Lipu Fei
9f5a1b3695
Merge pull request #1564 from nallath/usb_fixes
...
Usb fixes
2017-04-04 12:05:49 +02:00
Lipu Fei
7315a09c7d
Use layer_id to determine total layer count
...
CURA-3615
2017-04-04 11:45:30 +02:00
Lipu Fei
5de3a614ea
Merge pull request #1578 from fieldOfView/fix_savitar_gracefull_degradation
...
Fail gracefully when libSavitar is not found
2017-04-03 12:53:35 +02:00
fieldOfView
fd09a1959b
Simplify margins and make them DPI aware
2017-04-02 15:54:06 +02:00
fieldOfView
ed8954c1db
Replace font.pixelSize with DPI-aware font.pointSize
...
This also uses the same pointSize as eg the PreferencesPage.qml uses
2017-04-02 15:31:35 +02:00
fieldOfView
2e1dd46ea4
Replace hardcoded color with system-theme color
2017-04-02 14:38:11 +02:00
fieldOfView
d536bbd6b9
Fix Hi DPI issues with Workspace and Profile Changes dialogs
2017-04-02 12:38:41 +02:00
Lipu Fei
c5bf107be6
Merge branch '2.5'
2017-03-31 12:12:29 +02:00
Lipu Fei
08071c3aa5
Fix batched GCode compression
...
CURA-3604
2017-03-31 12:11:11 +02:00
Jaime van Kessel
f5590a98ed
Added missing close for USB programmer. Thanks to legoabram for the fix
2017-03-30 21:35:26 +02:00
Jaime van Kessel
f82aecb7ca
Refactoring; no longer use "Printer" to identify CuraApplication
2017-03-30 20:19:05 +02:00
Lipu Fei
74e9ee0ab7
Fix batched gcode compression for "print over network"
...
CURA-3604
2017-03-30 19:00:41 +02:00
Jaime van Kessel
dbfa5873ce
Merge branch '2.5' of github.com:Ultimaker/Cura
2017-03-30 17:03:01 +02:00
Jaime van Kessel
06fff748e3
Decreased the size of the batches to send, as it froze the interface too much.
2017-03-30 16:59:35 +02:00
Jaime van Kessel
7ae8d96775
Simply reset the authentication when requesting a new one.
...
Only changing the state caused a whole lot of issues.
2017-03-30 16:47:08 +02:00
Jack Ha
3135dc7d77
Solved MC
2017-03-30 16:20:08 +02:00
Lipu Fei
bfd77f915d
Compress gcode lines in batch
...
CURA-3604
2017-03-30 16:09:17 +02:00
Lipu Fei
c785e84b86
Check len(materialLengths) before using
...
CURA-3604
2017-03-30 16:09:16 +02:00
Lipu Fei
ef666aac88
Set gcode_list for Scene after loading gcode
...
CURA-3604
2017-03-30 16:09:16 +02:00
Lipu Fei
2158826e06
Change backend state to disabled after reading a gcode
...
CURA-3604
2017-03-30 16:09:16 +02:00
fieldOfView
adf2ac10b0
Fix check for succesfully imported 3MFReader & 3MFWriter modules
2017-03-30 13:56:19 +02:00
Jaime van Kessel
f7bbb243b8
Moved authentication request state change
2017-03-30 11:02:56 +02:00
Jack Ha
0655771cb8
Removed comment. CURA-3390
2017-03-29 11:00:59 +02:00
Jack Ha
d5d265a996
Resolve mc cherry-picking CURA-3390
2017-03-29 11:00:54 +02:00
Jack Ha
02bb575ced
Fixed extruder per gcode layer. Created show_caution preference for gcode reader. CURA-3390
2017-03-29 10:56:36 +02:00
Jack Ha
1e75c84662
Less yields for G-code reader and faster. CURA-3390
2017-03-29 10:56:28 +02:00
Jack Ha
ea0c55fff1
Solved merge conflict in cherry-pick CURA-3390
2017-03-29 10:56:26 +02:00
Jack Ha
fb2c318a0a
Added caution message for g-code reader. CURA-3390
2017-03-29 10:53:25 +02:00
Jaime van Kessel
fbc372812c
Minor refactor to improve readability
...
CURA-3390
2017-03-29 10:51:56 +02:00
Ghostkeeper
f62488fd11
Catch JSONDecodeErrors on decoding messages from the network
...
The network can corrupt packages or the printer can only send partial messages. Cura shouldn't break on that. It's just a warning. This warning says more than the original stack trace does, because the stack trace only said like 'unexpected comma there and there' while this message actually says what message contained the error.
2017-03-29 10:34:27 +02:00
Jaime van Kessel
38a07d75c7
Merge branch 'master' of github.com:Ultimaker/Cura
2017-03-28 13:16:00 +02:00
Jaime van Kessel
db1fb8e692
Moved authentication request state change
2017-03-28 13:14:47 +02:00
Tim Kuipers
7a67ab4e66
Merge branch '2.5'
2017-03-28 12:55:18 +02:00
Jaime van Kessel
910ff7acea
No longer check printer state when no material lengths are known
...
This fixes issues with g-code from g-code reader not having material lengths set.
CURA-3604
2017-03-28 11:59:07 +02:00
fieldOfView
2b761b87ac
Fail gracefully when libSavitar is not found
...
By catching the ImportError, this prevents the logs being clogged with exceptions in start and when the plugins preference page is touched.
2017-03-25 09:56:02 +01:00
Jaime van Kessel
f04d1efb8d
Removed file progress from removable output device, as writefile job now handles that itself
2017-03-24 16:32:39 +01:00
Jaime van Kessel
4b7b8600ec
Shortened the logging of the auth key. Turned out it was extremely long
2017-03-24 11:22:57 +01:00
Jaime van Kessel
8d2e824205
Added even more logging
2017-03-24 11:17:59 +01:00
Jaime van Kessel
adab4a1110
Added "blurred" auth key logging.
...
The getSafeaAuthKey prints a key of the same length, but only the last 5 chars are real. The rest is blurred out with *
THis is a bit like how most payment services hide your credit card number.
2017-03-24 11:04:08 +01:00
Jaime van Kessel
e30e2a8018
Instead of not sending the line at all, just send a get temp command
2017-03-23 20:13:13 +01:00
Jaime van Kessel
645e3e8dfe
Don't try to send empty g-code lines
2017-03-23 19:42:52 +01:00
Jaime van Kessel
6ff130c361
Added logging
2017-03-23 17:57:52 +01:00
Jaime van Kessel
8023341090
Merge branch '2.5' of github.com:Ultimaker/Cura
2017-03-23 15:15:08 +01:00
Lipu Fei
96e9780273
Fix typo in changelog 2.5.0
2017-03-23 08:53:57 +01:00
Lipu Fei
e35d276e25
Complete Changelog for 2.5.0
...
CURA-3467
2017-03-22 15:20:57 +01:00
Jack Ha
4eff58995d
Merge branch '2.5'
2017-03-22 13:24:32 +01:00
Lipu Fei
c6df3adddb
Update 2.5.0 BETA ChangeLog
...
CURA-3467
2017-03-22 10:26:01 +01:00
Jack Ha
aa79ca1d30
Layer view menu items now have Cura colors, not the system colors.
2017-03-20 15:49:27 +01:00
Jack Ha
6858db5e17
Merge branch '2.5'
2017-03-20 15:17:29 +01:00
Jack Ha
b8d8e4fac3
Updated changelog. CURA-3467
2017-03-20 15:17:18 +01:00
