Ghostkeeper
4728f31996
Merge branch '2.7'
2017-08-11 12:38:49 +02:00
Ghostkeeper
824849a878
Make manufacturer for base fdm- definitions unknown
...
They are always overwritten, but if it isn't overwritten we don't know the manufacturer for the printer.
Contributes to issue CURA-4159.
2017-08-11 12:38:34 +02:00
Ghostkeeper
76e0156076
Merge branch '2.7'
2017-08-11 11:18:15 +02:00
Ghostkeeper
e1266ceb1f
Change Ultimaker manufacturer to Ultimaker B.V.
...
The material profiles are sent to UM3 with a manufacturer that's obtained from the printer definition rather than the material definition. The printer definition was 'Ultimaker' rather than 'Ultimaker B.V.' and the printer checked against this.
Contributes to issue CURA-4159.
2017-08-11 10:24:13 +02:00
Lipu Fei
0a76e5c38f
Merge branch '2.7'
2017-08-09 16:59:56 +02:00
Lipu Fei
1aba451149
Fix value for outer wall_line_width
...
CURA-4145
2017-08-09 13:52:05 +02:00
Lipu Fei
98b72fb971
Merge branch '2.7'
2017-08-09 13:16:43 +02:00
Ghostkeeper
c0d96a1d79
Remove heat/cool speeds that are equal to default
...
The default value for both of these settings in fdmprinter is 2.
2017-08-09 09:46:22 +02:00
Lipu Fei
7d3ad43c90
Merge pull request #2177 from Ultimaker/raft_smoothing
...
JSOn feat: raft smoothing setting (CURA-3854)
2017-08-09 08:40:34 +02:00
Lipu Fei
63ea940680
Add minimum_value 0 for raft_smoothing
...
CURA-3854
2017-08-09 08:39:10 +02:00
Lipu Fei
33bf758081
Merge pull request #2127 from ChrisRiddell/cr_fix_ironing_settings
...
Keep Ironing settings together while in experimental
2017-08-08 16:54:37 +02:00
Lipu Fei
050caf49b2
Merge branch '2.7'
2017-08-08 16:44:58 +02:00
Lipu Fei
f75871567f
Merge branch 'master' into cr_fix_ironing_settings
2017-08-08 16:43:48 +02:00
Ghostkeeper
919bc6767c
Disable top surface line directions if there is no top surface
2017-08-08 11:40:19 +02:00
alekseisasin
c5cdf2e206
UM3 Initial layer speed is fixed 20
...
CURA-3377
2017-08-03 15:19:17 +02:00
alekseisasin
03c48ac39c
Addded other printer "Kemiq Q2 Gamma & Beta" and material quality
...
CURA-4086
2017-08-03 15:05:45 +02:00
alekseisasin
543fda4656
Merge pull request #2136 from kemiq3d/master
...
Add Kemiq Q2 Beta and Kemiq Q2 Gama definitions, mesh and qualities
2017-08-03 15:04:35 +02:00
alekseisasin
2a5ac4c4da
UM3 Initial layer speed is fixed 20
...
CURA-3377
2017-08-03 09:57:27 +02:00
Ghostkeeper
b43acf5b18
Revert "Revert "Revert "feat: Skin Reference wall settings (CURA-3990)"""
...
This reverts commit 0d4604bb0c4eab56864b87f1b40c1d86b83efae5.
2017-08-02 11:02:14 +02:00
Ghostkeeper
6e97b5003d
Revert "Revert "Revert "better description skin reference wall settings (CURA-3990)"""
...
This reverts commit f39fd47b6c7dc6cc8bd6598cd450505742ff5e01.
2017-08-02 11:02:02 +02:00
Ghostkeeper
8b77465127
Revert "fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)"
...
This reverts commit ce13e84bd03478bf2913eaa7e3ed97a04c8fd3c1.
2017-08-02 11:00:26 +02:00
Tim Kuipers
ce13e84bd0
fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)
2017-08-01 13:53:31 +02:00
Tim Kuipers
f39fd47b6c
Revert "Revert "better description skin reference wall settings (CURA-3990)""
...
This reverts commit 8fc5b2dfee93ed40e200d1680eb36d45177f0af2.
This reimplements the Skin Reference Wall setting
2017-08-01 13:51:41 +02:00
Tim Kuipers
0d4604bb0c
Revert "Revert "feat: Skin Reference wall settings (CURA-3990)""
...
