1443 Commits

Author	SHA1	Message	Date
Jack Ha	8275e506ce	CURA-4606 fix material names for 1.75mm materials	2018-02-16 14:23:11 +01:00
Lipu Fei	73968e5c48	Revert "WIP: Update and fix definition files" ... This reverts commit 27a346a58beaea9de249ebf229f0979d51ad21ff.	2018-02-16 14:23:11 +01:00
Lipu Fei	5ad4447e37	WIP: Update and fix definition files	2018-02-16 14:23:11 +01:00
Lipu Fei	c469ebbf9f	WIP: Fix material lookup problems and update definition files	2018-02-16 14:23:11 +01:00
Lipu Fei	730cbb25bf	WIP: Simplify machine creation	2018-02-16 14:23:11 +01:00
Lipu Fei	8ac9811b41	WIP: Create QualityManager	2018-02-16 14:20:02 +01:00
Diego Prado Gesto	d2ba63147d	Merge branch 'master' into Setting-Optimization	2018-02-16 09:39:30 +01:00
Ian Paschal	4d3f7d098f	Merge pull request #3299 from Ultimaker/feature_circular_prime_tower ... Circular prime tower functionality Looks good Diego!	2018-02-13 16:01:02 +01:00
Ghostkeeper	f91c990fed	Streamline usage of g-code (vs. GCode, Gcode, G-code, gcode, etc.) ... This makes it all the same. It is something that came up in our translation pass this time. Contributes to issue CURA-4883.	2018-02-13 15:50:59 +01:00
Diego Prado Gesto	18ef3cfc69	CURA-4320 Adjust prime tower settings' formulas for calculating values ... and maximum warning.	2018-02-13 13:16:32 +01:00
Diego Prado Gesto	c6328968db	CURA-4320 Add circular prime tower setting and draw shadow according to ... it.	2018-02-12 14:56:26 +01:00
Ghostkeeper	5c89ef1840	Merge branch 'master' of https://github.com/pouncingiguana/Cura	2018-02-12 09:24:44 +01:00
Ian Paschal	276be2342e	CURA-4940 Use aluminum instead of aluminium ... 🇺🇸	2018-02-09 15:07:14 +01:00
THeijmans	b6c48e7fb9	Replaced tabs by spaces ... Thanks Aldo!	2018-02-08 08:58:48 +01:00
THeijmans	34c0a09047	Optimize wall printing order ... This setting will make a lot of more prints more logical in printing order, especially when many small features are printed.	2018-02-07 15:37:05 +01:00
THeijmans	bc0a4cdc17	Initial layer line width increase ... Increasing the initial layer line width both increases print speed, and results in more reliable bed adhesion.	2018-02-07 15:35:09 +01:00
THeijmans	ca83089eff	Combing to "No Skin" ... This will remove the lines "printed" on top of flat top surfaces. For all UM3(e) profiles.	2018-02-07 15:32:59 +01:00
THeijmans	f535ed29ad	Slight meshfix resolution change ... By changing the meshfix resolution from 0.01 to 0.04 mm, we change the minimum out wall line pieces and can have a more continuous printhead movement. Also decreases Gcode size by around 30% for very high detail models.	2018-02-07 15:31:09 +01:00
Ghostkeeper	7bbe42eb42	Remove unnecessary usage of value instead of default ... This is not really a formula.	2018-02-07 13:25:27 +01:00
Lipu Fei	ffa4df6a06	Merge 3.2 into master	2018-02-07 13:20:24 +01:00
Jack Ha	f29d07ce40	CURA-4923 corrected the material diameter of malyan_m200	2018-02-07 11:42:15 +01:00
alekseisasin	6fe524dce8	Merge pull request #3142 from Velleman/master ... Updated definition and added the qualities	2018-02-05 11:56:09 +01:00
Lipu Fei	25713a6e64	Merge remote-tracking branch 'origin/3.2'	2018-02-01 11:23:20 +01:00
Lipu Fei	3927c70625	Fix material_diameter handling in ExtruderStacks ... CURA-4898	2018-01-31 13:32:45 +01:00
Ghostkeeper	c403d52972	Only limit retraction speed if retraction is enabled ... For some printers the feedrate might be too low for the defaults.	2018-01-30 13:44:18 +01:00
