1757 Commits

Author SHA1 Message Date
Mark Burton
9941c2d8f4 Added support_fan_enable and support_supported_skin_fan_speed settings.
These let you override the fan speed when printing the skin regions immediately above support.
2018-04-22 10:13:51 +01:00
kerog777
85fb9441ea Made requested changes to version numbers, etc. per comments fro
previous pull request.
2018-04-21 09:34:41 -07:00
Lipu Fei
d0c6d87417 Fix Rigid3D Mucit definition
CURA-5257

 - Remove extra trailing spaces
 - Replace TABs with SPACEs
 - "value"s should use quotes ""
2018-04-20 14:52:52 +02:00
Lipu Fei
addcf5236a
Merge pull request #3642 from Rigid3D/master
Printer Definitions for Rigid3D Mucit
2018-04-20 14:43:58 +02:00
kerog777
52d2057e64 Add profile data for Felix Tec4
Includes 2 extruder definitions, platform mesh, and variants for 0.25,
0.35, 0.5, and 0.7 mm nozzles
2018-04-19 08:24:45 -07:00
Lipu Fei
94b2209b49 Merge remote-tracking branch 'origin/3.3' 2018-04-19 09:40:30 +02:00
Lipu Fei
aab87a5558
Merge pull request #3584 from ohrn/zyyx
Add ZYYX Agile printer.
2018-04-19 09:38:19 +02:00
Ghostkeeper
e43e9ad117
Merge branch '3.3' 2018-04-17 13:56:46 +02:00
Ghostkeeper
b744302557
Merge branch 'M&P-Setting-Optimization' into 3.3 2018-04-17 13:56:11 +02:00
Ghostkeeper
455abb15bf
Consistently use capital letters for CLI settings too
They're not actually visible, but in case they are made visible by modifying the preferences file...
2018-04-16 12:36:17 +02:00
Ghostkeeper
133f6f43fe
Merge branch '3.3' 2018-04-13 16:14:23 +02:00
Jaime van Kessel
5d1d426037 Merge branch 'master' of github.com:Ultimaker/Cura 2018-04-12 21:56:13 +02:00
Jaime van Kessel
dc935e2698 Added unit to adaptive layer height settings 2018-04-12 21:55:51 +02:00
Diego Prado Gesto
df521dcc93 Change description of a setting.
Contributes to CURA-5222.
2018-04-12 14:56:42 +02:00
Ghostkeeper
13f63a7051
Rename 'No Skin' to 'Not in Skin'
It's a bit more clear, as discussed in #3115. To actually change the functionality requires a bit more effort for which I'll need to make a ticket.
2018-04-12 14:39:46 +02:00
Mehmet Sutas
0207f4d62d
Update rigid3d_mucit.def.json 2018-04-10 00:06:03 +03:00
Mehmet Sutas
25322e4829
Rigid3D Mucit Cura Definitions 2018-04-09 23:54:53 +03:00
Gabriele Rossetti
9607fd261a
Upate deltacomb.def.json
bad indenting fixes
2018-04-09 14:21:39 +02:00
alekseisasin
7b9bf23786
Merge pull request #3411 from BagelOrb/support_retraction_setting
setting to disable omitting retractions in support
2018-04-09 13:57:49 +02:00
Gabriele Rossetti
f4399834b4
Update deltacomb.def.json
Some quality improvements
2018-04-05 17:11:32 +02:00
Ghostkeeper
4ad9867591
Add setting to try multiple line thicknesses
Engine implementation pending. This setting is intended for debugging problems with interrupted walls. It should probably not be published in a final release.

Contributes to issue CURA-5189.
2018-04-03 16:38:19 +02:00
Fredrik Öhrn
569c5b3178 Set preferred material to proPLA which has a tuned quality profile. 2018-03-31 13:51:38 +02:00
Fredrik Öhrn
a4a388eb4b Fix machine steps type. 2018-03-31 13:51:38 +02:00
Fredrik Öhrn
99597bf8c7 Add ZYYX Agile printer. 2018-03-28 22:35:59 +02:00
Aleksei S
2240c38fd7 Exclude HIPS and PETG material for UM
CURA-5149
2018-03-26 17:11:38 +02:00
Ruben D
c8222b73c7
Merge branch 'feature_model_check' 2018-03-22 01:56:46 +01:00
Jack Ha
9ea59c1976 CURA-4557 rename ratio percentage to percentage 2018-03-20 17:07:03 +01:00
THeijmans
5bdba905ff Changed warning value prime tower purge
Increased the value after tests show 1mm3+ primes don't lead to issues.
2018-03-20 16:07:38 +01:00
Ghostkeeper
ae1ea9fc48
Change minimum and maximum layer heights into a warning
Because it's possible to try this, but the print result will probably be terrible. This keeps it consistent with the rest of Cura's behaviour.

