MaukCC
288e519278
Update cartesio.def.json
2017-04-06 12:13:39 +02:00
fieldOfView
e6121039d9
Add extruders to Custom FDM Printer definition
2017-04-06 09:41:14 +02:00
MaukCC
8d49bbd2f5
Update cartesio.def.json
2017-04-05 16:40:02 +02:00
Ghostkeeper
0414811079
Correct description of support roof pattern
...
This was a copy-paste error.
Contributes to issue CURA-3491.
2017-04-05 14:07:45 +02:00
Ghostkeeper
89b296ef65
Describe the value of the support interface density settings rather than the action
...
We use an object form rather than a verb form.
Contributes to issue CURA-3491.
2017-04-05 14:06:23 +02:00
Ghostkeeper
945c438c22
Remove support interface resolution settings
...
This reverts commit 92d34a8d7293923646224054c2afcfa57504847e, but not entirely because I wanted to retain the new description for support interface resolution itself.
Contributes to issue CURA-3491.
2017-04-05 14:02:19 +02:00
Ghostkeeper
d65cc00c69
Rephrase description of enable support bottoms
...
It must have a different phrasing than 'support bottom', or else it won't give an actual explanation of what support bottoms are, but 'flooring' was not acceptable.
Contributes to issue CURA-3491.
2017-04-05 13:39:03 +02:00
Ghostkeeper
e09dc40dff
Switch descriptions of support top and bottom speed
...
Had it wrong way around on what it affects.
Contributes to issue CURA-3491.
2017-04-05 13:33:42 +02:00
Ghostkeeper
210e9b5869
Merge branch '2.5'
2017-04-05 09:53:53 +02:00
Ghostkeeper
7b4375e3d1
Adjust minimum value warnings for line width
...
This was discussed with Tom from materials. The minimum warning value is now a linear function with a y-intercept. I tuned it so that it just sails under the minimum values of all of our profiles.
2017-04-05 09:53:14 +02:00
MaukCC
513ede0fda
Update cartesio.def.json
2017-04-05 09:07:14 +02:00
MaukCC
8ff057d483
Update cartesio.def.json
2017-04-05 09:05:29 +02:00
MaukCC
e6bdf8c8f6
Update cartesio.def.json
2017-04-05 09:04:16 +02:00
MaukCC
edbfd4343a
Update cartesio.def.json
2017-04-04 20:46:37 +02:00
MaukCC
21c14f58aa
Update cartesio.def.json
2017-04-04 18:05:27 +02:00
MaukCC
bb200fa9e8
Update cartesio.def.json
2017-04-04 18:04:25 +02:00
MaukCC
c9397fd986
Update cartesio.def.json
2017-04-04 18:01:52 +02:00
Jaime van Kessel
a69bf967e5
Merge branch 'master' of github.com:Ultimaker/Cura
2017-04-04 13:31:02 +02:00
Jaime van Kessel
d5382c7924
Merge branch 'revise_jellybox_support' of git://github.com/IMADE3D/cura
2017-04-04 13:28:53 +02:00
Jaime van Kessel
7e201439d3
Merge branch 'feature_spaghetti_infill' of github.com:Ultimaker/Cura
2017-04-04 13:03:34 +02:00
Jaime van Kessel
68f536dc5f
Merge pull request #1538 from Ultimaker/feature_mold
...
Mould
2017-04-04 12:53:33 +02:00
Tim Kuipers
eaca23c50e
feat: support_mesh_drop_down (CURA-2747)
2017-04-03 17:12:59 +02:00
Tim Kuipers
7f07be3444
JSOn rename: Enable Support ==> Generate Support (CURA-2747)
...
The generate support settings has been renamed because support will still be printed even when it is not generated by the engine,
but given by a support mesh
2017-04-03 17:11:57 +02:00
Ghostkeeper
2e790852ce
Merge branch '2.5'
2017-04-03 11:38:28 +02:00
Ghostkeeper
1968f5e1e0
Disable bed temperature instead of making it invisible
...
The visible property doesn't exist any more in favour of the enabled property.
