3125 Commits

Author	SHA1	Message	Date
Ghostkeeper	89b296ef65	Describe the value of the support interface density settings rather than the action ... We use an object form rather than a verb form. Contributes to issue CURA-3491.	2017-04-05 14:06:23 +02:00
Ghostkeeper	945c438c22	Remove support interface resolution settings ... This reverts commit 92d34a8d7293923646224054c2afcfa57504847e, but not entirely because I wanted to retain the new description for support interface resolution itself. Contributes to issue CURA-3491.	2017-04-05 14:02:19 +02:00
Ghostkeeper	d65cc00c69	Rephrase description of enable support bottoms ... It must have a different phrasing than 'support bottom', or else it won't give an actual explanation of what support bottoms are, but 'flooring' was not acceptable. Contributes to issue CURA-3491.	2017-04-05 13:39:03 +02:00
Ghostkeeper	e09dc40dff	Switch descriptions of support top and bottom speed ... Had it wrong way around on what it affects. Contributes to issue CURA-3491.	2017-04-05 13:33:42 +02:00
Ghostkeeper	7915dfa103	Enable support roof/bottom enabled settings when support is active ... Their enabling shouldn't be dependent on the setting they are themselves dependent on. The settings are still effective even if support_interface_enable is off, if they are just overwritten. Contributes to issue CURA-3491.	2017-03-20 10:55:04 +01:00
Ghostkeeper	2f1d957f99	Split support_interface_enable into roof and bottom ... You can activate the roof and bottom separately now. If you want, of course. The original interface setting sets both of them unless overwritten. Contributes to issue CURA-3491.	2017-03-20 10:47:37 +01:00
Ghostkeeper	92d34a8d72	Split support interface resolution into roof and bottom ... You can now tune them separately. Contributes to issue CURA-3491.	2017-03-20 09:40:54 +01:00
Ghostkeeper	3bae49f1d4	Split support interface pattern in two ... You can select a pattern separately for roof and bottom. Contributes to issue CURA-3491.	2017-03-20 09:26:35 +01:00
Ghostkeeper	5d6f2d93dc	Make support angle depend on support roof extruder instead of interface ... It's the roof that matters for the overhang angle. The bottom has no influence. Contributes to issue CURA-3491.	2017-03-20 09:13:57 +01:00
Ghostkeeper	2d9b2216a3	Allow printing support roof and bottom with different extruders ... Note that currently the support_interface_extruder_nr is still used by the engine for some things and therefore the build volume calculations may not be 100% correct. I'll fix that up soon. Contributes to issue CURA-3491.	2017-03-17 15:55:18 +01:00
Ghostkeeper	8de0bd60c7	Split support inerface line width into roof and bottom ... This way you can change them separately. Contributes to issue CURA-3491.	2017-03-17 15:02:44 +01:00
Ghostkeeper	3e464964db	Split support interface density into roof/bottom ... Each has its own line distance setting. The original support interface line distance is no longer used then. Contributes to issue CURA-3491.	2017-03-17 14:47:17 +01:00
Ghostkeeper	cdaeb13c3a	Use support infill density instead of line distance ... Making these profiles use line distance prevents the user from setting their own density. This density is exactly equivalent. Contributes to issue CURA-3491.	2017-03-17 13:29:15 +01:00
Ghostkeeper	933ca70890	Add separate settings for support roof/bottom jerk ... You can now tune them separately. Contributes to issue CURA-3491.	2017-03-17 11:29:33 +01:00
Ghostkeeper	d33c8e8436	Fix spelling of support interface acceleration descriptions ... My own copy-paste mistake here. Contributes to issue CURA-3491.	2017-03-17 11:24:10 +01:00
Ghostkeeper	65daa86fb0	Add separate settings for support roof and bottom acceleration ... You can now tune them separately. Contributes to issue CURA-3491.	2017-03-17 11:14:48 +01:00
Ghostkeeper	250995611a	Fix typo in Support Interface Acceleration ... Contributes to issue CURA-3491.	2017-03-17 11:14:02 +01:00
Ghostkeeper	c15e70a6a6	Make support bottom speed description more accurate ... It doesn't affect overhang really. Contributes to issue CURA-3491.	2017-03-17 11:13:30 +01:00
