Ghostkeeper
5c2c4118c6
Add clarification about that supported overhang doesn't fall into this category
...
Fixes #6436 .
2019-09-30 12:58:36 +02:00
Ghostkeeper
3c17af6192
Clarify description of support interface area settings
...
They'll be generated and then tossed away. I'm specifying that there will be normal support in its place, unlike the minimum support area setting that replaces the support with air. It won't be air here, but normal support.
2019-09-29 18:25:11 +02:00
Walt Sorensen
827f84bd6a
Set BIBO print speed to 40mm/s
...
BIBO and members from the BIBO group on Facebook say this printer should be run at 40-45mm/s and not the FDMprinter default of 60mm/s. BIBO provided test gcode files also show that they are setting 40mm/s in the slicer to create their test files.
This change sets the print speed override so the printer profile does not start at the FDMPrinter print speed default of 60mm/s but at the reccommended value of 40mm/s
2019-09-26 19:26:10 -06:00
Ghostkeeper
0161a1eca5
Fix dual extrusion for Magna Dual
...
Contributes to issue CURA-6813.
2019-09-26 11:14:01 +02:00
Ghostkeeper
541bd3811e
Fix whitespace
...
Contributes to issue CURA-6813.
2019-09-26 10:33:44 +02:00
Ghostkeeper
d670ec7266
Merge branch 'master' of https://github.com/F-Fischer/Cura into F-Fischer-master
2019-09-26 10:30:16 +02:00
F-Fischer
8b321bc398
Pull Request Requested changes
2019-09-25 13:52:42 -03:00
Ghostkeeper
23cc73a78f
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2019-09-25 11:53:44 +02:00
Ghostkeeper
0c873d1757
Fix inheritance of support interface line direction settings
...
Fixes #6412 .
2019-09-25 11:42:34 +02:00
Ghostkeeper
9f1b434a7e
Don't show support brim width if support brim is disabled
2019-09-25 11:15:21 +02:00
maukcc
31a78975ec
HMS434 update and material exclusion
2019-09-25 10:23:20 +02:00
Lipu Fei
bd314a765f
Update setting_version
...
CURA-6799
2019-09-24 11:19:03 +02:00
Lipu Fei
a6218179a9
Merge pull request #6329 from maukcc/master
...
HMS434 change
2019-09-24 11:04:50 +02:00
maukcc
184116995c
HMS434 outside wall
2019-09-23 16:35:41 +02:00
maukcc
250402142a
HMS434 add ironing
2019-09-20 09:33:41 +02:00
maukcc
a1d8fd8743
HMS434 quality deleted
...
HMS434 quality deleted in favor of .package types
2019-09-19 15:35:58 +02:00
Ghostkeeper
fd452e74b3
Merge branch 'mb-fix-small-feature-blurb-spello' of https://github.com/smartavionics/Cura into smartavionics-mb-fix-small-feature-blurb-spello
2019-09-17 13:15:57 +02:00
Ghostkeeper
d0b7a52ef5
Remove unused definition ID field
2019-09-17 13:10:25 +02:00
F-Fischer
3606ac8bd6
Hellbot printers definitions added
2019-09-16 16:23:35 -03:00
Daniel Green
57a50c9c3d
Correction for build volume.
2019-09-15 09:56:21 -07:00
Mark Burton
fb5ec97cb8
Fix spelling.
2019-09-14 20:19:52 +01:00
maukcc
d514b324fb
HMS434 update
...
HMS434 update on material and quality profiles
2019-09-13 11:38:42 +02:00
Jaime van Kessel
a6a106b526
Merge branch 'feature/creality-machines' of https://github.com/trouch/Cura
2019-09-12 14:09:46 +02:00
HUNIBEST
67aa37b13d
Add Cubicon plus A15 and A30
...
Add Cubicon devices profile
- Style Plus-A15
- Dual Pro-A30
CURA-6771
2019-09-12 14:05:13 +02:00
Jaime van Kessel
5e4f673ec2
Merge branch '4.3' of github.com:Ultimaker/Cura
2019-09-11 16:10:12 +02:00
Jaime van Kessel
ab910c2a37
Disable retraction min travel
...
It's broken right now, so we should enable it again once it's fixed
CURA-6675
2019-09-11 15:12:49 +02:00
maukcc
c5224a5b91
HMS434 update
...
getting rid of materials
setting quality as material based
added build volume
changed travel speeds
2019-09-10 12:43:51 +02:00
Ghostkeeper
f561218346
Merge branch '4.3'
2019-09-09 17:37:12 +02:00
Ghostkeeper
8c817e041e
Reduce size of print head without fans for one-at-a-time mode
...
