Mark Burton
d0922e9007
Removed trailing .
2017-07-29 09:32:55 +01:00
Mark Burton
02d8f259e2
Add z_offset_layer_0 and z_offset_taper_layers settings.
2017-07-29 09:19:47 +01:00
Ghostkeeper
b714f0ff3e
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-28 10:48:21 +02:00
Tim Kuipers
d052511be5
rename: Top Surface Infill ==> Top Surface Skin
2017-07-27 17:11:56 +02:00
Tim Kuipers
693cbd2f9f
fix: don't enable Roffing by default
2017-07-27 17:05:02 +02:00
Lipu Fei
ed525478d6
Merge remote-tracking branch 'upstream/skin_reference_wall'
2017-07-27 14:41:07 +02:00
Lipu Fei
85635b3b83
Reword: Roofing -> Top Surface Infill
...
CURA-3940
2017-07-27 09:34:50 +02:00
Ghostkeeper
8a15d4432b
Merge branch 'remove_some_zags'
...
Contributes to issue CURA-3957.
2017-07-26 17:23:27 +02:00
Lipu Fei
2aa8e590bf
Merge pull request #2056 from Ultimaker/top_most_skin_feature
...
Top most skin feature (CURA-3940)
2017-07-26 14:58:08 +02:00
Lipu Fei
506a0a48f4
Reword: roofing -> top surface infill
...
CURA-3940
2017-07-26 14:26:27 +02:00
Lipu Fei
a0e59dd6aa
Add settings for skipping some zags
...
CURA-3957
2017-07-25 08:53:29 +02:00
Ghostkeeper
74feabacd0
Add warning value for initial layer line width
...
150% seems about right. Then you get a warning value for lines thicker than 0.525mm on a 0.4mm nozzle.
2017-07-24 16:19:59 +02:00
Ghostkeeper
06caedbed8
Update PVA profiles with gradual infill settings
...
These profiles are optimised by hand.
2017-07-24 09:09:14 +02:00
Tim Kuipers
cbc3daf535
better description skin reference wall settings (CURA-3990)
2017-07-23 12:35:09 +02:00
Tim Kuipers
3af089cfa0
feat: Skin Reference wall settings (CURA-3990)
2017-07-23 12:34:58 +02:00
Tim Kuipers
2a758c85e7
Merge branch 'master' into top_most_skin_feature
2017-07-21 15:50:50 +02:00
Lipu Fei
d7f3553c90
Brim Line Count should take into account the initial layer line width factor
...
CURA-4027
2017-07-21 14:39:45 +02:00
Ghostkeeper
4bb95eee36
Apply initial layer line width to skirt lines in prime tower position calculation
2017-07-21 12:56:37 +02:00
Ghostkeeper
66c97259c2
Make prime tower automatic formula the default for all FDM printers
...
The Custom FDM Printer had wrong positions by default as well.
2017-07-21 12:56:37 +02:00
Tim Kuipers
d5be43d45d
roofing: inherit from topbottom (CURA-3940)
2017-07-20 15:42:04 +02:00
Tim Kuipers
d25e227707
Merge branch 'master' into top_most_skin_feature
2017-07-20 12:37:48 +02:00
Ghostkeeper
500211941a
Fix spelling of 'Volumatric'
...
Contributes to issue CURA-3998.
2017-07-18 13:10:16 +02:00
Tim Kuipers
83f6dec28d
rename roofing settings: topmost_skin => roofing (CURA-3940)
2017-07-17 15:51:36 +02:00
Tim Kuipers
141543d7ca
don't enable roofing by default (CURA-3940)
2017-07-17 15:32:57 +02:00
Tim Kuipers
26ac70d2bd
feat: topmost_skin_angles (CURA-3940)
2017-07-17 15:16:11 +02:00
Tim Kuipers
9dcb2c918e
fix: disable topmost skin settings if there is no top skin (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
7b56ba41b1
fix: topmost_skin_extruder_nr enabled function (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
89cafc867e
cleanup: remove superfluous value equal to default_value (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
c91d11fde3
fix: make ironing inherit from topmost_skin rather than top_bottom (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
4754fd51ad
feat: topmost skin: Roofing settings (CURA-3940)
2017-07-17 14:46:24 +02:00
Tim Kuipers
6fc824abd5
fix: make line width factor layer 0 an extruder setting (CURA-4027)
2017-07-17 14:46:00 +02:00
Ghostkeeper
7f1dfcf433
Move prime tower more left
...
