rijkvanmanen
651d278377
Applied printer-linter format
2023-02-09 14:29:26 +01:00
Rijk van Manen
0735748dee
cool_min_temperature can now follow default
...
PP-71
2023-02-09 14:29:16 +01:00
Rijk van Manen
9088ab23f4
cleanup initial print temperatures
...
In the initial PR for PP-71 I only cleaned up material_final_print_temperatures, but now the material_initial_print_temperatures are also coming into play, so I cleaned those as well. From research for PP-123 I know this is a safe change. Due to this cleanup the cool_min_temperature can now always follow the ultimaker default settings.
2023-02-09 14:28:11 +01:00
c.lamboo
046d6ab01c
Re-enable support towers
...
Decrease `support_offset` setting as using both support towers and support horizontal expansion would apply the same concept twice.
Remove duplicate settings in other ultimaker profiles.
Contributes to CURA-10220
Co-authored-by: Rijk van Manen <rijk.vanmanen@ultimaker.com>
2023-02-08 16:01:08 +01:00
Rijk van Manen
2888a6132e
increase cool_min_temperature
...
By default the cool_min_temperature is 15deg below print temperature. However, for PP and TPU this should be 10deg below print temperature. This is already changed for the other ultimaker printers, but I forget the UM3.
PP-71
(cherry picked from commit 0b1b19f0b19b9ac4a277a1856842f79189938867)
2023-02-03 10:46:02 +01:00
jellespijker
e6e8b58c4f
Applied printer-linter format
2023-01-30 18:01:23 +00:00
jspijker
2e58a38a44
Fix jgaurora_a6_0.28_fast profile
2023-01-30 18:59:22 +01:00
Joey de l'Arago
d25fd7a35e
Remove references to material_flow_dependant_temperature
...
CURA-10077
2023-01-30 13:27:51 +01:00
jspijker
d2f5d059cb
Bump up the settings version to 21 in profiles/definitions
...
Contributes to CURA-10077
2023-01-30 11:40:04 +01:00
jspijker
871017da73
Remove old settings from resource files
...
Contributes to CURA-10077
2023-01-27 17:13:06 +01:00
jspijker
aed56a489a
Merge remote-tracking branch 'origin/main' into PP-71_improved-minimum-layer-time-behaviour
2023-01-26 17:58:22 +01:00
rijkvanmanen
0648cc5fd6
Applied printer-linter format
2023-01-24 10:33:14 +00:00
Rijk van Manen
5aa7dcf62a
align cool_min_temperature and material_final_printing_temperature
...
Both the material_final_printing_temperature and the cool_min_temperature are 15deg lower as the printing temperature. Except for TPU and PP.
PP-71
2023-01-24 11:31:39 +01:00
Rijk van Manen
76a6e394d6
follow the default settings
...
PP-71
2023-01-24 11:26:45 +01:00
Rijk van Manen
7187550a46
follow the default settings
...
PP-71
2023-01-24 11:17:52 +01:00
Rijk van Manen
9171aa9168
follow the default settings
...
PP-71
2023-01-24 11:08:16 +01:00
Paul Kuiper
72846894ec
Renamed profiles
...
Relates to: PP-222
2023-01-23 11:06:35 +01:00
mehmetsutas
565febad0a
Applied printer-linter format
2023-01-14 19:31:50 +00:00
Mehmet Sutaş
a9bd21e1b7
Rigid3D Quality Definition Updates
2023-01-14 22:30:43 +03:00
Joeydelarago
6b463971b7
Applied printer-linter format
2023-01-11 12:43:14 +00:00
Joey de l'Arago
41c5f62c0a
Merge pull request #14083 from razzeee/add-anycubic-kobra-go
...
Add anycubic kobra go
2023-01-11 13:42:13 +01:00
casperlamboo
1c0c85a3e0
Applied printer-linter format
2023-01-10 15:38:39 +00:00
Casper Lamboo
f601e9a9f6
Merge pull request #14231 from NARUTOfzr/main
...
Add Elegoo Neptune series Printer Configuration.
