Jaime van Kessel
afd7f5507d
Merge pull request #12394 from Ultimaker/PP-15-enable-skin-edge-support
...
PP-15-enable-skin-edge-support
2022-06-02 17:06:53 +02:00
Jaime van Kessel
952da63230
Merge pull request #12415 from Ultimaker/PP-170-clean-up-retraction_count_max
...
Pp 170 clean up retraction limits
2022-06-02 17:05:57 +02:00
Rijk van Manen
3a7341f761
Disable travel acceleration/jerk
...
This slightly improves visual quality (mainly the seam) and reduces gcodes per second. PP-9
2022-06-02 17:02:22 +02:00
Rijk van Manen
a970e455d4
Merge branch 'main' into PP-15-enable-skin-edge-support
2022-06-02 17:01:29 +02:00
Jaime van Kessel
95e078a3a9
Merge pull request #12356 from p3d-dev/main
...
deletion of duplicated json entries
2022-06-02 15:54:26 +02:00
Jaime van Kessel
b42a06fddd
Merge pull request #12418 from Ultimaker/PP-172-dont-avoid-supports
...
PP-172 disable travel_avoid_supports
2022-06-02 15:50:47 +02:00
Jaime van Kessel
2d1abf79a8
Merge pull request #12416 from Ultimaker/PP-46-print-infill-before-walls
...
revert PP-37
2022-06-02 15:48:44 +02:00
Jaime van Kessel
65e4b0e0d7
Merge pull request #12412 from Ultimaker/PP-19_also_increase_jerk_for_support
...
PP-19 - Also increase jerk for support
2022-06-02 15:48:12 +02:00
Jaime van Kessel
9fc3357818
Merge pull request #12398 from Ultimaker/PP-93-enable-top-surface-skin-layers
...
reduce top/bottom flow by enabling top surface skin layers
2022-06-02 15:45:53 +02:00
p.kuiper
977b81da7f
Removed duplicate entry bridge fan speed 3.
...
Relates to PP-19
2022-06-02 09:48:46 +02:00
p.kuiper
fec4888989
Clean up of jerk settings. Moved the jerk setting up to ultimaker.def.json. Removed duplicate entries in quality profiles and removed a number of strange jerk entries in the quality profiles.
...
Relates to PP-19
2022-06-02 09:04:13 +02:00
Rijk van Manen
8f2dff712e
disable travel_avoid_supports
...
While CURA-9337 is not implemented this a mitigation to avoid unnecessary combing. PP-172
2022-06-01 15:43:12 +02:00
Rijk van Manen
877f8ca1cf
revert PP-37
...
PP-37 is not needed anymore because of PP-27. This solves the problem of PP-46 as well. For more details see PP-46
2022-06-01 15:38:30 +02:00
Rijk van Manen
3a2a58f546
remove setting, follow the default
...
PP-170
2022-06-01 15:16:23 +02:00
Rijk van Manen
14355aa904
default retraction limit settings
...
most ultimaker profiles use this setting as a default. PP-170
2022-06-01 15:10:34 +02:00
p.kuiper
20efe02d8b
Also changed the jerk setting for support material to 20mm/s to prevent flow ringing in the support material and increase productivity.
...
Relates to PP-19
2022-06-01 13:54:00 +02:00
Rijk van Manen
d352bbbbc5
reduce support interface flow
...
The reasoning of PP-86 also holds for the support interface layers, however we forgot about support when we implemented PP-86. When doing PP-108 we found this improvement.
2022-05-30 14:05:47 +02:00
Rijk van Manen
7c2b84184b
reduce top/bottom flow by enabling top surface skin layers
...
PP-93
2022-05-30 14:00:16 +02:00
Rijk van Manen
e543416deb
enable skin edge support
...
For all ultimaker printers AND low infill density the skin edge support feature is used. PP-15
2022-05-30 11:00:58 +02:00
Rijk van Manen
02fb4e70d3
this if else statement is doing nothing
2022-05-30 10:58:56 +02:00
p.kuiper
0db75501a3
Merge remote-tracking branch 'origin/main' into PP-3_improved_experimental_bridge_settings
...
# Conflicts:
# resources/definitions/ultimaker.def.json
2022-05-30 07:59:50 +02:00
p3d-dev
9aa7e9a006
remove duplicated machine_heated_bed
2022-05-26 00:19:40 +02:00
p3d-dev
ec3aafb859
remove duplicated machine_heated_bed
2022-05-26 00:18:18 +02:00
p3d-dev
46cf1f3a1d
remove duplicated machine_heated_bed
2022-05-26 00:16:14 +02:00
Jaime van Kessel
f130eb2e7c
Merge pull request #11623 from cbc02009/fix-voron-retraction
...
fix retraction speed and amount for direct drive afterburner.
2022-05-20 16:54:01 +02:00
Jaime van Kessel
c41c59da13
Merge pull request #12188 from Ultimaker/CURA-8708_remove_travel_acceleration_jerk
...
Add setting to no longer use different jerk/acc for travels
2022-05-18 16:32:50 +02:00
Ghostkeeper
fc4585e098
Merge branch '5.0'
...
Conflicts:
plugins/Marketplace/resources/qml/PackageCardHeader.qml -> An improvement for future translations was made at the same time as a change to the label here.
2022-05-16 15:11:39 +02:00
Ghostkeeper
acc8b511d0
Add setting to no longer use different jerk/acc for travels
...