Ghostkeeper	4f72f52447	Reduce minimum value for flow to 0.0001% ... CuraEngine can handle that. It's not going to extrude anything, but neither is 5% really. Contributes to issue CURA-4506.	2018-01-24 16:29:24 +01:00
Ghostkeeper	b9fe0046f2	Merge branch 'initial_layer_flow' of https://github.com/BagelOrb/Cura into BagelOrb-initial_layer_flow ... Contributes to issue CURA-4506.	2018-01-24 16:20:48 +01:00
ChrisTerBeke	b41d8eb0dd	Merge branch '3.2'	2018-01-24 13:29:30 +01:00
Lipu Fei	a6f5f8ea68	Revert "Revert "Rename Enable Travel Optimization to Infill Travel Optimization"" ... This reverts commit 3ec4cc6a0ba466df7d454084b51a0becbc3d7d32.	2018-01-23 20:37:24 +01:00
Jack Ha	b0d0b75662	Merge branch '3.2'	2018-01-23 14:25:11 +01:00
Lipu Fei	3ec4cc6a0b	Revert "Rename Enable Travel Optimization to Infill Travel Optimization" ... This reverts commit a31d65786b0c8a0a62c1a3637db914d88bbcc6b4.	2018-01-23 12:38:51 +01:00
Ghostkeeper	f5e40c2281	Merge branch '3.2' ... Contributes to issue CURA-4797.	2018-01-23 11:27:17 +01:00
Ghostkeeper	a31d65786b	Rename Enable Travel Optimization to Infill Travel Optimization ... Because it's now no longer in the Infill category this is unclear.	2018-01-23 11:24:43 +01:00
Ghostkeeper	23bfa798b1	Merge branch '3.2'	2018-01-22 12:51:39 +01:00
Ghostkeeper	3f81347ef8	Add warning that tree support increases slicing time ... It's much slower than the normal support generation.	2018-01-22 12:51:26 +01:00
Ghostkeeper	ec0fca30a4	Merge branch '3.2'	2018-01-22 12:48:54 +01:00
Ghostkeeper	71cea55bda	Move untested settings to experimental category ... These settings are just some of the settings that were not tested by our materials and processing team.	2018-01-22 12:48:29 +01:00
gordo3di	d10ea0a564	Removed desktop.ini files ... Removed desktop.ini files	2018-01-19 11:09:35 -05:00
gordo3di	b48edbab8e	gMax 1.5+ Configurations ... gMax 1.5+ Single and Dual extruder configurations	2018-01-19 10:52:52 -05:00
Ghostkeeper	d1d566bfc0	Merge branch '3.2'	2018-01-18 13:29:36 +01:00
Ghostkeeper	dc08e7f043	Merge branch 'mb-move-wall-order-opt-setting' of https://github.com/smartavionics/Cura into smartavionics-mb-move-wall-order-opt-setting	2018-01-18 13:23:16 +01:00
Brecht Nuyttens	64a7d1bbda	Removed ID + minor change	2018-01-18 08:34:10 +01:00
Lipu Fei	cb0ac9b0c8	Merge pull request #3137 from Ultimaker/feature_multiple_BP ... Feature: Printers with different build plates	2018-01-17 10:55:46 +01:00
Brecht Nuyttens	746fd3ddcb	Updated definition and added qualities ... Updated the definition and added qualities for the 4 filaments.	2018-01-17 10:54:04 +01:00
Lipu Fei	4bc488ca79	Change wording to "Aluminium" ... CURA-4461	2018-01-17 10:50:48 +01:00
Lipu Fei	b0d2ef0f72	Correct default material diameter value for single-extrusion machines ... CURA-4812	2018-01-16 15:04:21 +01:00
Diego Prado Gesto	da4c98b204	Merge branch 'master' into feature_multiple_BP	2018-01-16 09:59:21 +01:00
Ghostkeeper	39aec54a56	Fix reference to Tevo Black Widow model ... Also fix some whitespace mistakes according to code style. Lots of tabs in there, whitespace at the end of a line, brackets on the same line, etc.	2018-01-16 09:28:29 +01:00
Brecht Nuyttens	33ba9a274d	Merge remote-tracking branch 'refs/remotes/Ultimaker/master'	2018-01-15 16:29:21 +01:00
Ghostkeeper	e6cd6c2645	Replace travel_speed with speed_travel ... That travel_speed is a very old setting name. I'm guessing that people were copy-pasting that from older versions of Cura.	2018-01-15 13:57:38 +01:00