2023-01-10 16:37:27 +01:00
jellespijker
99d47fe772
Applied printer-linter format
2023-01-10 08:17:39 +00:00
dengdaitianhei
89248651e9
Flsun V400 ( #12796 )
...
Adds the Flsun V400
Implements CURA-9783
2023-01-10 09:16:32 +01:00
NARUTOfzr
1dab09a8c4
Elegoo Neptune series Printer Configuration
...
These are the config files that add the Neptune series from Elegoo.
2023-01-07 17:01:11 +08:00
jspijker
5f5e758490
Applied printer-linter formatting
...
Contributes to CURA-10101
2022-12-30 23:36:12 +01:00
jspijker
85201e7f64
Merge branch 'main' into blockstech
2022-12-30 23:19:12 +01:00
Razze
3c4df20f3e
Add anycubic kobra go
2022-12-30 22:22:36 +01:00
jspijker
53d8e0c730
Applied printer-linter format
...
To make sure we have uniform diffs with our PR's
2022-12-30 22:05:41 +01:00
jspijker
e8a57518bc
Merge branch 'main' into blockstech
2022-12-30 21:25:20 +01:00
jellespijker
c4f0a47d1e
Applied printer-linter format
2022-12-30 17:07:16 +00:00
Jelle Spijker
af3ea20c53
Merge pull request #14009 from ChipCE/main
...
Added profiles for SnakeOilXY printers
Implements CURA-10099
2022-12-30 18:06:17 +01:00
Jelle Spijker
f09b0d142d
Applied printer-linter format over Sovol files
...
Contributes to CURA-10084
2022-12-28 14:10:00 +01:00
Duarte Bragadesto
1c2dcd8ef6
Merge branch 'Ultimaker:main' into master
2022-12-16 12:00:33 +00:00
Ed Ropple
f64c0b5e65
squash of ed/sovol-rework
2022-12-15 10:38:11 -05:00
jellespijker
5c098e3f02
Applied printer-linter format
2022-12-13 19:42:33 +00:00
Jelle Spijker
44d94a1206
Merge pull request #13973 from whoseyoung/main
...
official profiles for Geeetech printers
Contributes to CURA-10039
2022-12-13 20:41:25 +01:00
jellespijker
6a10b8b8b7
Applied printer-linter format
2022-12-13 15:22:03 +00:00
Jelle Spijker
4b7f67906f
Merge pull request #13987 from Ultimaker/PP-277_fix_PC_andCPE+_0.8mm_profiles
...
Fixed error in 0.8mm profiles for PC and CPE+
2022-12-13 16:20:56 +01:00
whoseyoung
996aba5662
resubmit to improve it
2022-12-13 15:27:09 +08:00
whoseyoung
d4e4901ae5
fixed known bugs
2022-12-13 14:46:24 +08:00
ChipCE
df283db1a0
Added profiles for SnakeOilXY printers
...
By : John Smith (chip@snakeoildev.com )
2022-12-10 20:33:50 +09:00
whoseyoung
5f5958dfe8
Merge branch 'Ultimaker:main' into main
2022-12-10 17:05:22 +08:00
casperlamboo
c309b594c2
Applied printer-linter format
2022-12-09 15:49:46 +00:00
Rijk van Manen
4b0d07a477
restore the correct setting
...
PP-277
2022-12-08 10:36:27 +01:00
Paul Kuiper
29c7f766be
There was an error was in the file naming which we need to uphold to prevent issues with ufp files.
...
The file name is called 'Fast' while the quality type inside the files is 'Draft'. This will be fixed in PP-222
Relates to: PP-277
2022-12-08 10:25:07 +01:00
just-trey
4103dee6d2
Merge branch 'main' into master
2022-12-08 00:20:21 -05:00
just-trey
016ab4714d
major updates
2022-12-07 12:18:28 -05:00
Paul Kuiper
d5bcd36ecd
Fixed error in 0.8mm profiles for PC and CPE+
...
The 0.15mm mode was generated iso 0.2mm
Relates to: PP-277
2022-12-07 17:10:55 +01:00