2017-04-03 10:34:34 +02:00
Tim Kuipers
0c6a2f0f6d
Merge branch 'master' into feature_support_stair_width
2017-03-30 12:02:37 +02:00
Tim Kuipers
e4a1d4dce2
JSON fix: default mold width: 5mm (CURA-3512)
2017-03-30 11:17:52 +02:00
Tim Kuipers
a4272bf7be
Merge branch 'master' into feature_mold
2017-03-30 11:16:27 +02:00
Ghostkeeper
6eeb61c6ff
Merge branch 'maukcc-master'
2017-03-29 13:26:14 +02:00
Ghostkeeper
23a09f7f3c
Merge branch 'master' of https://github.com/maukcc/Cura into maukcc-master
2017-03-29 13:25:34 +02:00
Filip Goc
0d4a74182b
update and rename jellybox definition
...
- jellybox -> imade3d jellybox
- includes variants
2017-03-28 12:56:19 -04:00
Ghostkeeper
2810054f8e
Fix spelling of maximum skin angle expansion description
2017-03-27 16:00:09 +02:00
Ghostkeeper
b67b41653f
Fix spelling of maximum skin angle expansion description
2017-03-27 15:59:27 +02:00
MaukCC
83f5619be0
Update cartesio.def.json
2017-03-22 09:45:41 +01:00
MaukCC
4e698cb685
Update cartesio.def.json
2017-03-22 09:45:23 +01:00
Ghostkeeper
780e24d050
Merge branch 'master' of https://github.com/austin-makeit/Cura into austin-makeit-master
2017-03-21 10:45:43 +01:00
austin-makeit
6ed00900fe
Update and rename makeit_pro_m to makeit_pro_m.def.json
2017-03-20 10:43:10 -07:00
austin-makeit
f5c9620d3b
Update and rename makeit_pro_l to makeit_pro_l.def.json
2017-03-20 10:42:37 -07:00
Tim Kuipers
5f1ffe8a4c
JSON fix: better description spaghetti_max_infill_angle (CURA-3558)
2017-03-20 13:15:32 +01:00
Jack Ha
c1ca2ac09a
Merge branch '2.5'
2017-03-20 12:56:35 +01:00
Ghostkeeper
7915dfa103
Enable support roof/bottom enabled settings when support is active
...
Their enabling shouldn't be dependent on the setting they are themselves dependent on. The settings are still effective even if support_interface_enable is off, if they are just overwritten.
Contributes to issue CURA-3491.
2017-03-20 10:55:04 +01:00
Ghostkeeper
2f1d957f99
Split support_interface_enable into roof and bottom
...
You can activate the roof and bottom separately now. If you want, of course. The original interface setting sets both of them unless overwritten.
Contributes to issue CURA-3491.
2017-03-20 10:47:37 +01:00
Ghostkeeper
92d34a8d72
Split support interface resolution into roof and bottom
...
You can now tune them separately.
Contributes to issue CURA-3491.
2017-03-20 09:40:54 +01:00
Ghostkeeper
3bae49f1d4
Split support interface pattern in two
...
You can select a pattern separately for roof and bottom.
Contributes to issue CURA-3491.
2017-03-20 09:26:35 +01:00
Ghostkeeper
5d6f2d93dc
Make support angle depend on support roof extruder instead of interface
...
It's the roof that matters for the overhang angle. The bottom has no influence.
Contributes to issue CURA-3491.
2017-03-20 09:13:57 +01:00
Ghostkeeper
2d9b2216a3
Allow printing support roof and bottom with different extruders
...
Note that currently the support_interface_extruder_nr is still used by the engine for some things and therefore the build volume calculations may not be 100% correct. I'll fix that up soon.
Contributes to issue CURA-3491.
2017-03-17 15:55:18 +01:00
Tim Kuipers
35516ccc45
JSON fix: tetrehedral infill line distance was wrong (CURA-3474)
...
the infill line distance in the frontend is the average line distance, not the line distance between two lines which are equidistant
2017-03-17 15:05:01 +01:00
Ghostkeeper
8de0bd60c7
Split support inerface line width into roof and bottom
...
This way you can change them separately.
Contributes to issue CURA-3491.
2017-03-17 15:02:44 +01:00
Ghostkeeper
3e464964db
Split support interface density into roof/bottom
...
Each has its own line distance setting. The original support interface line distance is no longer used then.
Contributes to issue CURA-3491.
2017-03-17 14:47:17 +01:00
Ghostkeeper
933ca70890
Add separate settings for support roof/bottom jerk
...
You can now tune them separately.
Contributes to issue CURA-3491.
2017-03-17 11:29:33 +01:00