This allows you to place models more compactly.
According to the discussion at #5590 , this was tested to work well.
Fixes #5590 .
2019-09-09 17:37:01 +02:00
Ghostkeeper
a43de19113
Reduce size of print head without fans for one-at-a-time mode
...
This allows you to place models more compactly.
According to the discussion at #5590 , this was tested to work well.
Fixes #5590 .
2019-09-09 17:36:14 +02:00
Diego Prado Gesto
ddcd8e40cc
Merge pull request #6292 from samirabaza/patch-7
...
Update printrbot_simple.def.json
2019-09-09 16:26:51 +02:00
Ghostkeeper
354729b621
Only show support flow if support is enabled
2019-09-07 23:19:59 +02:00
Ghostkeeper
5e302c6a67
Fix display of Z Hop After Extruder Switch Height on single extruder
...
If the setting is enabled on a single extruder printer, it'll show the Z Hop Height setting anyway even though it has no effect.
2019-09-07 23:18:02 +02:00
Ian Paschal
dfc23d994f
Add bom_numbers field to definitions
...
CS-171
2019-09-06 16:03:26 +02:00
Ghostkeeper
82aa0492ea
Revert "CS-171 Add R2 support"
2019-09-06 14:00:04 +00:00
Ian Paschal
b7cc48131c
Add bom_numbers field to definitions
...
CS-171
2019-09-06 11:23:02 +02:00
Ghostkeeper
bff9f2fb82
Merge branch 'patch-5' of https://github.com/samirabaza/Cura into samirabaza-patch-5
2019-09-05 14:38:47 +02:00
Lipu Fei
c7c859f02c
Revert "Update S3 definition"
...
CURA-6742
This reverts commit bb11c695e24b3df92e388ecaf28dba9fb9e90c88.
2019-09-05 09:14:52 +02:00
Lipu Fei
bb11c695e2
Update S3 definition
...
CURA-6742
2019-09-04 17:40:04 +02:00
Diego Prado Gesto
ebd3b4b9bf
Change the URL to check for new firmware
...
Contributes to CURA-6742.
2019-09-04 10:26:48 +02:00
Ghostkeeper
52cb68fdb3
Commit actual files instead of my symlinks
...
I've been having this profile added via a symlink so that it would update itself. I didn't know that symlinks were possible in Git.
Contributes to issue CURA-6742.
2019-09-04 09:23:27 +02:00
Ghostkeeper
de7915688a
Move profiles from pr-data to main Cura repository
...
Don't look too deeply into this, please.
Contributes to issue CURA-6742.
2019-09-04 09:16:22 +02:00
Ghostkeeper
51ed0072db
Apply proposed Creality changes
...
These are the changes currently confirmed by multiple people in this comment: https://github.com/Ultimaker/Cura/issues/6106#issuecomment-524241165
Contributes to issue #6106 .
2019-09-03 09:48:01 +02:00
SAMSECTOR
cb65cb868e
Update printrbot_simple.def.json
...
manufacturer name changed from "PrintrBot" to "Printrbot" to allow the profile under the "Add a printer" menu
not appearing in version 4.2.1
2019-09-02 22:20:20 +03:00
SAMSECTOR
957add798b
Update printrbot_simple_extended.def.json
...
manufacturer name changed from "PrintrBot" to "Printrbot" to allow the profile under the "Add a printer" menu
not appearing in version 4.2.1
2019-09-02 22:14:24 +03:00
trouch
925c7cd777
make Ender-5 Plus and CR-10 Max visible
2019-08-28 15:04:17 +02:00
pinchies
15e91bb32a
Add JGAurora A3S ( #6235 )
...
* Add profile for JGAurora JGMaker Magic
CURA-6734
2019-08-26 10:34:58 +02:00
trouch
a9fb282a41
add CR-10 Max and Ender-5 Plus definitions
2019-08-25 11:47:38 +02:00
Ghostkeeper
7ccf46124f
Give warning when build plate temperature is below volume temperature
...
It's not going to become lower than the ambient temperature after all.
2019-08-22 13:37:30 +02:00
Ghostkeeper
9f16973215
Don't remove skirt when printing with support
...
According to tests by theWaldschrat and Liger0, the skirt is still necessary when support is enabled.
Fixes #6229 .
2019-08-22 09:46:49 +02:00