1450 Commits

Author	SHA1	Message	Date
Ghostkeeper	b54d709f96	Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master	2018-02-27 10:25:11 +01:00
Ghostkeeper	cde67ab84c	Add warning for low Retraction Min Travel ... Because if you set it to be too close to the line width, you'll get retractions between every skin line.	2018-02-26 14:48:43 +01:00
Ghostkeeper	fc9b2c3529	Limit infill zigzaggify setting to infill extruder ... Let's give it the same properties as the infill pattern setting. Contributes to issue CURA-4017.	2018-02-22 16:44:39 +01:00
Ghostkeeper	dba748bd8a	Add new setting for zig-zaggifying support ... You can now also use the zigzag type patterns for support. Contributes to issue CURA-4017.	2018-02-22 16:43:50 +01:00
Ghostkeeper	6110b83844	Use 'or' instead of '||' for Python code ... Oops. Contributes to issue CURA-4017.	2018-02-21 09:51:14 +01:00
Ghostkeeper	f3aeb01af0	Only enable Connect Infill Lines by default for Cross ... We don't want to change the default behaviour yet. Contributes to issue CURA-4017.	2018-02-21 08:50:49 +01:00
Ghostkeeper	31ad0dd56c	Allow zig-zaggifying infill for patterns other than Cross as well ... It is now supported for any linear-based infill except zigzag (which has its own algorithm; that's a TODO). Contributes to issue CURA-4017.	2018-02-21 08:50:49 +01:00
maukcc	c323bac306	extruder change update ... extruder change update: - wiping nozzles - temperature updates	2018-02-20 17:15:21 +01:00
Diego Prado Gesto	f27685e6ac	CURA-4017 Enable the setting zig_zagiffy_infill for the grid and triangular patterns	2018-02-20 13:56:30 +01:00
Mark	9af6b4d6f6	Merge pull request #3264 from uBuild-3D/patch-1 ... Create ubuild-3d_mr_bot_280.def.json	2018-02-19 13:19:12 +01:00
Mark	2b70c83894	Merge pull request #3216 from dagoma3d/dagoma-profiles ... Enhance Dagoma profiles	2018-02-19 12:12:23 +01:00
Diego Prado Gesto	d2ba63147d	Merge branch 'master' into Setting-Optimization	2018-02-16 09:39:30 +01:00
Ian Paschal	4d3f7d098f	Merge pull request #3299 from Ultimaker/feature_circular_prime_tower ... Circular prime tower functionality Looks good Diego!	2018-02-13 16:01:02 +01:00
Ghostkeeper	f91c990fed	Streamline usage of g-code (vs. GCode, Gcode, G-code, gcode, etc.) ... This makes it all the same. It is something that came up in our translation pass this time. Contributes to issue CURA-4883.	2018-02-13 15:50:59 +01:00
Diego Prado Gesto	18ef3cfc69	CURA-4320 Adjust prime tower settings' formulas for calculating values ... and maximum warning.	2018-02-13 13:16:32 +01:00
Diego Prado Gesto	c6328968db	CURA-4320 Add circular prime tower setting and draw shadow according to ... it.	2018-02-12 14:56:26 +01:00
Ghostkeeper	5c89ef1840	Merge branch 'master' of https://github.com/pouncingiguana/Cura	2018-02-12 09:24:44 +01:00
Ian Paschal	276be2342e	CURA-4940 Use aluminum instead of aluminium ... 🇺🇸	2018-02-09 15:07:14 +01:00
uBuild-3D	1b17aee88f	Create ubuild-3d_mr_bot_280.def.json ... Machine definition of MrBot280 3D printer by www.ubuild-3d.com Thanks	2018-02-08 19:30:14 +02:00
THeijmans	b6c48e7fb9	Replaced tabs by spaces ... Thanks Aldo!	2018-02-08 08:58:48 +01:00
THeijmans	34c0a09047	Optimize wall printing order ... This setting will make a lot of more prints more logical in printing order, especially when many small features are printed.	2018-02-07 15:37:05 +01:00
THeijmans	bc0a4cdc17	Initial layer line width increase ... Increasing the initial layer line width both increases print speed, and results in more reliable bed adhesion.	2018-02-07 15:35:09 +01:00
THeijmans	ca83089eff	Combing to "No Skin" ... This will remove the lines "printed" on top of flat top surfaces. For all UM3(e) profiles.	2018-02-07 15:32:59 +01:00
