GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-05-29 01:28:55 +08:00
Code Issues Packages Projects Releases Wiki Activity
24,528 Commits 294 Branches 267 Tags
Commit Graph

138 Commits

Author SHA1 Message Date
Ghostkeeper
765004cd68
Take node groups into account when computing the centre of the mesh group 
These groups were not considered because they are not sliceable. Their children are sliceable, so I could just use a DepthFirstIterator. However their group computes the AABB correctly also, so taking the AABB of the group is more efficient.

Contributes to issue CURA-7118.
 2020-09-08 17:54:09 +02:00
Ghostkeeper
d3e5f9ec93
Don't re-scale convex hulls for groups 
The convex hulls for groups are already constructed from the convex hull of the convex hulls of all of their children. Since the children's convex hulls are already scaled, we don't want to scale it again for the group.

Contributes to issue CURA-7118.
 2020-09-08 17:45:38 +02:00
Ghostkeeper
59bf1c10af
Account for the fact that global_stack may be empty 
You should not have any models in your scene then though. But oh well. It also fixes the typing.

Contributes to issue CURA-7118.
 2020-09-02 03:21:11 +02:00
Ghostkeeper
323be4deff
Fix updating the 2D convex hull 
This comes at some performance cost, sadly. This is necessary because the convex hull of every node may change if the transformation of any other node changes, since that transformation may adjust the total bounding box of the mesh group.

Contributes to issue CURA-7118.
 2020-09-02 03:09:41 +02:00
Ghostkeeper
f613a54b79
Compute centre of current mesh group 
This is either the centre of the bounding box around all printable nodes in the scene, or the centre of the bounding box of the most-ancestral node that is not yet the scene root itself in one-at-a-time mode.

Contributes to issue CURA-7118.
 2020-09-02 02:43:43 +02:00
Ghostkeeper
bc0ac0f2a0
Only scale convex hull if there is a non-1 scaling factor 
This will save some processing power for the very common case where there is no scaling factor.

Contributes to issue CURA-7118.
 2020-09-02 02:10:19 +02:00
Ghostkeeper
a6707217c7
Get scale factor from global stack 
This is the one that's actually used by CuraEngine. If I get it per-object, the material profile overrides it.

Contributes to issue CURA-7118.
 2020-09-02 02:08:18 +02:00
Ghostkeeper
af03bc8f24
Adjust collision area based on shrinkage compensation ratio 
So now if the model is grown due to shrinkage compensation, its collision area will also grow. This prevents objects adjacent to each other from hitting each other.

Contributes to issue CURA-7118.
 2020-09-02 00:51:58 +02:00
Jaime van Kessel
ccd9a17be4
Remove normals for ConvexHullNode 
They are rendered flat, so no need to store the normals

CURA-7106
 2020-06-30 13:22:45 +02:00
Jaime van Kessel
03e66beafd
Re-use some render batches 
This prevents us from having to re-create them everytime

CURA-7106
 2020-06-23 17:12:47 +02:00
Jaime van Kessel
b0ed47daf1
Don't copy transformations if it's not needed 
CURA=7106
 2020-06-23 16:24:34 +02:00
Jaime van Kessel
d897299b31
Simplify recomputeConvexHull code 
CURA-7106
 2020-06-23 12:55:13 +02:00
Jaime van Kessel
1900b0841a
Use cheaper convexhull function when not using raft 
CURA-7106
 2020-06-23 12:03:15 +02:00
Jaime van Kessel
f00e3f7363
Remove useless code 
CURA-7106
 2020-06-23 09:21:24 +02:00
Jaime van Kessel
570efc8310
Remove unneeded checks in convex hull node 
CURA-7106
 2020-06-22 17:18:22 +02:00
Ghostkeeper
f8a88642c2
Don't crash when failing to create Toolbox.qml dialogue 
Basically we should never be raising the master Exception class, really.
The enclosing class has error handling in case this returns None already, so this fix is easy.

Contributes to Sentry issue CURA-Y5.
 2020-06-18 14:53:18 +02:00
fieldOfView
c34162a2ba Merge branch 'master' into feature_support_meshes_present 
# Conflicts:
#	cura/Scene/CuraSceneController.py
#	cura/Scene/CuraSceneNode.py
 2020-06-04 10:27:11 +02:00
Ghostkeeper
0e4830e6ef
Don't use deprecated extruders property 
Done during Turbo Testing and Tooling.
 2020-05-29 18:10:59 +02:00
Nino van Hooff
89f0970a88 Remove trailing whitespace from Python files 2020-05-29 14:30:33 +02:00
Nino van Hooff
58ffc9dcae Merge remote-tracking branch 'origin/master' into doxygen_to_restructuredtext_comments 
# Conflicts:
#	cura/API/__init__.py
#	cura/Settings/CuraContainerRegistry.py
#	cura/Settings/ExtruderManager.py
#	plugins/PostProcessingPlugin/scripts/PauseAtHeight.py
#	plugins/UM3NetworkPrinting/src/Cloud/CloudApiClient.py
#	plugins/UM3NetworkPrinting/src/Cloud/ToolPathUploader.py
#	plugins/UM3NetworkPrinting/src/Network/LocalClusterOutputDeviceManager.py
 2020-05-28 17:31:24 +02:00
Nino van Hooff
c2c96faf5f Convert remaining doxygen to rst 2020-05-28 17:13:44 +02:00
Ghostkeeper
edf7fdad75
Check first if we have valid vertex data 
The convex hull calculation may fail. If it does, we want to just tomit the convex hull shadow, rather than crash.

