Tim Kuipers
3e97e008af
JSON fix: gradual infill has max value; warning value may be a bit lower (CURA-836)
2016-07-14 18:54:54 +02:00
Tim Kuipers
5964856991
JSON fix: n_infill_steps ==> gradual_infill_steps (CURA-836)
2016-07-14 18:54:47 +02:00
Tim Kuipers
528aa2d961
JSON feat: Gradual Infill Steps and Gradual Infill Step Height (CURA-836)
2016-07-14 18:54:40 +02:00
Ghostkeeper
1c37dc2d3d
Better warning values for extruder prime pos
...
Based on the machine dimensions and nozzle position.
Contributes to issue CURA-1816.
2016-07-14 09:13:37 +02:00
Tim Kuipers
779f66967e
JSON fix: support speed was only enabled when roofs were enabled
2016-07-12 14:48:40 +02:00
Ghostkeeper
dc7ca47be9
Fix setting enabling for support roof
...
Support roof settings should not be enabled if support roof is enabled but support itself isn't enabled.
2016-07-12 14:45:09 +02:00
Tim Kuipers
878bf35356
JSON feat: firmware acceleration and jerk settings for ultimaker printers (CURA-1646)
2016-07-12 14:43:10 +02:00
Tim Kuipers
7d2ae57f86
JSON fix: unit of jerk: mm/s³ ==> mm/s (CURA-1646)
2016-07-12 14:41:10 +02:00
Tim Kuipers
94acf810d0
JSON fix: redo all commits (squashed) which got undone in merge
...
Merge branch 'feature_firmware_travel_settings' c755479b1bc0e6c5d40a0bd0675cd04a2a1c66a2
overwrote fdmprinter.def.json with the feature branch version, rather than merging it with the master version.
This commit is just fdmprinter.def.json as it was at 2c09fc4a6723239cd744b4aa9f28007dea5852fd
2016-07-12 14:38:39 +02:00
Ghostkeeper
f63acc98b8
Fix setting enabling for support roof
...
Support roof settings should not be enabled if support roof is enabled but support itself isn't enabled.
2016-07-12 13:47:25 +02:00
Tim Kuipers
c755479b1b
Merge branch 'feature_firmware_travel_settings'
2016-07-12 11:22:32 +02:00
Tim Kuipers
5d256e5e59
Merge branch 'master' of github.com:Ultimaker/Cura
2016-07-11 16:44:04 +02:00
Tim Kuipers
2c09fc4a67
JSON fix: infill mesh order defaults to higher than for normal meshes (CURA-833)
2016-07-11 16:43:55 +02:00
Ghostkeeper
c3d395b71d
Define extruder_prime_pos_* in fdmextruder too
...
We need to have it in both, because it needs to be changed by the inheriting definitions (so it needs to be defined in fdmextruder) but it also needs to be defined for single-extrusion printers (so it needs to be in fdmprinter). I copied these definitions from fdmprinter.
Contributes to issue CURA-1816.
2016-07-11 16:29:39 +02:00
Jaime van Kessel
5638246fa2
Merge branch 'feature_cubic_isometric_infill' of github.com:Ultimaker/Cura
2016-07-11 14:40:54 +02:00
Ghostkeeper
f424097387
Improve defaults for raft settings
...
These better defaults and formulas are coming from Paul, one of our material testers.
2016-07-11 14:01:45 +02:00
fieldOfView
c01b7091c8
Wait until the nozzle temperature is reached before starting to print
...
CURA-1794
2016-07-09 18:14:16 +02:00
Jaime van Kessel
8a4ea5c710
Added warnings to top/bottom thickness if it exceeds machine height
...
CURA-1706
2016-07-08 15:26:41 +02:00
Ghostkeeper
21ae73fca0
Capitalise Euclidean dimension names
...
X, Y and Z.
Contributes to issue CURA-1816.
2016-07-08 11:53:58 +02:00
Tim Kuipers
6cdab33eb6
JSON fix: negative angles for conical overhang are possible (CURA-1412)
2016-07-07 23:59:19 +02:00
Tim Kuipers
df780023ed
JSON feat: infill_mesh_order (CURA-833)
2016-07-07 21:22:44 +02:00
Tim Kuipers
91082404be
JSON feat: infill_mesh_order (CURA-833)
2016-07-07 21:18:46 +02:00
Tim Kuipers
d6c25fcd10
JSON feat: infill mesh (CURA-833)
2016-07-07 21:04:23 +02:00
Tim Kuipers
7fc37e7a74
Merge branch 'master' of github.com:Ultimaker/Cura
2016-07-07 15:18:57 +02:00
Tim Kuipers
101b22528b
JSOn feat: nozzle startup prime location (CURA-1816)
2016-07-07 15:15:22 +02:00
fieldOfView
0e6754c0e2
Update UM2 Extended build volume height to value published in marketing materials
2016-07-06 14:06:14 +02:00
Ghostkeeper
a65bb14329
Capitalise setting label
...