Enabling this adds more control, possibly improving the productivity of the printer by allowing higher acceleration and jerk rates during travel moves where they have less of an impact.
Disabling this reduces the size of the g-code and the CPU requirements of the printer.
Contributes to issue CURA-8708.
2022-05-13 14:17:12 +02:00
Remco Burema
2f357cc6e5
Add brackets for increased readability.
...
I had to try out what this actually did, fortunately, the result was the same as the without brackets version in all cases, otherwise we'd have a pretty weird problem.
relates to PP-168 and in 5.0 becasue of CURA-9293
2022-05-13 13:11:00 +02:00
p.kuiper
843bdcfb46
After more research it was observered that this change decreased the print quality of normal prints and only improved the quality in the spiral mode. Therefore the higher deviation settings is only enabled for the in spiralize mode.
...
Relates to PP-168
2022-05-13 13:01:09 +02:00
p.kuiper
439df31028
This setting change results in a reduction of the bufferunderrun blobs that were observered when switching from Cura 4.13 to 5.0. Increasing the deviation results in less small segments and reduces the segments per second. Stijn Antz observered that the blob artefacts disappeared when applying this change.
...
Relates to PP-168
2022-05-13 13:00:57 +02:00
Ghostkeeper
9a5a99da46
Merge branch 'patch-1' of https://github.com/xDazld/Cura into xDazld-patch-1
2022-05-12 12:38:12 +02:00
Remco Burema
ec5e22846e
Merge pull request #11278 from Eryone/master
...
Add eryone_thinker_directdrive profile
2022-05-06 19:12:00 +02:00
Remco Burema
75a87005b2
Merge pull request #11255 from Toylerrr/master
...
Elegoo Neptune 2 Printer Configuration
2022-05-06 18:49:30 +02:00
Ghostkeeper
ae9b0e11bb
Merge branch 'master' of https://github.com/wanders78746/Cura into wanders78746-master
2022-05-04 16:39:39 +02:00
Ghostkeeper
0993e486f1
Fix JSON syntax error
...
JSON doesn't support the extra comma at the end there. It's marked as a syntax error.
Contributes to issue CURA-9226.
2022-04-29 10:01:23 +02:00
Ghostkeeper
f82660a630
Merge branch 'master' of https://github.com/MatiGabaglio/Cura into MatiGabaglio-master
2022-04-29 09:54:16 +02:00
Casper Lamboo
c4748ba332
Merge branch 'master' into PP-129_increase-filter-distance
2022-04-07 13:54:27 +02:00
Casper Lamboo
00fcd9d006
Merge pull request #11725 from Ultimaker/feat_transition_filter_limit
...
Feat/Fix: transition filter limit
2022-04-07 13:52:29 +02:00
j.delarago
b7ad18d149
Merge branch 'master' into PP-54_decrease-resolution
...
# Conflicts:
# resources/definitions/ultimaker.def.json
# resources/quality/ultimaker_s3/um_s3_aa0.8_CPE_Superdraft_Print.inst.cfg
# resources/quality/ultimaker_s3/um_s3_aa0.8_PETG_Superdraft_Print.inst.cfg
# resources/quality/ultimaker_s5/um_s5_aa0.8_CPE_Superdraft_Print.inst.cfg
# resources/quality/ultimaker_s5/um_s5_aa0.8_PETG_Superdraft_Print.inst.cfg
2022-04-07 11:14:30 +02:00
Jaime van Kessel
706c32706b
Merge pull request #11767 from Ultimaker/PP-115_improve-default-linewidths
...
Pp 115 improve default linewidths
2022-04-07 11:09:55 +02:00
Jaime van Kessel
0cb5a147ed
Merge pull request #11776 from Ultimaker/PP-154_adjust_horizontal_expansion
...
Reduced horizontal expansion offset to the theoretically correct valu…
2022-04-07 10:49:39 +02:00
p.kuiper
e24d2d15ae
Reduced horizontal expansion offset to the theoretically correct value of 0.1*layer_height if the correction is performed on both sides of the wall (then totals 0.2*layer_height).
...
Relates to PP-154
2022-04-06 13:56:28 +02:00
p.kuiper
0a8ef5162e
Removed the rather hacky implementation of the shrinkage factor averaging. Issues with dual extrusion were the second extruder is not used should solved in a different way.
...
Relates to PP-77
2022-04-06 13:28:55 +02:00
Tim Kuipers
8098c20860
disable wall_transition_filter_distance
...
We don't want to filter based on the length of the filtered region, but based on the induced extra line width variation.
This diables the setting for the frontend, but doesn't fully remove it yet. TODO
2022-04-05 14:00:42 +02:00
Tim Kuipers
de29eb7d53
change name to transitionING filter
...
This is not a property of a transition, but of when the transitioning algorithm makes or leaves out transitions
2022-04-05 13:59:01 +02:00
Tim Kuipers
d3e0b04eed
update filter margin name and description
2022-04-05 13:57:56 +02:00
Rijk van Manen
04d5d43372
remove redundant overwrites
...
PP-115
2022-04-04 16:10:06 +02:00
Rijk van Manen
7884ba4d5b
update minimum linewidth
...
since these settings are new to cura, I think it is safe to update them in fdmprinters. PP-115
2022-04-04 16:09:48 +02:00
Rijk van Manen
44a33e0fed
follow the defaults set in ultimaker.def.json
...
Only UM2+C keeps his on resolution settings, since this printer has a lower segments per second performance, and we are not going to work on it. PP-54
2022-04-04 14:29:40 +02:00
