Paul Kuiper
8a39389186
Rebased on top of Cura 5.9
...
PP-533
2024-10-16 11:22:34 +02:00
wawanbreton
c2c3419502
Applied printer-linter format
2024-10-02 06:57:13 +00:00
Erwan MATHIEU
d1b889b96c
Re-apply disallowed areas and build area fixes
...
CURA-12165
2024-10-02 08:56:18 +02:00
Alan Bjorklund
85c7fede7e
update method extruder start gcode, exclude all generic materials
...
PP-511
2024-10-01 11:49:18 -04:00
wawanbreton
8e5a766193
Applied printer-linter format
2024-10-01 08:49:25 +00:00
Erwan MATHIEU
4f0c77e16a
Fix disallowed areas definition conflict
...
CURA-12165
2024-10-01 10:48:27 +02:00
Alan Bjorklund
523214912b
remove redundant values from Tough PLA 175 quality file, standardize skirt values in method base definition file
...
PP-511
2024-09-27 18:01:03 -04:00
alanbjorklund
557755321f
Applied printer-linter format
2024-09-27 21:12:54 +00:00
alanbjorklund
2532945486
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 17:11:37 -04:00
alanbjorklund
fb95341fd4
Applied printer-linter format
2024-09-27 19:11:05 +00:00
alanbjorklund
e086772f47
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 15:09:45 -04:00
Alan Bjorklund
89066d19e5
removed more redundant values
...
PP-511
2024-09-27 15:05:46 -04:00
Alan Bjorklund
355715474a
Corrected a typo in solid intent files, and removed redundant values from method base definition file
...
PP-511
2024-09-27 14:55:06 -04:00
alanbjorklund
531c85f3c0
Applied printer-linter format
2024-09-27 18:41:46 +00:00
alanbjorklund
9a5e5443e1
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:40:34 -04:00
alanbjorklund
fd29ed6eb7
Applied printer-linter format
2024-09-27 18:39:57 +00:00
alanbjorklund
d0956347ff
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:38:43 -04:00
alanbjorklund
ab44d8781c
Applied printer-linter format
2024-09-27 18:28:51 +00:00
alanbjorklund
077a922a6d
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:27:16 -04:00
alanbjorklund
df5c502bc9
Applied printer-linter format
2024-09-27 18:26:27 +00:00
alanbjorklund
e3f822b0aa
Update resources/definitions/ultimaker_method_base.def.json
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-09-27 14:25:13 -04:00
Alan Bjorklund
35ccd63e29
Method printers: Adding new materials (Tough PLA, PETG, NylonCF, ABS) and updated profiles for 5.9
...
PP-511
2024-09-26 15:35:56 -04:00
HellAholic
ad12851426
Applied printer-linter format
2024-07-31 09:34:34 +00:00
HellAholic
1ac563119e
Add raft_base_thickness dependency
...
For raft_interface_z_offset, raft_interface_line_spacing, and raft_interface_z_offset
2024-07-31 11:32:59 +02:00
HellAholic
4be2d22fa9
Applied printer-linter format
2024-07-31 08:07:45 +00:00
HellAholic
eb80d84da8
comma
2024-07-31 10:06:31 +02:00
HellAholic
1f1f9ee5e7
Apply PPM review
...
raft_base_line_spacing depends on raft_interface_extruder_nr
cool_fan_enabled depends on support_extruder_nr
raft_base_thickness not only depends on raft_interface_extruder_nr but also on support_extruder_nr
2024-07-31 09:58:25 +02:00
HellAholic
c3a74c07b9
Applied printer-linter format
2024-07-30 14:49:28 +00:00
HellAholic
dca373735e
Add other dependencies and update condition
2024-07-30 16:47:59 +02:00
HellAholic
0c09490d36
Applied printer-linter format
2024-07-30 12:28:20 +00:00
HellAholic
6ec660e974
Add removed value during linter to raft_interface_line_width
2024-07-30 14:26:35 +02:00
HellAholic
e2d1381ceb
Applied printer-linter format
2024-07-30 12:20:35 +00:00
HellAholic
3a76f7e0ac
Add force update to method base def
2024-07-30 14:17:18 +02:00
HellAholic
162f9e5f62
Revert "Move the changes to the method base definition"
...
This reverts commit 96b5833035be1a5b856aaf3d74458864f10fa39b.
2024-07-30 14:13:37 +02:00
HellAholic
96b5833035
Move the changes to the method base definition
2024-07-30 14:10:44 +02:00
Paul Kuiper
f4d9dcc840
Changed the support_interface_offset from '=support_offset' to 1 for self support of all Method materials. This value is 0 for the support materials (PVA, SR30, Rapid)
...
PP-504
2024-07-24 18:15:09 +02:00
Paul Kuiper
3800c4b574
* Fix z distance Method PVA from 0.4 to 0 and interface line width from 0.25mm to 0.4mm
...
* Set seam position to sharpest corner + smart hiding (all Ultimaker machines, [not affecting Method machines, was already set to this])
* Enable Use support towers for Method supports materials and all Ultimaker materials, disable for Method model materials.
* Interface support horizontal expansion: 0mm for all Method support materials
PP-504
2024-07-24 11:50:36 +02:00
Remco Burema
a027307743
Revert "* Fix z distance Method PVA from 0.4 to 0 and interface line width from 0.25mm to 0.4mm"
...
This reverts commit bc95ae1009ef3297aea1a6685a39b75e9ba87a75.
2024-07-24 11:44:27 +02:00
Paul Kuiper
bc95ae1009
* Fix z distance Method PVA from 0.4 to 0 and interface line width from 0.25mm to 0.4mm
...
* Set seam position to sharpest corner + smart hiding (all Ultimaker machines, [not affecting Method machines, was already set to this])
* Enable Use support towers for Method supports materials and all Ultimaker materials, disable for Method model materials.
* Interface support horizontal expansion: 0mm for all Method support materials
PP-504
2024-07-24 11:37:35 +02:00
wawanbreton
a215ec4f1a
Applied printer-linter format
2024-07-15 13:12:34 +00:00
Erwan MATHIEU
b6defced68
Remove unnecessarily overridden setting
...
Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
2024-07-15 15:11:19 +02:00
Paul Kuiper
bf594faa1a
Start the Method machines at z=20mm to prevent touching the build plate. Removed formulas containing extruder_nr from the def.json files.
...
PP-502
2024-07-15 15:01:44 +02:00
Paul Kuiper
bb04c3bf4c
Start the Method machines at z=20mm to prevent touching the build plate. Removed formulas containing extruder_nr from the def.json files.
...
PP-502
2024-07-15 14:17:40 +02:00
alanbjorklund
69e6c4eaa0
Applied printer-linter format
2024-07-11 22:33:52 +00:00
Alan Bjorklund
f3fbe9a33b
temperature correction in UM PLA 175
...
PP-502
2024-07-11 18:32:34 -04:00
Paul Kuiper
adc873e619
Remove experimental tag from ASA and SR30.
...
Map mk14_e to LABS extruder.
PP-502
2024-07-11 19:54:18 +02:00
alanbjorklund
452e1dd47c
Applied printer-linter format
2024-07-11 13:37:31 +00:00
Alan Bjorklund
e5f711bcb5
updated based on comments
...
PP-502
2024-07-11 09:36:11 -04:00
Paul Kuiper
41b81730a0
Corrected formulas based on comments Jaime.
...
PP-502
2024-07-11 15:04:32 +02:00
Erwan MATHIEU
66278815fb
Fix formula syntax (and simplify it)
...
CURA-12009
2024-07-11 10:29:18 +02:00