This is in line with the rest of the setting labels.
2016-07-06 12:56:05 +02:00
Thomas Karl Pietrowski
be4cf00835
BQ Hephestos2: Heat up nozzle while leveling
...
Saves time and preheats the nozzle to the correct temperature (set by Cura).
Btw. the BQ support explained me the reason why they are assuming 210°C needs to set here. The reason is that the printer is just meant to be used with PLA, so they are only expecting to use exactly 210°C. Just explained them why this is incorrect when think about the possibility that Cura can set the temperature on it's own.
2016-07-05 18:22:56 +02:00
Tim Kuipers
f679b1ef68
JSON fix: merge went wrong: forgotten comma
2016-07-04 12:24:26 +02:00
Tim Kuipers
43f220278a
Merge branch 'feature_retraction_settings_per_extruder'
2016-07-04 12:09:04 +02:00
Jaime van Kessel
1242d6bf52
Added UMO upgrade selection
...
CURA-1385
2016-07-04 11:24:31 +02:00
Thomas Karl Pietrowski
cd14a15040
Using the correct placeholder
...
Thanks to Ruben!
2016-07-03 15:17:40 +02:00
Thomas Karl Pietrowski
19a718205d
BQ Hephestos2 - Preheating temperature fix
...
When starting a print with the "custom" GCode by BQ, the printer resets
the nozzle temperature to 210°C when printing via SD card (no matter
what you set on Cura) and only preheats the nozzle to 180°C when
printing via USB.
So currently the printer begins to print via USB at 180°C and reaches
the correct temperature eg.g while printing the brim.
2016-07-01 21:27:36 +02:00
Tim Kuipers
c8e61a3267
JSON feat: cubic isometric infill (CURA-1723)
2016-07-01 00:56:48 +02:00
Tim Kuipers
bcffa3f09a
JSON fix: support roof extruder could be chosen even when roofs weren't enabled (CURA-1723)
...
just putting this commit under that issue so that it will be reviewed...
2016-07-01 00:39:04 +02:00
Tim Kuipers
4885238103
JSON feat: machine_min_cool_heat_time_window (CURA-1783)
2016-06-29 14:53:13 +02:00
Tim Kuipers
911f80f237
JSON refactor: OCD told me to mode the 'label' property to the top of each machine setting
2016-06-29 14:52:39 +02:00
Ghostkeeper
ac0f743855
Clarify descriptions of jerk settings
...
This description was established after discussion with several mechanics guys as well as BagelOrb, FieldOfView and RobinMDH.
2016-06-28 17:28:44 +02:00
Jaime van Kessel
1543e4a6e0
Merge branch 'feature_zhop_over_other_material' of github.com:Ultimaker/Cura
2016-06-28 11:34:25 +02:00
Thomas Karl Pietrowski
fa36197574
CURA-1284: Changing icon for experimental category
...
Needs an icon in resources/themes/cura/icons
2016-06-27 23:21:07 +02:00
Tim Kuipers
214ffbb0bd
JSON fix: all retraction settings now only retrievable per extruder (CURA-303)
2016-06-27 15:22:45 +02:00
Ghostkeeper
0e053838b8
Add definition for Mankati Fullscale XT+
...
Provided by Tinkerman on http://www.thingiverse.com/thing:1643782 and translated for use in Cura 2.2.
2016-06-27 10:38:30 +02:00
Tobias Zanke
11cb37bd11
support prints up to 15cm width
...
NEO Firmware moves head 1cm to the right after Y endstop is pressed. This shrinks build volume to 14cm width. With this extra commands, the head moves back to the endstop. Now 15cm width builds are possible.
2016-06-26 17:05:53 +02:00
Tim Kuipers
4eaf09e982
JSON fix: the height of the extruder switch z hop is now equal to the zhop height (CURA-1506 CURA-1061)
...
making the height configurable is quite difficult with how retraction currently works and there is not a lot of added value
2016-06-24 15:25:18 +02:00
Tim Kuipers
3e67291e41
Merge branch 'master' into feature_zhop_over_other_material
2016-06-24 13:30:59 +02:00
Tim Kuipers
ccd97f1994
JSON feat: (bool) retraction_hop_after_extruder_switch (CURA-1506 CURA-1061)
2016-06-24 13:29:40 +02:00
Jaime van Kessel
cd6092581b
Removed extraneous space
...
CURA-1385
2016-06-23 11:17:28 +02:00
Jaime van Kessel
a7deb53acf
Added BedLevel as supported action to UMO
2016-06-23 11:12:06 +02:00
Jaime van Kessel
b62118dc1c
Added supported actions to all UM machines
...
CURA-1385
2016-06-22 15:29:54 +02:00
Tim Kuipers
b22d65c369
Merge branch 'master' into feature_zhop_over_other_material
2016-06-22 13:25:50 +02:00