Fixes Sentry issue CURA-ST.
 2020-05-25 17:20:39 +02:00
fieldOfView
d00ec619f5 Remove unused imports 2020-03-22 18:58:16 +01:00
fieldOfView
138dbddb10 Restore the SettingDefinition relations without killing a puppy 2020-03-22 18:51:43 +01:00
fieldOfView
6e09e9821f Show support settings when support meshes are present in the scene 2020-03-22 18:23:32 +01:00
Jaime van Kessel
27c6cb4c1e
Prevent max recursion for convex hull calculation 
fixes CURA-3W
 2020-02-28 16:31:28 +01:00
Jaime van Kessel
e74f049142
Fix bunch of issues found by pylint 2020-01-10 16:37:46 +01:00
Jaime van Kessel
81b33b8649
Add some missing typing 2020-01-10 14:58:53 +01:00
Jaime van Kessel
5da77472e7
Add some timers to sceneChanged 2020-01-03 10:17:54 +01:00
Jaime van Kessel
1b80ec8fff
Fix incorrect casing 
Minor issue and I didn't want to send it back to todo *again* because of it.

CURA-6522
 2019-12-10 13:14:54 +01:00
Nino van Hooff
f4c68f4e71 Fix two mypy warnings 
CURA-6522
 2019-12-06 11:47:07 +01:00
Nino van Hooff
2d8a415a69 Use the printing area (hull + adhesion for one-at-a-time) instead of 
convex hull for build volume collision detection. The convex hull is
not suitable for this purpose because for one-at-a-time it includes the
machine head polygon, which should be allowed to travel outside the
build volume

CURA-6522
 2019-12-06 11:08:55 +01:00
Nino van Hooff
fc060f7724 Do not show any object shadows in all_at_once mode. 
Also DRYed up the one_at_a_time check

CURA-6522
 2019-12-04 15:33:31 +01:00
Jaime van Kessel
50d72692d8
Merge branch 'master' of github.com:Ultimaker/Cura into CURA-6522_one_at_a_time_overlapping_build_area 2019-11-20 16:48:00 +01:00
Nino van Hooff
558ed4b1e8 Change shadows on buildplate for one-at-a-time printing 
Inner: adhesion area
Outer: full head

In my opinion this allows the user to more easily see whether this
object can be printed after another object.
 2019-11-12 12:56:07 +01:00
Lipu Fei
896b73f8b3 Fix typing 2019-11-11 08:57:34 +01:00
Jaime van Kessel
4f569194ec
Add extra typing 2019-11-08 17:36:50 +01:00
Jaime van Kessel
463822f10f
Fix some typing issues 2019-11-08 16:50:23 +01:00
Nino van Hooff
b6fc8523f3 refactor ConvexHullDecorator.getConvexHull 
CURA-6522
 2019-10-31 16:40:32 +01:00
Nino van Hooff
6971e1f9cf Add clarifying documentation to getConvexHull 
CURA-6522
 2019-10-31 15:01:24 +01:00
Jaime van Kessel
5ec6b2fdf7
Fix typing 
CURA-6785
 2019-10-02 15:48:10 +02:00
Nino van Hooff
9512030060 Check for adhesion area collisions in one-at-a-time ordering 
CURA-6785
 2019-10-02 13:09:37 +02:00
Nino van Hooff
c4c62cbba2 Take nozzle offset into account in _getHeadAndFans() 
CURA-6785
 2019-09-27 15:26:46 +02:00
Lipu Fei
946b2b943e F5 reloads gcode file 
CURA-6643
 2019-08-27 14:42:31 +02:00
Jaime van Kessel
28184ad999 Add some simple tests to CuraSceneNode 2019-07-19 16:53:37 +02:00
Jaime van Kessel
6bb9e6097a Rename "collideWithArea" to "collideWithAreas" 
This better reflects what it does (eg; it is checking for multiple colissions, not just one)
 2019-07-19 16:23:57 +02:00
Jaime van Kessel
a6ca49d68c Fix typing for Buildvolume 2019-06-07 13:34:57 +02:00
Lipu Fei
c2b866fd05 Fix scale for just ungrouped objects 
CURA-6565

Same as in Uranium _calculateAABB()
 2019-06-05 13:29:45 +02:00
Jaime van Kessel
f7d0bcd0d4 Prevent modifier meshes from blocking one at a time slicing 
CURA-6030
 2019-05-20 14:40:41 +02:00
Jaime van Kessel
eb690a459f Fix boundingbox calculation of grouped groups 
Previously this would cause a crash because the bounding box of the outermost
group would not take the bounding boxes of it's children's children into acocunt.

CURA-6501
 2019-05-06 11:40:47 +02:00