Fixes #3406.
2018-03-20 15:27:04 +01:00
Jack Ha
9848c07a0e Merge branch 'master' into feature_model_check 2018-03-19 14:11:37 +01:00
Ghostkeeper
0efde6bae6
Use gzipped gcode by default for UM3
For the network printing output device this doesn't work yet, but for removable drives it will now put g-code in a gz archive when storing it.

Contributes to issue CURA-5097.
2018-03-16 16:08:49 +01:00
Ghostkeeper
40ba06f011
Fix output type of BQ Hephestos
That application/x-code may actually be the XCode application or something? Whatever, it should be x-gcode...
2018-03-15 16:53:26 +01:00
Mark
1cd26b790c
Merge pull request #3474 from pouncingiguana/master
Added default material diameter to SeeMeCNC printer definitions
2018-03-15 16:44:19 +01:00
Ghostkeeper
f127660cfc
Remove whitespace at the end of the lines
Someone put tabs there.
2018-03-15 16:13:05 +01:00
Jack Ha
d0609e97e4 CURA-4557 added material_shrinkage_ratio_percentage setting 2018-03-15 11:19:14 +01:00
Lipu Fei
a477b8cdc2 Fix malyan m180 definitions
CURA-4696
2018-03-15 09:58:02 +01:00
Jack Ha
8dd065e3f5 Merge branch 'master' into extra_machine_settings 2018-03-15 09:36:30 +01:00
Lipu Fei
cff1e8639d Fix preferred material PLA for printrbot simple makers kit
CURA-5089
2018-03-14 10:48:05 +01:00
Lipu Fei
17525b9cb6
Merge pull request #3421 from timur-tabi/master
Add definition for Printrbot Simple Maker's Kit 1405
2018-03-14 10:47:20 +01:00
Ghostkeeper
00bd306307
Merge branch 'M&P-Setting-Optimization' 2018-03-14 09:02:38 +01:00
Mark Burton
4aa89068d7 Now, wall_min_flow and wall_min_flow_retract are hidden if overlap compensation is disabled. 2018-03-13 19:00:27 +00:00
Lipu Fei
5adb769cf8 Fix value function for extruders_enabled_count
CIRA-5056
2018-03-13 16:48:44 +01:00
THeijmans
392605014a Merge branch 'M&P-Setting-Optimization' of https://github.com/Ultimaker/Cura into M&P-Setting-Optimization
Fixed conflicts
2018-03-13 11:58:33 +01:00
THeijmans
4c61ea5ba9 Single extrusion settings for travels
Updated single extrusion settings, so z hops are removed and travels are shortened for single extrusion.
2018-03-13 11:45:19 +01:00
Ian Paschal
8db4396ee7
Merge pull request #3436 from Ultimaker/feature_enable_disable_extruder
CURA-4400 Feature enable disable extruder
2018-03-12 16:42:25 +01:00
Ghostkeeper
05c034558d
Set default layer height via preferred quality type
So the layer heights are correct for each quality type but the default is still 0.2mm.

Contributes to issue CURA-4981.
2018-03-12 16:03:42 +01:00
Mark Burton
88c2e37ce4 Added wall_min_flow and wall_min_flow_retract settings.
Wall lines whose flow is < wall_min_flow are converted into travel moves.
2018-03-12 10:25:39 +00:00
Jack Ha
1f8be6ad3c CURA-4400 moved default extruder value to value instead of default_value because of engine 2018-03-12 11:05:55 +01:00
Mark Burton
239961cc48 Merge remote-tracking branch 'upstream/master' into mb-retract-on-long-combs 2018-03-12 08:22:53 +00:00
Mark Burton
b732a84a6a Added retraction_combing_max_distance setting.
When this is non-zero, combing travel moves that are longer will use retraction.
2018-03-12 08:21:11 +00:00