61 Commits

Author	SHA1	Message	Date
Diego Prado Gesto	8086adf9ba	Update plugins/PostProcessingPlugin/scripts/ColorMix.py ... Okay Co-Authored-By: Hrybmo <john.hryb.4@gmail.com>	2019-03-09 20:41:54 -05:00
Diego Prado Gesto	ad820ad1e9	Update plugins/PostProcessingPlugin/scripts/ColorMix.py ... Okay Co-Authored-By: Hrybmo <john.hryb.4@gmail.com>	2019-03-09 20:41:35 -05:00
Diego Prado Gesto	986f9aa248	Update plugins/PostProcessingPlugin/scripts/ColorMix.py ... Sure Co-Authored-By: Hrybmo <john.hryb.4@gmail.com>	2019-03-09 20:41:00 -05:00
Diego Prado Gesto	7921b89f3e	Update plugins/PostProcessingPlugin/scripts/ColorMix.py ... Sure Co-Authored-By: Hrybmo <john.hryb.4@gmail.com>	2019-03-09 20:40:36 -05:00
Diego Prado Gesto	9fae1f29b1	Update plugins/PostProcessingPlugin/scripts/ColorMix.py ... Sure Co-Authored-By: Hrybmo <john.hryb.4@gmail.com>	2019-03-09 20:40:11 -05:00
John Hryb IV	3a979903aa	PostProcessingPlugin Script for 2-1 Dual Extruders - ColorMix 2-1 ... Marlin Commands: M163 - Set Mix Factor M164 - Save Mix Ability to set a mix ratio or blend at a defined layer or distance. Based on Geeetech's Color mixing software.	2019-02-19 23:40:36 -05:00
Ghostkeeper	5592d4fa60	Don't make retraction distance negative ... Apparently this got changed accidentally because of a merge in an unfortunate time.	2019-02-04 08:25:35 +01:00
Ghostkeeper	3018b1b3d4	Merge branch 'master' of https://github.com/griehsler/Cura into griehsler-master	2019-02-04 08:22:55 +01:00
Nico Salvador	39cdb3ed0a	Fixed typo in ChangeAtZ.py	2019-01-06 10:19:21 +08:00
griehsler	9bc63fb1f9	Merge remote-tracking branch 'upstream/master'	2019-01-04 23:57:58 +01:00
Mark	90aa8c1264	point people to a good example	2018-11-29 15:29:51 +01:00
griehsler	3a84a5868f	Merge branch 'master' into master	2018-10-31 21:44:44 +01:00
Ghostkeeper	c7b146c9fc	Don't make retract distances negative ... People are reporting that the retraction is reversed. We can't test it since we have no firmware that supports the command at all. So we'll just not make the retract distance negative. That seems more logical anyway if you read the documentation of M600 to the letter. Fixes #4249.	2018-10-25 13:54:00 +02:00
griehsler	5ae5dfd3ad	added x_position and y_position to postprocessing filamentchange parameters	2018-10-20 01:28:48 +02:00
Ghostkeeper	2eb9b111fc	Fix changing flow rate in dual extrusion ... This potentially set the flow rate to -1, since it was changing the flow rate to the old['flowrateTwo'] which was left at -1 since initialisation because it didn't update here.	2018-10-19 09:55:23 +02:00
Jaime van Kessel	13ab9ba384	Merge branch 'patch-1' of https://github.com/adecastilho/Cura	2018-10-02 13:15:48 +02:00
Amanda de Castilho	7e7f2aab6b	Update DisplayFilenameAndLayerOnLCD.py	2018-08-29 09:48:37 -07:00
Amanda de Castilho	f7fbc685d8	Update DisplayFilenameAndLayerOnLCD.py ... changed so that actual filename is displayed (or alternatively user can enter text to display) to LCD during print	2018-08-29 08:43:16 -07:00
Amanda de Castilho	a5baa90086	Rename DisplayFilenameAndLayerOnLCD to DisplayFilenameAndLayerOnLCD.py ... added the .py extention	2018-08-29 08:09:57 -07:00
Amanda de Castilho	6dbf0a5fb7	Create DisplayFilenameAndLayerOnLCD ... This plugin inserts M117 into the g-code so that the filename is displayed on the LCD and updates at each layer to display the current layer	2018-08-29 00:39:13 -07:00
Thomas Kriechbaumer	afb4440d64	add PauseAtHeight post-processing script for RRF	2018-08-22 13:46:49 +02:00
Ghostkeeper	6740c2bee9	Fix offset of initial layer height ... It would detect the height of the raft by looking at what the first Z coordinate is that it encounters on layer 0. This Z coordinate also includes the initial layer height though. If you pause lower than the initial layer height (but higher than 0), you'd expect to pause in the initial layer.	2018-08-17 11:24:39 +02:00
Jack Ha	b8ec1d0fa7	In relative mode, the feedback is still absolute and not relative. CURA-5480	2018-08-01 10:52:31 +02:00
Aleksei S	fca51ac41f	Set relative after getting to line G91	2018-07-25 13:44:58 +02:00
