Ghostkeeper
72c0295c81
Set nozzle tip diameter for 0.8mm cores
...
They have a outer diameter of 2mm.
Contributes to issue CURA-3650.
2017-04-14 14:58:23 +02:00
Ghostkeeper
e49316d1b9
Set nozzle switch prime speed in AA 0.8mm profiles to 20
...
Some of them ended up as 15 because that's the default in the Ultimaker 3. This was done correctly by the profile optimiser because this setting was not specified by the original profiles, but it should've been 20 for all AA 0.8mm profiles.
Contributes to issue CURA-3650.
2017-04-13 18:21:17 +02:00
Ghostkeeper
907d064684
Copy 0.8mm variants of UM3 to UM3E
...
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason.
Contributes to issue CURA-3650.
2017-04-13 09:05:56 +02:00
Ghostkeeper
53476b62bc
Re-add nozzle size for 0.8mm variants
...
Arguably the most important one. This is omitted from the original profiles so the original script assumed it had a nozzle size of 0.4mm.
Contributes to issue CURA-3650.
2017-04-12 16:33:25 +02:00
Ghostkeeper
febd1f0f79
Make sure that the UM3 definition is taken into account when optimising
...
Otherwise it acts as if the settings were the defaults for FDMPrinter rather than defaulting to the current UM3 settings.
Contributes to issue CURA-3650.
2017-04-12 16:29:36 +02:00
Ghostkeeper
397c2666f0
Optimise profiles for 0.8mm cores
...
Sample testing confirms that these are equal to their originals. Nylon, PLA and PVA were already optimised, but ABS and CPE weren't. Now all are optimised except some 0.4mm core profiles. I'll see to those next. Note that the filament flow compensation setting is still wrong in these profiles (it was wrong in the original profiles as well).
Contributes to issue CURA-3650.
2017-04-12 15:38:07 +02:00
Jaime van Kessel
0c1829af1e
Revert "Upgrade built-in instance containers"
...
This reverts commit b162be4df8c12c89112ba558136e87b63e67e713.
2017-03-16 11:15:20 +01:00
Ghostkeeper
b162be4df8
Upgrade built-in instance containers
...
These are now upgraded to version 3, meaning that they will have to increase their version numbers and remove any start_layers_at_same_position settings they define. None of these profiles define any start_layers_at_same_position so it's just the version number then.
Contributes to issue CURA-3479.
2017-03-10 16:49:57 +01:00
Ghostkeeper
039c1b92de
Add profiles for 0.8mm nozzle sizes
2017-03-09 18:11:06 +01:00
Lipu Fei
fa71f22bf6
CURA-3480 Fix boolean values for Cartesio config files
2017-03-09 14:14:05 +01:00
MaukCC
e80ac13615
Update cartesio_0.8.inst.cfg
2017-02-24 12:39:16 +01:00
MaukCC
d0124dafd8
Update cartesio_0.25.inst.cfg
2017-02-24 12:39:16 +01:00
MaukCC
5a06dc5e2f
Update cartesio_0.4.inst.cfg
2017-02-24 12:39:16 +01:00
MaukCC
b9b7df1593
Update cartesio_0.8.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
94ab027499
Update cartesio_0.8.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
cb9e8b57de
Update cartesio_0.25.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
40f48f7825
Update cartesio_0.4.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
a4c65fda67
Update cartesio_0.8.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
2ba70c8453
Update cartesio_0.8.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
264b488b31
Update cartesio_0.25.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
d4f4ada2f0
Update cartesio_0.4.inst.cfg
2017-02-24 12:39:15 +01:00
MaukCC
c96e23e51c
Update cartesio_0.4.inst.cfg
2017-02-24 12:39:14 +01:00
MaukCC
047a078fb1
Update cartesio_0.25.inst.cfg
2017-02-24 12:39:14 +01:00
MaukCC
f123aec8bd
Update cartesio_0.25.inst.cfg
2017-02-24 12:39:14 +01:00
MaukCC
cadbecd1d1
Update cartesio_0.4.inst.cfg
2017-02-24 12:39:14 +01:00
MaukCC
031714d4f0
Update cartesio_0.8.inst.cfg
2017-02-24 12:39:12 +01:00
MaukCC
ad0d95c863
Update cartesio_0.4.inst.cfg
2017-02-24 12:39:12 +01:00
MaukCC
bebc5be17d
Update cartesio_0.25.inst.cfg
2017-02-24 12:39:12 +01:00
MaukCC
e2b208eebd
Update cartesio_0.4.inst.cfg
2017-01-31 09:02:31 +01:00
MaukCC
70a4d0bd52
Update cartesio_0.4.inst.cfg
2017-01-26 13:51:57 +01:00
MaukCC
e3aff8e2ac
Update cartesio_0.25.inst.cfg
2017-01-26 13:51:45 +01:00
MaukCC
c70229ff88
Update cartesio_0.8.inst.cfg
2017-01-26 13:51:34 +01:00
MaukCC
06830fe16a
Update cartesio_0.8.inst.cfg
2017-01-26 13:47:03 +01:00
MaukCC
50b65da860
Update cartesio_0.4.inst.cfg
2017-01-26 13:46:50 +01:00
MaukCC
5ba4e3549d
Update cartesio_0.25.inst.cfg
2017-01-26 13:46:37 +01:00
MaukCC
059c70968e
Update cartesio_0.8.inst.cfg
2017-01-26 12:39:21 +01:00
MaukCC
f68e09ce9a
Update cartesio_0.4.inst.cfg
2017-01-26 12:38:57 +01:00
MaukCC
873340376e
Update cartesio_0.25.inst.cfg
2017-01-26 12:38:26 +01:00
MaukCC
3a27deb4af
Update cartesio_0.8.inst.cfg
2017-01-25 12:49:37 +01:00
MaukCC
61d4877825
Update cartesio_0.25.inst.cfg
2017-01-25 12:49:18 +01:00
MaukCC
3751117f8f
Update cartesio_0.4.inst.cfg
2017-01-25 12:49:00 +01:00
MaukCC
ada08c8cbf
Delete cartesio_0.6.inst.cfg
2017-01-25 12:47:46 +01:00
MaukCC
be26aad89b
Create cartesio_0.25.inst.cfg
2017-01-12 10:52:20 +01:00
MaukCC
0b879a5e94
Create cartesio_0.8.inst.cfg
2017-01-12 10:51:52 +01:00
MaukCC
713cd5341d
Create cartesio_0.6.inst.cfg
2017-01-12 10:51:31 +01:00
MaukCC
b93e7d714f
Create cartesio_0.4.inst.cfg
2017-01-12 10:51:00 +01:00
Jaime van Kessel
510c988c43
Moved some setting functions back to definitions
...
CURA-3018
2016-11-25 09:39:19 +01:00
Jack Ha
be2a802aa2
Changed ultimaker3 def so relations are retained.
2016-11-24 17:05:06 +01:00
Jack Ha
072d33ec68
Fixed profiles by removing double entries and changing math.round to round.
2016-11-24 12:58:33 +01:00
Ghostkeeper
44f309226a
Make initial layer speed scale with normal speed
...
All profiles that set the print speed are edited as well to make sure that the initial layer speed is still the same.
Contributes to issue #1170 .
2016-11-24 10:19:49 +01:00
