fieldOfView
4dea518c72
Add Upgraded Parts action for UM2 to add support for Olsson block
...
This adds a set of variants that just set the nozzle diameter and nozzle tip diameter. These variants are not used until the machine action sets the has_variants metadata entry.
2017-04-30 12:38:46 +02:00
MaukCC
dff23b0e82
Update cartesio_0.8.inst.cfg
2017-04-24 11:06:34 +02:00
Ghostkeeper
d6f49d4c12
Merge branch '2.5'
2017-04-14 15:04:05 +02:00
Ghostkeeper
72c0295c81
Set nozzle tip diameter for 0.8mm cores
...
They have a outer diameter of 2mm.
Contributes to issue CURA-3650.
2017-04-14 14:58:23 +02:00
Jaime van Kessel
c087f4b0dc
Merge branch 'master' of git://github.com/maukcc/cura
2017-04-14 14:30:25 +02:00
Ghostkeeper
cb8796711d
Merge branch '2.5'
2017-04-13 18:21:35 +02:00
Ghostkeeper
e49316d1b9
Set nozzle switch prime speed in AA 0.8mm profiles to 20
...
Some of them ended up as 15 because that's the default in the Ultimaker 3. This was done correctly by the profile optimiser because this setting was not specified by the original profiles, but it should've been 20 for all AA 0.8mm profiles.
Contributes to issue CURA-3650.
2017-04-13 18:21:17 +02:00
Ghostkeeper
f35124400b
Merge branch '2.5'
2017-04-13 09:50:27 +02:00
Ghostkeeper
907d064684
Copy 0.8mm variants of UM3 to UM3E
...
They share the same profiles. They should also have the same settings in the variants, but this is not automatically shared for some reason.
Contributes to issue CURA-3650.
2017-04-13 09:05:56 +02:00
Ghostkeeper
6d266d2da6
Merge branch '2.5'
2017-04-12 17:32:40 +02:00
Ghostkeeper
53476b62bc
Re-add nozzle size for 0.8mm variants
...
Arguably the most important one. This is omitted from the original profiles so the original script assumed it had a nozzle size of 0.4mm.
Contributes to issue CURA-3650.
2017-04-12 16:33:25 +02:00
Ghostkeeper
febd1f0f79
Make sure that the UM3 definition is taken into account when optimising
...
Otherwise it acts as if the settings were the defaults for FDMPrinter rather than defaulting to the current UM3 settings.
Contributes to issue CURA-3650.
2017-04-12 16:29:36 +02:00
Ghostkeeper
397c2666f0
Optimise profiles for 0.8mm cores
...
Sample testing confirms that these are equal to their originals. Nylon, PLA and PVA were already optimised, but ABS and CPE weren't. Now all are optimised except some 0.4mm core profiles. I'll see to those next. Note that the filament flow compensation setting is still wrong in these profiles (it was wrong in the original profiles as well).
Contributes to issue CURA-3650.
2017-04-12 15:38:07 +02:00
MaukCC
f6799d64b7
Update cartesio_0.25.inst.cfg
2017-04-12 15:04:39 +02:00
MaukCC
2bcbd7415e
Update cartesio_0.4.inst.cfg
2017-04-12 15:04:15 +02:00
MaukCC
383c62218d
Update cartesio_0.8.inst.cfg
2017-04-12 15:03:59 +02:00
MaukCC
f35a4bf276
Update cartesio_0.4.inst.cfg
2017-04-12 13:15:09 +02:00
MaukCC
f019d05422
Update cartesio_0.25.inst.cfg
2017-04-12 13:13:24 +02:00
MaukCC
10dbd7e683
Update cartesio_0.8.inst.cfg
2017-04-12 13:12:55 +02:00
MaukCC
1f4bc708ca
Update cartesio_0.25.inst.cfg
2017-04-12 10:33:44 +02:00
MaukCC
952fce4eda
Update cartesio_0.4.inst.cfg
2017-04-12 10:33:24 +02:00
MaukCC
5069dfbf65
Update cartesio_0.8.inst.cfg
2017-04-12 10:32:54 +02:00
Ghostkeeper
5a39ed6793
Merge branch 'maukcc-master'
2017-04-07 10:09:53 +02:00
MaukCC
e5d6fbcf1e
Update cartesio_0.25.inst.cfg
2017-04-06 14:04:58 +02:00
MaukCC
66b5a1d0bc
Update cartesio_0.8.inst.cfg
2017-04-06 14:04:39 +02:00
MaukCC
f54e671ede
Update cartesio_0.4.inst.cfg
2017-04-06 14:04:07 +02:00
MaukCC
575256227c
Update cartesio_0.4.inst.cfg
2017-04-05 16:19:06 +02:00
MaukCC
2c12e5e4d9
Update cartesio_0.25.inst.cfg
2017-04-05 16:17:42 +02:00
MaukCC
6bc76f7b8c
Update cartesio_0.4.inst.cfg
2017-04-05 16:16:03 +02:00
MaukCC
0f5bcb57e0
Update cartesio_0.25.inst.cfg
2017-04-05 16:12:29 +02:00
MaukCC
eee382b1d8
Update cartesio_0.25.inst.cfg
2017-04-05 16:09:28 +02:00
MaukCC
cb943cba98
Update cartesio_0.4.inst.cfg
2017-04-05 16:07:13 +02:00
Jaime van Kessel
d5382c7924
Merge branch 'revise_jellybox_support' of git://github.com/IMADE3D/cura
2017-04-04 13:28:53 +02:00
MaukCC
4fb3513a7e
Update cartesio_0.25.inst.cfg
2017-03-30 10:29:08 +02:00
MaukCC
c09c044210
Update cartesio_0.4.inst.cfg
2017-03-30 10:27:46 +02:00
MaukCC
05cbd4ad7b
Update cartesio_0.4.inst.cfg
2017-03-30 10:26:13 +02:00
MaukCC
13d11b6cbc
Update cartesio_0.4.inst.cfg
2017-03-30 10:25:34 +02:00
MaukCC
a3be68eb3c
Update cartesio_0.8.inst.cfg
2017-03-30 10:24:33 +02:00
MaukCC
9abb721981
Update cartesio_0.8.inst.cfg
2017-03-30 10:23:51 +02:00
MaukCC
b154a40e54
Update cartesio_0.4.inst.cfg
2017-03-30 10:23:24 +02:00
MaukCC
2c58fd9ac6
Update cartesio_0.25.inst.cfg
2017-03-30 10:22:54 +02:00
MaukCC
4f1641f7b7
Update cartesio_0.8.inst.cfg
2017-03-29 16:36:24 +02:00
MaukCC
731da24788
Update cartesio_0.4.inst.cfg
2017-03-29 16:35:47 +02:00
MaukCC
7bc83a55cd
Update cartesio_0.8.inst.cfg
2017-03-29 16:23:03 +02:00
MaukCC
d8ba5d71ee
Update cartesio_0.4.inst.cfg
2017-03-29 16:22:25 +02:00
MaukCC
21c607c88b
Update cartesio_0.25.inst.cfg
2017-03-29 16:22:07 +02:00
MaukCC
242fa53668
Update cartesio_0.8.inst.cfg
2017-03-29 16:21:14 +02:00
MaukCC
454ce53957
Update cartesio_0.4.inst.cfg
2017-03-29 16:19:54 +02:00
Ghostkeeper
6eeb61c6ff
Merge branch 'maukcc-master'
2017-03-29 13:26:14 +02:00
Ghostkeeper
23a09f7f3c
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2017-03-29 13:25:34 +02:00