Lipu Fei	952bc54452	Make stretch script work with relative movements ... CURA-5480	2018-07-24 15:59:02 +02:00
Diego Prado Gesto	296b74b032	Set negative values to retraction in the filament change script. ... Fixes #4114	2018-07-24 10:48:52 +02:00
Ghostkeeper	54b990c0bd	Retract further if we can't set the temperature to stand-by temp ... Because we can't set the temperature and we don't know the correct temperature to set it back to, we will just retract further in order to prevent damage to the material. Contributes to issue CURA-5491.	2018-07-09 11:21:34 +02:00
Ghostkeeper	41857338cb	Use firmware retraction and temperature control settings ... Instead of deriving this from the g-code flavour, just use the actual settings that are made to control these two properties. Contributes to issue CURA-5491.	2018-07-09 09:27:11 +02:00
Ghostkeeper	b67339c3bf	Merge branch 'CURA-5491-pause-at-height' ... Contributes to issue CURA-5491.	2018-07-09 09:17:49 +02:00
Ghostkeeper	6977b8de6e	Make getValue return an int if it's an integer number ... This is a more generic solution to what's done in 7058ddbb66084bee9cd507ed69f031ec1262163e. Contributes to issue CURA-5491.	2018-07-09 09:01:52 +02:00
Ghostkeeper	96896088c3	Add spaces around equals operators ... As per our code style regulations.	2018-07-05 16:27:52 +02:00
Jack Ha	b77220b260	Add more ultigcode retract and unretract. CURA-5491	2018-07-03 13:41:14 +02:00
Jack Ha	e61ad750b7	Fixed UM3 Griffin and UM2 UltiGCode for Pause At Height. CURA-5491	2018-07-03 13:13:33 +02:00
Jack Ha	c260078631	Remove temperature commands for pause at height for UM3. CURA-5491	2018-07-03 09:40:42 +02:00
Jack Ha	7058ddbb66	Corrected float/int mixups and allow catching temperature before the layers start. CURA-5491	2018-07-02 16:35:49 +02:00
Jack Ha	17c4b65453	Fix pause at height that uses new latest temperature CURA-5491	2018-07-02 15:13:44 +02:00
Ghostkeeper	d4ca3d144e	Use latest temperature instead of a manual resume temperature ... We don't need the user to fill this in. We can just track the resume temperature ourselves. Contributes to issue CURA-5491.	2018-06-21 16:07:29 +02:00
Ghostkeeper	7b82421751	Don't disable E steppers when pausing ... There is no such command to disable only the E stepper drivers. This command M84 gets interpreted as disabling ALL stepper drivers, which on some printers would cause the print bed to fall down.	2018-06-14 14:57:03 +02:00
Diego Prado Gesto	dfd20e1362	CURA-5335 Looking for the actual line number in the gcode when using the filament change script.	2018-06-14 14:35:46 +02:00
ChrisTerBeke	717c11005b	Codestyle changes after merge	2018-05-24 10:58:55 +02:00
ChrisTerBeke	7d0b664c53	Merge pull request #3648 from JPFrancoia/master ... Bug fixes and improvements for PauseAtHeight plugin	2018-05-24 10:56:16 +02:00
JPFrancoia	f15680b9ea	Cleaning dev instructions.	2018-04-26 09:47:49 +01:00
JPFrancoia	a14d594909	- Solve https://github.com/Ultimaker/Cura/issues/3608. ... - Now account for raft layers when choosing "Pause at layer no". - Now positions the nozzle at (X, Y) of the next layer when resuming. - Cleaning code	2018-04-10 16:09:04 +01:00
Ghostkeeper	4226f3641b	Better defaults for filament change ... And better descriptions.	2018-03-21 17:12:54 +01:00
Ghostkeeper	363166bbb7	Merge branch 'post_stretch' of https://github.com/electrocbd/Cura into electrocbd-post_stretch	2018-03-20 16:01:24 +01:00
Ghostkeeper	ecfb62b69e	Rename ColorChange to FilamentChange ... I think this is more clear to the users what this should actually do.	2018-03-07 11:01:00 +01:00
Aleksei S	6df4ad3f6d	Merge branch 'master' of github.com:Ultimaker/cura	2018-02-26 11:51:56 +01:00
Aleksei S	cd0846fad2	PostProcessing plugi, script Pause at Height redo layers ... gives incorrect E-values CURA-4670	2018-02-26 11:49:51 +01:00
Ghostkeeper	6934c3f881	Use self.putValue to write g-code ... Mostly as a test of this function. Seems to work.	2018-02-26 09:54:42 +01:00
Ghostkeeper	d0cc9ba8a6	Remove debugging prints	2018-02-26 09:42:29 +01:00