 'Special Modes', but I think this is more specified.	2017-11-05 23:24:07 +01:00