8860 Commits

Author SHA1 Message Date
Ghostkeeper
a57304b603
Fix typo: Retracation -> Retraction
Contributes to issue CURA-6631.
2019-07-02 17:46:06 +02:00
Ghostkeeper
02b925388a
Merge branch 'updateTiZYX' of https://github.com/TiZYX/Cura into TiZYX-updateTiZYX
Conflicts:
	resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_coarse.inst.cfg -> Deleted in branch, but modified for setting version
	resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_draft.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/abs/tizyx_evy_1.0_abs_extra_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_0.6_petg_draft.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_draft.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/petg/tizyx_evy_1.0_petg_extra_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_0.8_pla_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_1.0_pla_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/quality/tizyx/tizyx_evy/pla/tizyx_evy_1.0_pla_extra_coarse.inst.cfg -> Deleted in branch, but modified for settings version
	resources/variants/tizyx_evy_dual_direct_drive.inst.cfg -> Modified in branch for new settings, in master for settings version
2019-07-02 17:35:07 +02:00
Jaime van Kessel
758a8a0078 Merge branch 'CURA-6583_fix_ortho_side' of github.com:Ultimaker/Cura 2019-07-02 16:50:00 +02:00
Remco Burema
5ea2b0e073 Make stripes closer togheter in striped shader.
part of CURA-6583
2019-07-02 16:49:27 +02:00
Remco Burema
a61e7ea7df Fix striped (off-buildplate) shader for ortho-view.
part of CURA-6583
2019-07-02 16:20:12 +02:00
Jaime van Kessel
e182459dba Fix the updating of material diameter.
This was a weeeird bug. It worked if you changed the value and selected another field.
Pressing enter however (aka; The behavior that 80%+ of the users have) would change it
but it would switch back in half a second. It seems to have been caused by mutliple onEditingFinished
signals being emitted in sequence.
As I can't be bothered to go through the bowels of QML and figure out why exactly this is doing what it's doing,
I just tied the enter to losing the focus, which ensures that the right behavior happens (Field is no longer selected,
and the onEditingFinished is emitted)

Contributes to CURA-6590
2019-07-02 15:16:41 +02:00
Francois Brassart
f924ddcc1c removed old files 2019-07-02 01:15:40 -07:00
Francois Brassart
bc2de879e3 change draft2 and draft3 to coarse and extra coarse. removed layer height in non-global quality profiles 2019-07-01 09:00:39 -07:00
Jaime van Kessel
20357dabb3 Merge branch 'feat_line_spacings' of https://github.com/BagelOrb/Cura 2019-07-01 17:19:26 +02:00
Jaime van Kessel
6544c123a4 Add camera view selector to the view application menu 2019-07-01 11:15:26 +02:00
Francois Brassart
997176eb14 update profiles, qualities, variants... of TiZYX printers 2019-06-28 08:21:59 -07:00
Lipu Fei
67f10d8bc3
Merge pull request #5885 from Ultimaker/CURA-6329_add_crystallinity_setting
Add deprime settings
2019-06-27 16:09:36 +02:00
Ghostkeeper
fe0fcc6eec
Change human-readable names of renamed settings too
Forgot about those.

Contributes to issue CURA-6329.
2019-06-26 16:43:11 +02:00
Ghostkeeper
faf256b2f0
Rename deprime settings with the new name
These have been renamed for greater clarity. We also have to rename them on this side now.

