Filip Goc
f7da0fd301
Update JellyBOX start gcodes
2019-06-15 21:17:57 +02:00
Filip Goc
9ad6c16c58
Update the JellyBOX definitions
2019-06-15 21:10:48 +02:00
Ghostkeeper
a39ac2ca22
Reduce travel jerk/acceleration and reduce print jerk slightly
...
These settings are preventing layer shifts on the Tevo Tornado according to our users at #5694 .
2019-06-14 11:50:58 +02:00
Ghostkeeper
a89465afa1
Build volume temperature should not be settable per extruder
...
Just like build plate temperature, the per-extruder profiles can still override it but it will be resolved to a single global value.
2019-06-14 11:38:18 +02:00
Ghostkeeper
52ed79805e
Enable numerous settings that just work fine with tree support
...
Found via a report in #5453 .
2019-06-14 09:51:27 +02:00
Ghostkeeper
b5a59d19ff
Set acceleration to 500 for Tevo Tornado
...
The users of this printer in #5702 found this to be a better value to prevent layer shifting. Fixes #5702 .
2019-06-12 10:38:54 +02:00
Ghostkeeper
9bcf1cd761
Reduce Tevo Tornado's jerk to 10 by default
...
This prevents layer shifts, according to the users in #5702 .
2019-06-12 10:35:37 +02:00
Ghostkeeper
81919b75df
Implement Z Hop Speed
...
Z Hops have their own speeds now. It no longer uses the maximum feedrate, which was unknown for some printers and therefore limited only to light speed, which was too much for some printers to handle.
Implements CURA-6532.
2019-06-06 10:15:50 +02:00
Ghostkeeper
233ce41b29
Merge branch 'patch-1' of https://github.com/BarrensZeppelin/Cura into BarrensZeppelin-patch-1
2019-05-31 14:53:48 +02:00
Ghostkeeper
95e7835da8
Better defaults for preshrink and skin expansion distance in CLI
...
Discovered during investigation of Ultimaker/CuraEngine#1062 .
2019-05-31 13:06:10 +02:00
Mark Burton
77643d1788
Fix visibility of Connect Support Lines.
2019-05-31 07:58:47 +01:00
Oskar Haarklou Veileborg
5dca589d6a
fdmprinter.def.json: draft_shield_enable -> draft_shield_enabled
...
This seems to have been typos.
2019-05-30 11:06:41 +02:00
Cherubim
310a48a2c9
Correct American spelling: Flavour -> Flavor
2019-05-28 15:33:47 +02:00
Cherubim
eea9528795
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2019-05-28 12:56:18 +02:00
maukcc
62d0c44e14
HMS434 update
2019-05-27 13:53:19 +02:00
maukcc
6af43f6497
HMS434 update
...
gantry height set
2019-05-23 11:18:53 +02:00
maukcc
27837feb73
HMS434 update
...
start gcode update
2019-05-23 11:14:12 +02:00
maukcc
86cb9c2f99
HMS434 update
...
HMS434 multi tool update
2019-05-23 11:02:11 +02:00
Lipu Fei
9187738d9c
Merge pull request #4599 from DesktopMetal/feature_nozzle_switch_extra_prime_distance
...
Feature: "Nozzle Switch Extra Prime Distance"
2019-05-21 09:18:11 +02:00
Ghostkeeper
b52b6251b9
Clarify description of build volume temperature a bit
...
Contributes to #5756 .
2019-05-20 15:35:53 +02:00
Ghostkeeper
cdda24b33a
Merge branch '4.1'
2019-05-20 14:30:47 +02:00
Ghostkeeper
9a9f584285
Reduce jerk for Creality printers
...
As tested by our community.
Fixes #5694 .
2019-05-20 14:30:29 +02:00
Vlad Gribinchuk
055dcddd1e
Change switch_extruder_extra_prime_amount setting to be more consistent with other
2019-05-20 14:35:27 +03:00
Lipu Fei
33aae24d6d
Merge remote-tracking branch 'origin/4.1'
2019-05-17 14:41:52 +02:00
Lipu Fei
584a101902
Fix limit to extruder for support infill angle
...
