GitHub-Proxy/Cura
1
0
Fork 0
mirror of https://git.mirrors.martin98.com/https://github.com/Ultimaker/Cura synced 2025-05-09 17:09:01 +08:00
Code Issues Packages Projects Releases Wiki Activity
4,279 Commits 290 Branches 260 Tags
Commit Graph

259 Commits

Author SHA1 Message Date
fieldOfView
12d59cb465 Only show "Enable Prime Tower" setting for multiextrusion printers 
CURA-2126
 2016-08-16 10:58:37 +02:00
fieldOfView
f2a44bec8d Add missing material_bed_temp_prepend 2016-08-15 15:55:45 +02:00
fieldOfView
f0622cdda6 Add start & end gcode to UM2 depending on gcode flavor 
CURA-580
 2016-08-15 13:42:06 +02:00
Aldo Hoeben
f2d35cd57d Merge pull request #918 from Ultimaker/feature_terminology 
Update UI texts to be compliant to Ultimaker dictionary
 2016-08-15 11:35:19 +02:00
Ghostkeeper
4472e0206e
Fix calls to max function 
I think this was my mistake.
 2016-08-12 16:56:07 +02:00
Tim Kuipers
85d97453f1
JSON feat: brim only on outer boundary polys (CURA-1413) 2016-08-12 11:18:37 +02:00
Ghostkeeper
8c231e2942
Allow higher speeds for diagonal wireframe moves 
Since these moves are slightly diagonal in all directions, a higher speed can be achieved. Exactly how high depends on both angles, but for simplification this limit is a bit too broad, allowing speeds that the printer can't handle. The firmware should catch that case if it happens.

Contributes to issue CURA-1049.
 2016-08-11 10:54:00 +02:00
Ghostkeeper
4e13c262cf
Re-add max warning value for speed_slowdown_layers 
It warns if the slowdown layers span more than 1mm.

Contributes to issue CURA-1049.
 2016-08-11 10:53:59 +02:00
fieldOfView
957f60eb11 Add first draft of an UMO with Dual Extrusion Kit definition 
CURA-1774
 2016-08-10 18:04:30 +02:00
fieldOfView
85a58a22cb Change "Bed"/"Platform" to "Build Plate" 
UXD-76
 2016-08-10 17:57:05 +02:00
fieldOfView
2963a64fc2 Change "Bed Temperature" to "Build Plate Temperature" 
UXD-80
 2016-08-10 17:55:52 +02:00
fieldOfView
885acb49dc Change "Cooling Fans" to "Print Cooling" 
UXD-81
 2016-08-10 17:55:51 +02:00
fieldOfView
7aab8ad397 Change "object" to "model" 
UXD-83
 2016-08-10 17:55:51 +02:00
Tim Kuipers
63f5889eae JSON fix type (CURA-1049) 2016-08-10 17:06:51 +02:00
Ghostkeeper
15fef2452b
Limit speeds to max feedrates of the printer 
Also number of slowdown layers is no longer limited by light speed.

Contributes to issue CURA-1049.
 2016-08-10 13:52:28 +02:00
Jaime van Kessel
967591bccb Infill pattern is now viewed from right stack again 
CURA-2072
 2016-08-09 17:20:37 +02:00
Tim Kuipers
6477e588da JSON feat: override max z feedrate (CURA-1049) 2016-08-08 17:02:49 +02:00
Tim Kuipers
ca8ded6c35 JSON fix: support z dist defaults to 1 layer instead of 2 (CURA-1283) 2016-08-08 13:23:03 +02:00
Ghostkeeper
d98c122bd5
Disable extruder selection drop-downs in single-extrusion machines 
They don't function in single-extrusion machines.
 2016-08-08 12:56:45 +02:00
Tim Kuipers
c57f13b3d3 JSON fix: turn off flow equalization by default (CURA-2065) 2016-08-08 10:13:14 +02:00
Tim Kuipers
4f3b6e254e Merge branch 'mergeinfillchanges' of https://github.com/markwal/Cura into markwal-mergeinfillchanges 2016-08-08 09:37:49 +02:00
fieldOfView
fa0d8f912f Don't show UMO upgrades page for UMO+ 2016-08-05 16:02:10 +02:00
Ghostkeeper
09801db5f8
Fix support interface density and pattern global inherits stack 
These depend on values that are obtained through global_inherits_stack, so they must also have global_inherits_stack.

Contributes to issue CURA-2024.
 2016-08-05 13:48:04 +02:00
Mark Walker
a485b58051 Move equalize_flow settings ahead of acceleration 
And add "the print speed" to the description
 2016-08-04 12:18:53 -07:00
Mark Walker
1e62b43d53 Rename pressure to flow 2016-08-04 10:54:04 -07:00
Mark Walker
eddbc87ceb New settings to allow control over automatic speed 
changes when MergeInfillLines adjusts speed for even pressure when
changing extrusion widths.
 2016-08-04 10:34:53 -07:00
Ghostkeeper
93f6f5d8d3
Don't use extruderValue on settings that have no global_inherits_stack 
It's unnecessary and seems to break things.