This reverts commit a3a0999df2eb3c9f25a0c63a20737c4c0081b982.
This reimplements Skin Reference Wall
2017-08-01 13:51:12 +02:00
Ghostkeeper
6993160ae5
Merge branch 'mb-group-walls' of https://github.com/smartavionics/Cura into smartavionics-mb-group-walls
2017-08-01 09:44:24 +02:00
Ghostkeeper
f298c29d5f
Disallow retraction/prime speeds of 0
...
This would cause divisions by 0.
2017-07-31 13:40:10 +02:00
Lipu Fei
a3a0999df2
Revert "feat: Skin Reference wall settings (CURA-3990)"
...
This reverts commit 3af089cfa01bacb33245441406edff71c1625014.
2017-07-31 10:20:33 +02:00
Lipu Fei
8fc5b2dfee
Revert "better description skin reference wall settings (CURA-3990)"
...
This reverts commit cbc3daf535e8bf4e1fb0e98376fdff4e8352008a.
2017-07-31 10:20:30 +02:00
Tim Kuipers
2ffeaadc46
JSOn feat: raft smoothing setting (CURA-3854)
2017-07-29 15:19:28 +02:00
Ghostkeeper
b714f0ff3e
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-28 10:48:21 +02:00
Mark Burton
b74e25cb14
Move optimize_wall_printing_order into the experimental category and change the default value to false.
2017-07-27 16:47:07 +01:00
Mark Burton
9fc39a19c9
Merge remote-tracking branch 'upstream/master' into mb-group-walls
2017-07-27 16:43:25 +01:00
Tim Kuipers
d052511be5
rename: Top Surface Infill ==> Top Surface Skin
2017-07-27 17:11:56 +02:00
Tim Kuipers
693cbd2f9f
fix: don't enable Roffing by default
2017-07-27 17:05:02 +02:00
Lipu Fei
ed525478d6
Merge remote-tracking branch 'upstream/skin_reference_wall'
2017-07-27 14:41:07 +02:00
Lipu Fei
85635b3b83
Reword: Roofing -> Top Surface Infill
...
CURA-3940
2017-07-27 09:34:50 +02:00
Ghostkeeper
8a15d4432b
Merge branch 'remove_some_zags'
...
Contributes to issue CURA-3957.
2017-07-26 17:23:27 +02:00
Lipu Fei
2aa8e590bf
Merge pull request #2056 from Ultimaker/top_most_skin_feature
...
Top most skin feature (CURA-3940)
2017-07-26 14:58:08 +02:00
Lipu Fei
506a0a48f4
Reword: roofing -> top surface infill
...
CURA-3940
2017-07-26 14:26:27 +02:00
Lipu Fei
a0e59dd6aa
Add settings for skipping some zags
...
CURA-3957
2017-07-25 08:53:29 +02:00
Ghostkeeper
74feabacd0
Add warning value for initial layer line width
...
150% seems about right. Then you get a warning value for lines thicker than 0.525mm on a 0.4mm nozzle.
2017-07-24 16:19:59 +02:00
Ghostkeeper
06caedbed8
Update PVA profiles with gradual infill settings
...
These profiles are optimised by hand.
2017-07-24 09:09:14 +02:00
Tim Kuipers
cbc3daf535
better description skin reference wall settings (CURA-3990)
2017-07-23 12:35:09 +02:00
Tim Kuipers
3af089cfa0
feat: Skin Reference wall settings (CURA-3990)
2017-07-23 12:34:58 +02:00
Tim Kuipers
2a758c85e7
Merge branch 'master' into top_most_skin_feature
2017-07-21 15:50:50 +02:00
Lipu Fei
d7f3553c90
Brim Line Count should take into account the initial layer line width factor
...
CURA-4027
2017-07-21 14:39:45 +02:00
Ghostkeeper
4bb95eee36
Apply initial layer line width to skirt lines in prime tower position calculation
2017-07-21 12:56:37 +02:00
Ghostkeeper
66c97259c2
Make prime tower automatic formula the default for all FDM printers
...
The Custom FDM Printer had wrong positions by default as well.
2017-07-21 12:56:37 +02:00
Tim Kuipers
d5be43d45d
roofing: inherit from topbottom (CURA-3940)
2017-07-20 15:42:04 +02:00
Tim Kuipers
d25e227707
Merge branch 'master' into top_most_skin_feature
2017-07-20 12:37:48 +02:00