CURA-6529
2019-05-17 14:19:39 +02:00
Jaime van Kessel
314a6495c4
Merge branch '4.1' of github.com:Ultimaker/Cura
2019-05-16 16:40:10 +02:00
Remco Burema
d4f891d548
Brim for prime tower fix for resolve. [CURA-6492]
2019-05-16 12:39:12 +02:00
Diego Prado Gesto
2cbdc49539
Merge branch '4.1'
2019-05-16 12:13:04 +02:00
Remco Burema
19ce6aa65f
Prime tower brim (unless raft) by default. [CURA-6492]
2019-05-15 13:27:33 +02:00
Lipu Fei
7f8896705f
Merge remote-tracking branch 'origin/4.1'
2019-05-14 10:41:12 +02:00
Lipu Fei
5280ec4af5
Fix Mark2 appearing at the bottom of machine list
2019-05-14 10:38:27 +02:00
Ghostkeeper
c3efb666e8
Remove non-existent setting override
2019-05-14 09:06:26 +02:00
Ghostkeeper
03d96f3fb5
Merge branch '4.1'
2019-05-13 17:11:39 +02:00
Ghostkeeper
2e93948c84
Take minimum of all build volume temperature values
...
According to the Materials and Processing team here, this is better because it guarantees that the coldest of your materials won't sag.
Contributes to issue CURA-6514.
2019-05-13 17:11:13 +02:00
Ghostkeeper
a41aee98f8
Set the value for PLA as the default for build volume temperature
...
This way, most prints with 3rd party materials and 3rd party printers will be fine. Also, it requires me to change the fewest amount of profiles.
Contributes to issue CURA-6514.
2019-05-13 16:31:33 +02:00
Ghostkeeper
60060db0d5
Reduce weight of S5 definition
...
It's now the 2nd year after the introduction of the S5 so we have to reduce this weight by one.
Contributes to issue CURA-6500.
2019-05-13 15:47:47 +02:00
Ghostkeeper
da74ef83ac
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2019-05-13 15:17:23 +02:00
maukcc
9dd4fd2128
HMS434 update
2019-05-13 15:16:15 +02:00
maukcc
80efb0bac3
HMS update
2019-05-13 15:14:28 +02:00
Ghostkeeper
3a6534a3a4
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
...
Conflicts:
resources/definitions/hms434.def.json -> We both fixed the gantry height value vs. default_value problem.
2019-05-13 15:11:32 +02:00
Diego Prado Gesto
36ddf2f018
Do not allow the use of "weight" for third party printers
...
Otherwise external contributors can manipulate the order in which they appear in the list
2019-05-13 13:49:00 +02:00
maukcc
abf5719f11
HMS434 updates
...
Small updates for the HMS434 machine
2019-05-13 10:01:03 +02:00
Ghostkeeper
022c2678d0
Overwrite gantry height value instead of default_value
...
Because fdmprinter now overwrites the value using a formula, the default_value properties are no longer used.
2019-05-13 09:38:36 +02:00
Ghostkeeper
137619567a
Merge branch '4.1'
2019-05-13 09:32:58 +02:00
Ghostkeeper
e26e825d83
Overwrite gantry height value instead of default_value
...
Because the default in fdmprinter has a formula in the value, the default_value properties wouldn't get used any more.
2019-05-13 09:30:32 +02:00
Ghostkeeper
dbcea27405
Merge branch 'GunZi200-patch-1'
2019-05-10 13:14:55 +02:00
Guðni Már Gilbert
d5b6b80291
removed an extra comma
2019-05-10 10:07:53 +00:00
Guðni Már Gilbert
1277220aed
Adjust retraction distance and retraction speed
2019-05-09 22:06:34 +00:00
Guðni Már Gilbert
056f36f6ac
Update creality_ender3.def.json
...
I suggest a change to the value of max Z-axis Jerk to be the same as on Marlin 1.1.9 firmware used by Ender 3. Its a small change, reducing 0,4 to 0,3. Having these settings match the firmware's configuration makes a print's estimated time more accurate.
2019-05-09 20:40:14 +00:00
Lipu Fei
0d0825e9f3
Merge pull request #5718 from Ultimaker/corner_preference_smart
...
Add option to prefer hiding seams in a smarter way
2019-05-09 15:59:13 +02:00