Contributes to issue CURA-2024.
 2016-08-04 16:54:43 +02:00
Ghostkeeper
f3a119f9bb
Use correct extruder's value when inheriting global_inheritance_stack settings 
This uses the new function extruderValue() which picks the value from a different extruder. Every setting that has the global_inheritance_stack property is now referenced via the extruderValue() setting in all functions.

Contributes to issue CURA-2024.
 2016-08-04 13:35:13 +02:00
Ghostkeeper
b89a9a8113
Allow freezing temperatures 
But not on Ultimaker printers, because they crash.
 2016-08-04 12:50:03 +02:00
Ghostkeeper
eeec460635 Merge branch 'feature_support_bottoms' 2016-08-03 17:40:28 +02:00
Arjen Hiemstra
78aaf4caf0 Use the new extruderValues() function to determine max_warning of layer_height 
Contributes to CURA-2009
 2016-08-02 19:42:40 +02:00
Tim Kuipers
401e302ad5 Merge branch 'master' into feature_support_bottoms 2016-08-02 12:46:44 +02:00
Tim Kuipers
dc3d22f148 JSON: disabled flow temp again (CURA-1174) 2016-08-02 11:48:47 +02:00
fieldOfView
a2fa8246b6 Disable UM2 material-related settings depending on gcode flavor... 
...instead of hardcoding them as disabled.

The fdmprinter inheritance-functions for "enabled" are combined with a check for the flavor. This way it will be easier to switch an UM2 to a functional Reprap flavor in a variant. CURA-580
 2016-08-02 09:50:42 +02:00
fieldOfView
42fc25ab09 Move sorting of DefinitionContainerModel out of qml 
Add printer dialog now has sections by a configurable metadata property. A prefered section is set to always show on top.
Add weights to the Ultimaker printer definitions to create a sensible list (newest on top).

CURA-1593
 2016-08-01 19:18:56 +02:00
Ghostkeeper
e7452cd644
Make speed_layer_0 and cousin settings not per-mesh 
Fixed up some of the settable_per stuff.

Contributes to issue CURA-1507.
 2016-08-01 16:35:48 +02:00
Ghostkeeper
dc6482853a
Split acceleration_layer_0 and jerk_layer_0 into print/travel 
Exactly the same as how it's done with speed_layer_0.

Contributes to issue CURA-1507.
 2016-08-01 14:15:11 +02:00
Ghostkeeper
4adadd86eb
Fix defaults of some settings 
It was saying 'default' instead of 'default_value'. Must've been translated wrong from 2.1.
 2016-08-01 14:15:11 +02:00
fieldOfView
228f5be35a Fix order of machine actions on manage printers page 
MachineActionManager now uses lists instead of dicts because dicts don't maintain the order.
 2016-07-29 17:14:18 +02:00
fieldOfView
0a75aa7496 Fix category of PrintrBot simple definition 
CURA-1593
 2016-07-29 16:40:58 +02:00
Tim Kuipers
4b192db1bf JSON: extruders cannot be more than 16 (CuraEngine hardcoded value) (CURA-2015) 2016-07-28 20:16:44 +02:00
Tim Kuipers
27f160c220 JSON fix: made retraction_hop_only_when_collides and retraction_hop not children of retraction_hop_enabled 
retraction_hop_enabled was used by the engine, so it should never become disabled
 2016-07-28 19:52:43 +02:00
Tim Kuipers
34ac8cf66f Merge branch 'feature_first_layer_travel_speed' 2016-07-28 17:05:07 +02:00
Tim Kuipers
20b96b4716 Merge branch 'master' into feature_first_layer_travel_speed 2016-07-28 16:48:42 +02:00
Tim Kuipers
1f903b9fcc JSON renames: support_roof_... ==> support_interface... (CURA-1013) 2016-07-28 14:06:00 +02:00
Tim Kuipers
2ab9531f83 Merge branch 'master' into feature_support_bottoms 2016-07-28 13:53:43 +02:00
Ghostkeeper
40932a3ad2
Set default of draft shield height to 10mm 
This is a fairly arbitrary default until we have tests from materials. The draft shield height is now only used by the engine if the draft shield is enabled and limited.

Contributes to issue CURA-1295.
 2016-07-28 13:33:27 +02:00
Ghostkeeper
6af0f28f32
Only show draft shield height if draft shield enabled 
We must've missed that one previously.

Contributes to issue CURA-1295.
 2016-07-27 17:50:34 +02:00
Tim Kuipers
d1f4fadbfc Merge branch 'master' into feature_support_bottoms 2016-07-27 17:40:36 +02:00
Tim Kuipers
cd26794155 JSON fix: retrieve globalish support settings from support extruder (CURA-2003) 2016-07-27 17:27:57 +02:00