Contributes to issue CURA-6329.
2019-06-26 16:41:51 +02:00
pkuiper-ultimaker
67191c4040
Merge pull request #5863 from Ultimaker/CURA-6414_no_blob_for_one_at_a_time
Don't prime-blob when print-sequence is one-at-a-time. [CURA-6414]
2019-06-25 17:44:51 +02:00
Lipu Fei
934248e218
Merge pull request #5578 from curso007/master
Adding Geeetech A30 & FLSUN QQ-S machine definitons
2019-06-24 13:27:03 +02:00
Lipu Fei
92d029d18f
Update flsun_qq_s.def.json 2019-06-24 13:22:18 +02:00
Lipu Fei
7bd297bef5
Fix setting_version 2019-06-24 13:21:04 +02:00
Lipu Fei
544e7a1614
Rename Geeetech_A30.def.json to geeetech_a30.def.json 2019-06-24 13:20:04 +02:00
Lipu Fei
6a7da56057
geeetech_a30.def.json
Fix geeetech_a30.def.json
2019-06-24 13:19:24 +02:00
Ghostkeeper
6273d34eae
Merge branch 'master' of https://github.com/Robokinetics/Cura into Robokinetics-master 2019-06-21 11:33:07 +02:00
Робокинетика
f5d94b9646
Fixed the value of "retraction_amount" 2019-06-21 11:53:06 +03:00
Diego Prado Gesto
efa42ccbd1 Merge branch 'master' into CURA-6329_add_crystallinity_setting 2019-06-20 14:06:18 +02:00
Remco Burema
9845178d26 Remove superfluous bracket (causing 'EOF'). [CURA-6460] 2019-06-20 09:44:19 +02:00
Ghostkeeper
15997685df
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master 2019-06-20 09:18:16 +02:00
Ghostkeeper
adc6f79c9c
Merge branch 'master' into CURA-6329_add_crystallinity_setting 2019-06-18 15:50:48 +02:00
pkuiper-ultimaker
6a65045587
Merge pull request #5862 from Ultimaker/CURA-6460_remove_square_tower
Remove square prime tower. [CURA-6460]
2019-06-18 11:49:43 +02:00
Ghostkeeper
487673e780
Always uncheck zoom to mouse if preference is disabled 2019-06-18 11:19:41 +02:00
Ghostkeeper
7f559987a0
Disable move to mouse position preference in orthogonal view 2019-06-18 11:16:21 +02:00
maukcc
c2ad542e21 HMS434 update
start gcode
exruder gcode
2019-06-18 10:56:04 +02:00
pkuiper-ultimaker
9236f21d67
Merge pull request #5888 from Ultimaker/rename_minimum_diameter
Rename Minimum Diameter to Maximum Tower-Supported Diameter
2019-06-17 15:39:44 +02:00
Lipu Fei
1d85e60a6b Merge remote-tracking branch 'origin/master' into CURA-6460_remove_square_tower 2019-06-17 13:11:07 +02:00
Ghostkeeper
edcf905870
Merge branch 'master' of https://github.com/Robokinetics/Cura into Robokinetics-master 2019-06-17 09:38:12 +02:00
Робокинетика
c96777cb9e
Indentation fixes
All tabs are replaced by 4 spaces
2019-06-16 19:38:20 +03:00
Робокинетика
f95bac436e
Update erzay3d.def.json 2019-06-16 19:33:30 +03:00
Ghostkeeper
0190247c5a
Don't show tooltip if it shows the same text as the button
It's only useful if the text on the button gets elided.
2019-06-14 14:17:10 +02:00
Ghostkeeper
a39ac2ca22
Reduce travel jerk/acceleration and reduce print jerk slightly
These settings are preventing layer shifts on the Tevo Tornado according to our users at #5694.
2019-06-14 11:50:58 +02:00
Remco Burema
fd8dfb4185 Fix resolve/value/warning definition for enable prime blob. [CURA-6414] 2019-06-14 11:39:48 +02:00
Ghostkeeper
a89465afa1
Build volume temperature should not be settable per extruder
Just like build plate temperature, the per-extruder profiles can still override it but it will be resolved to a single global value.
2019-06-14 11:38:18 +02:00
Ghostkeeper
52ed79805e
Enable numerous settings that just work fine with tree support
Found via a report in #5453.
2019-06-14 09:51:27 +02:00
Remco Burema
1ae8011cf7 Clarify crystalline description (crystal clear?). [CURA-6329] 2019-06-12 14:02:37 +02:00
Ghostkeeper
cf9f97e897
Merge branch 'rename_minimum_diameter' into CURA-6460_remove_square_tower
Conflicts:
	plugins/VersionUpgrade/VersionUpgrade41to42/VersionUpgrade41to42.py -> Both had a version upgrade implementation.
	plugins/VersionUpgrade/VersionUpgrade41to42/__init__.py -> Both had a version upgrade implementation.
2019-06-12 13:03:05 +02:00
Ghostkeeper
b5a59d19ff
Set acceleration to 500 for Tevo Tornado
The users of this printer in #5702 found this to be a better value to prevent layer shifting. Fixes #5702.
2019-06-12 10:38:54 +02:00
Ghostkeeper
9bcf1cd761
Reduce Tevo Tornado's jerk to 10 by default
This prevents layer shifts, according to the users in #5702.
2019-06-12 10:35:37 +02:00
Ghostkeeper
a38984dcec
Increment setting_version to 8
This is required for the version upgrade.

Contributes to issue CURA-6311.
2019-06-12 09:09:41 +02:00
Ghostkeeper
f897e31e96
Rename key of support_minimal_diameter to support_tower_maximum_supported_diameter
A bit long, but you won't have to type it that often.

Contributes to issue CURA-6311.
2019-06-11 17:43:16 +02:00
Diego Prado Gesto
de5de8b9f1 Merge branch 'master' of github.com:Ultimaker/Cura 2019-06-11 09:54:14 +02:00
Diego Prado Gesto
b90fb9f810 Make the layer and path slider a bit longer 2019-06-11 09:53:37 +02:00
Ghostkeeper
abda45ee59
Set crystalline to false by default
Because PLA is not crystalline.

Contributes to issue CURA-6329.
2019-06-07 16:26:19 +02:00
Ghostkeeper
27ea9c813e
Allow negative retraction distances
You COULD want to extrude.

Contributes to issue CURA-6329.
2019-06-07 13:57:56 +02:00