THeijmans	f535ed29ad	Slight meshfix resolution change ... By changing the meshfix resolution from 0.01 to 0.04 mm, we change the minimum out wall line pieces and can have a more continuous printhead movement. Also decreases Gcode size by around 30% for very high detail models.	2018-02-07 15:31:09 +01:00
Ghostkeeper	7bbe42eb42	Remove unnecessary usage of value instead of default ... This is not really a formula.	2018-02-07 13:25:27 +01:00
Lipu Fei	ffa4df6a06	Merge 3.2 into master	2018-02-07 13:20:24 +01:00
Jack Ha	f29d07ce40	CURA-4923 corrected the material diameter of malyan_m200	2018-02-07 11:42:15 +01:00
alekseisasin	6fe524dce8	Merge pull request #3142 from Velleman/master ... Updated definition and added the qualities	2018-02-05 11:56:09 +01:00
Lipu Fei	25713a6e64	Merge remote-tracking branch 'origin/3.2'	2018-02-01 11:23:20 +01:00
Orel	f9a0b1db50	Enhance Dagoma DiscoEasy200 profile and add Dagoma Neva stuff (profile and mesh).	2018-02-01 09:40:43 +01:00
Lipu Fei	3927c70625	Fix material_diameter handling in ExtruderStacks ... CURA-4898	2018-01-31 13:32:45 +01:00
Ghostkeeper	c403d52972	Only limit retraction speed if retraction is enabled ... For some printers the feedrate might be too low for the defaults.	2018-01-30 13:44:18 +01:00
Ghostkeeper	4f72f52447	Reduce minimum value for flow to 0.0001% ... CuraEngine can handle that. It's not going to extrude anything, but neither is 5% really. Contributes to issue CURA-4506.	2018-01-24 16:29:24 +01:00
Ghostkeeper	b9fe0046f2	Merge branch 'initial_layer_flow' of https://github.com/BagelOrb/Cura into BagelOrb-initial_layer_flow ... Contributes to issue CURA-4506.	2018-01-24 16:20:48 +01:00
ChrisTerBeke	b41d8eb0dd	Merge branch '3.2'	2018-01-24 13:29:30 +01:00
Lipu Fei	a6f5f8ea68	Revert "Revert "Rename Enable Travel Optimization to Infill Travel Optimization"" ... This reverts commit 3ec4cc6a0ba466df7d454084b51a0becbc3d7d32.	2018-01-23 20:37:24 +01:00
Jack Ha	b0d0b75662	Merge branch '3.2'	2018-01-23 14:25:11 +01:00
Lipu Fei	3ec4cc6a0b	Revert "Rename Enable Travel Optimization to Infill Travel Optimization" ... This reverts commit a31d65786b0c8a0a62c1a3637db914d88bbcc6b4.	2018-01-23 12:38:51 +01:00
Ghostkeeper	f5e40c2281	Merge branch '3.2' ... Contributes to issue CURA-4797.	2018-01-23 11:27:17 +01:00
Ghostkeeper	a31d65786b	Rename Enable Travel Optimization to Infill Travel Optimization ... Because it's now no longer in the Infill category this is unclear.	2018-01-23 11:24:43 +01:00
Ghostkeeper	23bfa798b1	Merge branch '3.2'	2018-01-22 12:51:39 +01:00
Ghostkeeper	3f81347ef8	Add warning that tree support increases slicing time ... It's much slower than the normal support generation.	2018-01-22 12:51:26 +01:00
Ghostkeeper	ec0fca30a4	Merge branch '3.2'	2018-01-22 12:48:54 +01:00
Ghostkeeper	71cea55bda	Move untested settings to experimental category ... These settings are just some of the settings that were not tested by our materials and processing team.	2018-01-22 12:48:29 +01:00
gordo3di	d10ea0a564	Removed desktop.ini files ... Removed desktop.ini files	2018-01-19 11:09:35 -05:00
gordo3di	b48edbab8e	gMax 1.5+ Configurations ... gMax 1.5+ Single and Dual extruder configurations	2018-01-19 10:52:52 -05:00
Ghostkeeper	d1d566bfc0	Merge branch '3.2'	2018-01-18 13:29:36 +01:00
Ghostkeeper	dc08e7f043	Merge branch 'mb-move-wall-order-opt-setting' of https://github.com/smartavionics/Cura into smartavionics-mb-move-wall-order-opt-setting	2018-01-18 13:23:16 +01:00
Brecht Nuyttens	64a7d1bbda	Removed ID + minor change	2018-01-18 08:34:10 +01:00
Lipu Fei	cb0ac9b0c8	Merge pull request #3137 from Ultimaker/feature_multiple_BP ... Feature: Printers with different build plates	2018-01-17 10:55:46 +01:00