Tim Kuipers
1d5cc92e47
Merge branch 'remove_some_zags'
2017-08-14 16:11:44 +02:00
Tim Kuipers
317de1c75d
update support_skip_zag_per_mm default value (CURA-3957)
2017-08-14 15:58:03 +02:00
Tim Kuipers
c2ac731324
update support_skip_zag_per_mm description and default value (CURA-3957)
2017-08-14 15:49:16 +02:00
alekseisasin
bc4b1d9c4d
Merge remote-tracking branch 'origin/2.7'
2017-08-14 15:11:33 +02:00
Lipu Fei
2a695517f7
Remove wall_extruder_nr from fdmprinter
...
CURA-4145
- Remove "wall_extruder_nr"
- Remove all "limit_to_extruder" for all parent wall settings
- Change settings that used to depend on the wall extruder to get
value from the inner wall extruder
2017-08-14 13:21:26 +02:00
Ghostkeeper
5423228e02
Revert "Revert "Add settings for skipping some zags""
...
This reverts commit cc26d52af32d7917735387b10f89dc3bebbde281.
2017-08-14 11:09:14 +02:00
Ghostkeeper
f1322d1656
Merge branch '2.7'
2017-08-14 11:09:03 +02:00
Ghostkeeper
cc26d52af3
Revert "Add settings for skipping some zags"
...
This reverts commit a0e59dd6aa88da5d2e73c5611421c7924e6209f9.
2017-08-14 11:08:28 +02:00
Ghostkeeper
019b5852ab
Merge branch '2.7'
2017-08-14 11:02:48 +02:00
Ghostkeeper
70a0a6ef1c
Fix infill before walls check
...
This could be dependent on either the inner or the outer wall, depending on how many walls you have. However usually it will be the inner wall.
Contributes to issue CURA-4145.
2017-08-14 11:02:32 +02:00
Ghostkeeper
4728f31996
Merge branch '2.7'
2017-08-11 12:38:49 +02:00
Ghostkeeper
824849a878
Make manufacturer for base fdm- definitions unknown
...
They are always overwritten, but if it isn't overwritten we don't know the manufacturer for the printer.
Contributes to issue CURA-4159.
2017-08-11 12:38:34 +02:00
Ghostkeeper
76e0156076
Merge branch '2.7'
2017-08-11 11:18:15 +02:00
Ghostkeeper
e1266ceb1f
Change Ultimaker manufacturer to Ultimaker B.V.
...
The material profiles are sent to UM3 with a manufacturer that's obtained from the printer definition rather than the material definition. The printer definition was 'Ultimaker' rather than 'Ultimaker B.V.' and the printer checked against this.
Contributes to issue CURA-4159.
2017-08-11 10:24:13 +02:00
Lipu Fei
0a76e5c38f
Merge branch '2.7'
2017-08-09 16:59:56 +02:00
Lipu Fei
1aba451149
Fix value for outer wall_line_width
...
CURA-4145
2017-08-09 13:52:05 +02:00
Lipu Fei
98b72fb971
Merge branch '2.7'
2017-08-09 13:16:43 +02:00
Ghostkeeper
c0d96a1d79
Remove heat/cool speeds that are equal to default
...
The default value for both of these settings in fdmprinter is 2.
2017-08-09 09:46:22 +02:00
Lipu Fei
7d3ad43c90
Merge pull request #2177 from Ultimaker/raft_smoothing
...
JSOn feat: raft smoothing setting (CURA-3854)
2017-08-09 08:40:34 +02:00
Lipu Fei
63ea940680
Add minimum_value 0 for raft_smoothing
...
CURA-3854
2017-08-09 08:39:10 +02:00
Lipu Fei
33bf758081
Merge pull request #2127 from ChrisRiddell/cr_fix_ironing_settings
...
Keep Ironing settings together while in experimental
2017-08-08 16:54:37 +02:00
Lipu Fei
050caf49b2
Merge branch '2.7'
2017-08-08 16:44:58 +02:00
Lipu Fei
f75871567f
Merge branch 'master' into cr_fix_ironing_settings
2017-08-08 16:43:48 +02:00
Ghostkeeper
919bc6767c
Disable top surface line directions if there is no top surface
2017-08-08 11:40:19 +02:00
alekseisasin
c5cdf2e206
UM3 Initial layer speed is fixed 20
...
CURA-3377
2017-08-03 15:19:17 +02:00
alekseisasin
03c48ac39c
Addded other printer "Kemiq Q2 Gamma & Beta" and material quality
...