Otherwise it intersects with one of the clips on some profiles.
2017-07-14 15:57:08 +02:00
Ghostkeeper
19d9f37bc5
Also subtract support horizontal expansion from prime tower Y position
...
*&@#
2017-07-14 13:43:05 +02:00
Ghostkeeper
8da2ae55cd
Improve prime tower position formula again
...
Basically the entire implementation of BuildVolume.py is in here by now... It's a bit more conservative than BuildVolume but I couldn't find a case where this fails (again).
2017-07-14 13:04:00 +02:00
Jaime van Kessel
dee09e15ae
Added 101hero platform, based on pull request from rmcolbert
...
CURA-4046
2017-07-14 12:59:39 +02:00
Lipu Fei
9b9093cfab
Merge pull request #2105 from maukcc/cura/master
...
Cartesio extruders start positions
2017-07-13 12:43:35 +02:00
Ghostkeeper
5ad4c58055
Take travel avoid distance into account with prime tower position
...
Otherwise you can't print if platform adhesion is off.
2017-07-13 12:42:58 +02:00
Ghostkeeper
a84a2922b6
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-13 09:05:55 +02:00
Lipu Fei
6cae413766
Treat initial_layer_line_width_factor as a percentage instead of factor
...
CURA-4036
initial_layer_line_width_factor is a percentage ranging from 0 to 100,
so when calculating the prime tower position, we need to divide it by
100.
2017-07-13 08:58:41 +02:00
Lipu Fei
bcd93522a2
Use bool instead of str for default_value of fill_outline_gaps
...
CURA-4023
2017-07-13 08:44:44 +02:00
maukcc
50d3ba9fbe
Cartesio extruders start positions
...
Cartesio extruders start and end positions added
2017-07-12 13:43:54 +02:00
Ghostkeeper
7de501ac87
Update description of initial layer line width
...
It now does apply to bed adhesion features.
Contributes to issue CURA-4027.
2017-07-11 16:32:31 +02:00
Ghostkeeper
a04cb7524d
Remove nonsensical global nozzle offsets for Dagoma DiscoEasy200
...
It doesn't make sense to always have a nozzle offset for all nozzles. What's more, the setting only exists in fdmextruder.def.json so it can't be set in something that inherits from fdmprinter.def.json.
2017-07-11 14:47:10 +02:00
Ghostkeeper
a04e389b7f
Fix machine_nozzle_head_polygon
...
The min/max values were long ago replaced by a proper polygon.
2017-07-11 14:43:26 +02:00
Ghostkeeper
0bf0e13adc
Fix unknown setting machine_nozzle_gantry_distance
...
It has been renamed to gantry_height long ago.
2017-07-11 14:39:50 +02:00
Ghostkeeper
41103cfca0
Make machine_nozzle_head_distance settable per extruder
...
It won't have an effect on the actual g-code since the engine still requests it from the global stack, but at least the warnings in the log go away.
2017-07-11 14:37:22 +02:00
Ghostkeeper
4c966a1834
Fix inheritance formula for prime tower position
...
It now takes the values it depends on from the correct extruder and applies the first layer line width.
2017-07-11 14:09:44 +02:00
Arjen Hiemstra
458c9ac540
Remove two unnecessary resolveOrValue calls
...
Contributes to CURA-3521
2017-07-11 12:03:23 +02:00
14bitVoid
a08d11769d
Merge branch 'master' into first_layer_line_width
2017-07-11 01:39:14 +02:00
Ghostkeeper
ee52e1b9ea
Reposition prime tower automatically
...
This actually looks really nice. It just moves right along that border there. Eventually we could also auto-position the X position but for now this is fine.
2017-07-10 14:21:40 +02:00
