Ghostkeeper
f4f990708f
Remove old 'category' metadata
...
Most of it was incorrect and very inconsistent too. These are not used by our code any more.
2020-04-28 09:27:31 +02:00
Jaime van Kessel
8d2083a539
Add temp warnings for the buildplate
...
CURA-6977
2019-12-24 10:54:51 +01:00
Ghostkeeper
0fe9e660b1
Don't show Silicone for UM printers that are incompatible with it anyway
...
It's still an open bug that we show materials of which all configurations are incompatible with the printer.
Contributes to issue CURA-6262.
2019-03-05 15:36:31 +01:00
Aleksei S
f021c83a3e
Exclude HIPS and PETG material type from all UM printers.
...
CURA-5149
2018-03-26 16:50:59 +02:00
Ghostkeeper
202f7f87f8
Remove ID from definition files
...
Sometimes it's out of sync. Sometimes even missing. Let's just not use that any more.
Contributes to issue CURA-4243.
2017-11-02 12:53:06 +01:00
Lipu Fei
f50255f1c9
Disable relative_extrusion for UMs
...
CURA-4219
2017-09-11 10:27:13 +02:00
Ghostkeeper
4b4f971222
Make 'other' the default category
...
This should make it a bit easier for others to create a new definition since there is less for them to 'have to know'. Previously they would be required to fill in as category Other, but now they can just leave the category out.
2017-08-25 09:17:55 +02:00
Ghostkeeper
e1266ceb1f
Change Ultimaker manufacturer to Ultimaker B.V.
...
The material profiles are sent to UM3 with a manufacturer that's obtained from the printer definition rather than the material definition. The printer definition was 'Ultimaker' rather than 'Ultimaker B.V.' and the printer checked against this.
Contributes to issue CURA-4159.
2017-08-11 10:24:13 +02:00
Jaime van Kessel
1f830e68bb
Min & max values for extruder prime pos are now enforced for Ultimaker machines
...
CURA-2375
2016-09-27 16:12:02 +02:00
Ghostkeeper
6909f88ce6
Increase default limit on feed rate
...
There is no real limit by default now. Only light speed (and the limit on the input element's length). The feed rate limit should be set by a machine definition. If there is no limit set, let there be no limit to what the user can input.
Contributes to issue CURA-2284.
2016-09-06 10:30:27 +02:00
Ghostkeeper
b89a9a8113
Allow freezing temperatures
...
But not on Ultimaker printers, because they crash.
2016-08-04 12:50:03 +02:00
Tim Kuipers
67058c3d45
fix: definition visibility got borked (CURA-1443)
...
machine definition visibility should be a metadata property and should be set to true for only those definitions which are actually machines
2016-06-10 14:52:15 +02:00
Tim Kuipers
149af8af28
Merge branch 'master' into feature_accelerations_and_jerk_per_feature_settigns_rework
2016-06-10 12:29:06 +02:00
Arjen Hiemstra
6847365e09
Indicate the UM2+ should use machine specific materials and qualities
...
Contributes to CURA-1612
2016-06-02 08:10:55 +02:00
Tim Kuipers
d67bd1015e
JSON fix: visible wasn't inside metadata (CURA-1443)
2016-05-30 14:50:09 +02:00
Ghostkeeper
f15445b1a3
Translate definition for Ultimaker
...
The preferred variant/profile/material has moved to the metadata.
Contributes to issue CURA-1278.
2016-05-17 17:46:30 +02:00