Ghostkeeper	03ae298389	Add support roof and bottom speeds ... They can now be separately adjusted instead of just support interface. Contributes to issue CURA-3491.	2017-03-17 10:43:01 +01:00
Ghostkeeper	ab3d2e3570	Fix typo in support interface description ... Contributes to issue CURA-3491.	2017-03-17 10:41:27 +01:00
Jaime van Kessel	d52515d57d	Added invert zoom preference option	2017-03-16 19:06:57 +01:00
Jack Ha	ff77571300	Merge branch '2.5'	2017-03-16 16:01:33 +01:00
Jack Ha	aa691033e0	Added Not Supported profiles for incompatible materials. CURA-3510	2017-03-16 16:01:18 +01:00
Jaime van Kessel	a7b5879263	Merge branch '2.5' of github.com:Ultimaker/Cura	2017-03-16 13:18:41 +01:00
Jaime van Kessel	efce0696bd	Recently activated material can no longer be removed ... CURA-3147	2017-03-16 13:11:51 +01:00
Jaime van Kessel	134425db90	Merge branch '2.5' of github.com:Ultimaker/Cura	2017-03-16 11:27:54 +01:00
Jaime van Kessel	1f734d5245	Disabled the start_layers_at_same_position setting	2017-03-16 11:21:08 +01:00
Jaime van Kessel	6da6ae1b9e	start_x and start_y are now settable per extruder	2017-03-16 11:19:44 +01:00
Jaime van Kessel	5bcfba0f17	Revert "removal: remove start_layers_at_same_position; it is now mandatory to start each layer near the given position (CURA-3339)" ... This reverts commit 1482c27b21fb45819d2a400ede937662f34870ed.	2017-03-16 11:16:55 +01:00
Jaime van Kessel	ad7752bb16	Revert "Updated version of superdraft and verydraft. CURA-3479" ... This reverts commit 62de4f9ec6d65c3224c57a9cfcb6b9ec888d6487.	2017-03-16 11:16:02 +01:00
Jaime van Kessel	0c1829af1e	Revert "Upgrade built-in instance containers" ... This reverts commit b162be4df8c12c89112ba558136e87b63e67e713.	2017-03-16 11:15:20 +01:00
Jack Ha	f918a978b2	Fixed extruder per gcode layer. Created show_caution preference for gcode reader. CURA-3390	2017-03-15 14:29:59 +01:00
Jaime van Kessel	6cc0bd893f	Save as now defaults to 3mf ... CURA-3496	2017-03-15 09:57:50 +01:00
Jaime van Kessel	48cba91b16	Merge branch 'master' of github.com:Ultimaker/Cura	2017-03-15 09:27:08 +01:00
Jaime van Kessel	138c3db26f	Preferred mimetype is now used when saving to local or removable drive ... CURA-3496	2017-03-15 09:23:47 +01:00
Ghostkeeper	c52649a91f	Merge branch 'patch-3' of https://github.com/probonopd/Cura into probonopd-patch-3	2017-03-15 09:13:33 +01:00
Jack Ha	132b6aa9d7	Merge branch '2.5'	2017-03-15 09:10:49 +01:00
probonopd	9dbb7fcc15	Update as per discussion in https://github.com/Ultimaker/Cura/pull/1350	2017-03-14 18:31:58 +01:00
jack	284e620da2	Merge pull request #1531 from Ultimaker/feature_version_upgrade_2.5 ... Version Upgrade 2.4 to 2.5	2017-03-14 16:05:43 +01:00
jack	056c9dd362	Merge pull request #1532 from Ultimaker/feature_version_upgrade_2.5_tests ... Version Upgrade 2.4 to 2.5 tests	2017-03-14 16:05:36 +01:00
Jack Ha	62de4f9ec6	Updated version of superdraft and verydraft. CURA-3479	2017-03-14 13:09:07 +01:00
Lipu Fei	97b943736b	Use translation for text in keep/discard profile dialog	2017-03-14 11:59:51 +01:00
Jack Ha	0a398738b7	Merge branch '2.5' into feature_version_upgrade_2.5	2017-03-14 11:18:14 +01:00
Ghostkeeper	9b7f054d32	Merge branch '2.5'	2017-03-13 17:23:59 +01:00
Jack Ha	d7e35fa480	Added global qualities for Superdraft and Verydraft. CURA-3510	2017-03-13 14:32:45 +01:00
Ghostkeeper	cbfbc70fa3	Upgrade built-in instance containers ... These are now upgraded to version 3, meaning that they will have to increase their version numbers and remove any start_layers_at_same_position settings they define. None of these profiles define any start_layers_at_same_position so it's just the version number then. Contributes to issue CURA-3479.	2017-03-13 12:42:25 +01:00
Ghostkeeper	8becc9b119	Merge branch '2.5'	2017-03-13 09:34:47 +01:00
Ghostkeeper	41e3336ea9	Merge branch 'feature_omp_writeGcode' into 2.5	2017-03-13 09:34:37 +01:00
Ghostkeeper	5d0f7f9042	Merge branch '2.5'	2017-03-10 18:20:58 +01:00
Ghostkeeper	137de23221	Always prefer 0.4mm nozzles at initial loading ... Otherwise we might end up with 0.8mm AA cores, and those don't have a normal quality profile so that gives all sorts of trouble.	2017-03-10 18:20:42 +01:00