* Create s3d_std1.0_ABS_D.inst.cfg
* Create s3d_std1.0_ABS_E.inst.cfg
* Create s3d_std1.0_ABS_F.inst.cfg
* Create s3d_std1.0_ASA-X_D.inst.cfg
* Publication des profiles betas 1mm et 1.2mm
J'ai mis les fichiers quality à la bonne setting version pour Cura, j'ai mis l'indication Beta sur les labels de profiles.
* Update s3d_std1.0_ASA-X_E.inst.cfg
Tes
* Update s3d_std1.0_ASA-X_E.inst.cfg
* Correction 'No New Line'
* Update s3d_std1.0_ABS_D.inst.cfg
* Incrementation à setting version 16
* Update s3d_std1.0_ABS_D.inst.cfg
* Ajout Profiles COPA B04, B06 et B08
* Ajout Profiles PLA HR870 B0.4, B0.6 et B0.8
* Modification of profiles for 1.0mm and 1.2mm nozzles
-Renaming the variants to include 'Experimental' in the title
* Modification of Variants files for 1.0mm and 1.2mm nozzles
* Update s3d_std0.6_PLA_HT_C.inst.cfg
* Addition of profiles for polycarbonate for 0.4, 0.6 and 0.8mm nozzles
* Delete rename.sh
Remove rename.sh
* Changes: ASA-X points to ASA-X
Co-authored-by: AButler31 <alexander@emotion-tech.com>
Removes custom settings in the machine definition files. These were used to set custom values for the maximum print temperature, maximum retraction speed and distance based on the tool which is used (PTFE or full metal hot end). Thus all variants are also updated. This is done based on feedback of a pull request.
The commit adds:
- Machine definition files for the Layer One Atom 3 and Atom 3 Lite Printer
- One shared extruder definition file for the Atom 3 and the Atom 3 Lite
- A mesh file for the Atom 3 and Atom 3 Lite
- Variant files for [0.2; 0.4; 0.6]mm Nozzles for PTFE and full metal hotends
* Added BIQU machine base files as well as BIQU B1 machine files.
* Fixed a variants settings version error.
* Updated base def by removing excluded materials and changing the pref to pla175
* Fixed the machine name value which should only take a default value and not also a value.
* Increased the max extruder feedrate to allow the default retraction speed.
* Removed comments from the quality profiles. Removed author from variants. Adjusted materials in quality profiles to refer to the 175 profiles directly.
* Enabled coasting by default in the B1 profile and increased the width of infill for the base profile.
* Updated all quality and variants configs to use settings version 16 in anticipation of release 4.8
* Final tweaks to B1 start gcode
* Added an ABL version of the B1 with tweaked start codes.
* Add Creality CR-6 SE definition
Also did a few changes in the creality base.
* Add Creality CR-6 SE Nozzle variants
* Update creality_base.def.json
Reverted back to the 4.7 base file
* Update creality_cr6se.def.json
* Update creality_cr6se_0.8.inst.cfg
* Update creality_cr6se_0.6.inst.cfg
Updated to version 16
* Updated to version 16
* Updated to version 16
* Update to version 16
* Update to version 16
* Update to version 16
A printer was added in the meantime that had setting_version = 15, which was leading to failing
tests, considering that this PR has changed the setting version to 16.
CURA-7118
We have a change now that requires a version upgrade. This triggers all profiles to update for the user, and we must update accordingly in the built-in profiles.
Contributes to issue CURA-7118.
The settings for the Ultimaker 3 and Ultimaker 3 Extended should remain the same. The two share their quality profiles and intent profiles, but not their nozzle profiles so this must be copied.
To compensate elephant foot -> initial layer horizontal expansion setting is modeified for engineering and AA0.25 core profile for UMS5 and for UM3 for AA0.4 and AA0.25 cores.
Due to a merge conflict that Git couldn't detect, these are immediately outdated. Let's update them to 15.
Since I knew this would be coming, I didn't change the maximum deviation last time, so now I also don't need to change it back.
Contributes to issue CURA-7384.