CURA-4086
2017-08-03 15:05:45 +02:00
alekseisasin
543fda4656
Merge pull request #2136 from kemiq3d/master
...
Add Kemiq Q2 Beta and Kemiq Q2 Gama definitions, mesh and qualities
2017-08-03 15:04:35 +02:00
Lipu Fei
f5c1bd6abd
Add unit "mm" for Support Chunk Size
...
CURA-3957
2017-08-03 13:55:52 +02:00
Lipu Fei
8029efdffb
Rename skip-some-zags setting names
...
CURA-3957
2017-08-03 13:55:24 +02:00
Lipu Fei
50960a3904
Merge branch 'master' into remove_some_zags
2017-08-03 13:10:39 +02:00
alekseisasin
2a5ac4c4da
UM3 Initial layer speed is fixed 20
...
CURA-3377
2017-08-03 09:57:27 +02:00
Ghostkeeper
b43acf5b18
Revert "Revert "Revert "feat: Skin Reference wall settings (CURA-3990)"""
...
This reverts commit 0d4604bb0c4eab56864b87f1b40c1d86b83efae5.
2017-08-02 11:02:14 +02:00
Ghostkeeper
6e97b5003d
Revert "Revert "Revert "better description skin reference wall settings (CURA-3990)"""
...
This reverts commit f39fd47b6c7dc6cc8bd6598cd450505742ff5e01.
2017-08-02 11:02:02 +02:00
Ghostkeeper
8b77465127
Revert "fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)"
...
This reverts commit ce13e84bd03478bf2913eaa7e3ed97a04c8fd3c1.
2017-08-02 11:00:26 +02:00
Tim Kuipers
ce13e84bd0
fix: set default of bottom reference wall to legacy behavior (CURA-3990 CURA-4103)
2017-08-01 13:53:31 +02:00
Tim Kuipers
f39fd47b6c
Revert "Revert "better description skin reference wall settings (CURA-3990)""
...
This reverts commit 8fc5b2dfee93ed40e200d1680eb36d45177f0af2.
This reimplements the Skin Reference Wall setting
2017-08-01 13:51:41 +02:00
Tim Kuipers
0d4604bb0c
Revert "Revert "feat: Skin Reference wall settings (CURA-3990)""
...
This reverts commit a3a0999df2eb3c9f25a0c63a20737c4c0081b982.
This reimplements Skin Reference Wall
2017-08-01 13:51:12 +02:00
Ghostkeeper
6993160ae5
Merge branch 'mb-group-walls' of https://github.com/smartavionics/Cura into smartavionics-mb-group-walls
2017-08-01 09:44:24 +02:00
Lipu Fei
02ba46b29f
Add support_skip_zag_per_mm
...
CURA-3957
2017-08-01 08:23:28 +02:00
Lipu Fei
26ec06e1fe
Update setting labels and descriptions
...
CURA-3957
2017-07-31 13:40:22 +02:00
Ghostkeeper
f298c29d5f
Disallow retraction/prime speeds of 0
...
This would cause divisions by 0.
2017-07-31 13:40:10 +02:00
Lipu Fei
a3a0999df2
Revert "feat: Skin Reference wall settings (CURA-3990)"
...
This reverts commit 3af089cfa01bacb33245441406edff71c1625014.
2017-07-31 10:20:33 +02:00
Lipu Fei
8fc5b2dfee
Revert "better description skin reference wall settings (CURA-3990)"
...
This reverts commit cbc3daf535e8bf4e1fb0e98376fdff4e8352008a.
2017-07-31 10:20:30 +02:00
Tim Kuipers
2ffeaadc46
JSOn feat: raft smoothing setting (CURA-3854)
2017-07-29 15:19:28 +02:00
Ghostkeeper
b714f0ff3e
Merge branch 'master' of github.com:Ultimaker/Cura
2017-07-28 10:48:21 +02:00
Mark Burton
b74e25cb14
Move optimize_wall_printing_order into the experimental category and change the default value to false.
2017-07-27 16:47:07 +01:00
Mark Burton
9fc39a19c9
Merge remote-tracking branch 'upstream/master' into mb-group-walls
2017-07-27 16:43:25 +01:00
Tim Kuipers
d052511be5
rename: Top Surface Infill ==> Top Surface Skin
2017-07-27 17:11:56 +02:00
Tim Kuipers
693cbd2f9f
fix: don't enable Roffing by default
2017-07-27 17:05:02 +02:00
Lipu Fei
ed525478d6
Merge remote-tracking branch 'upstream/skin_reference_wall'
2017-07-27 14:41:07 +02:00
