DragonJe
85c7386990
Rename resources/quality/nwa3d_a31_nwa3d_a31_best.inst.cfg to resources/quality/nwa3d_a31/nwa3d_a31_best.inst.cfg
2019-07-15 15:00:01 -05:00
DragonJe
c690f52878
Rename nwa3d_a31_best.inst.cfg to nwa3d_a31_nwa3d_a31_best.inst.cfg
2019-07-15 14:59:43 -05:00
Ghostkeeper
bf34550488
Merge branch 'eMotion-Tech-master'
2019-07-15 15:01:02 +02:00
Ghostkeeper
505742e63f
Merge branch 'master' of https://github.com/eMotion-Tech/Cura into eMotion-Tech-master
2019-07-15 14:49:36 +02:00
Jaime van Kessel
9fd7ceeae1
Fix trailing ,
2019-07-15 14:01:26 +02:00
Ghostkeeper
20c55c09cd
Add description for smart hiding to Corner Seam Pref description
2019-07-15 11:34:04 +02:00
Jaime van Kessel
8ca68ebb15
Move Skin overlap to shell category from the infill category
2019-07-15 10:45:56 +02:00
Ghostkeeper
483e343b38
Specify both Ultimaker B.V. and Custom as preferred categories
...
This requires commit 91c6abfc56162aedc887098744533dfcd8f1cdd5 on Ultimaker/Cura.
Contributes to issue CURA-6640.
2019-07-11 09:58:40 +02:00
Ghostkeeper
40169809bc
Set the default build plate temperature to 0
...
All third-party materials that didn't fill in a value for this build volume temperature will then default to 0 which causes the printer to go into a safe mode that doesn't melt the plastic or anything.
Contributes to issue CURA-6652.
2019-07-10 15:59:05 +02:00
Ghostkeeper
bb49acbb7f
Use correct font for material estimates
...
Otherwise it uses the system defaults.
2019-07-10 14:42:26 +02:00
Ghostkeeper
83a24ed0cc
Rename machines with too long names
...
The names of these two printers were so long that the file names would be too long by default for some file systems. Cura was preventing the user from adding the printers then unless they changed their names.
2019-07-10 13:02:14 +02:00
Ghostkeeper
be86576ff9
Improve wording and name of 'Ignore Small Z Gaps'
...
Hopefully it'll be a bit more clear what this setting does, now.
2019-07-10 12:58:35 +02:00
Lipu Fei
3d410cceb9
Fix change material diameter binding
...
CURA-6590
2019-07-08 13:40:08 +02:00
Lipu Fei
b36d040ba9
Use rejected instead of visibility hack
...
CURA-6590
2019-07-08 13:01:42 +02:00
Lipu Fei
1f542d1bc8
Merge remote-tracking branch 'origin/master' into CURA-6590_continue_fix_diameter_reset
2019-07-08 12:49:58 +02:00
Ghostkeeper
21241c1914
Mark DeltaBot as a custom printer
...
Because that's what it is.
2019-07-08 10:27:06 +02:00
Ghostkeeper
c0297ceee5
Spelling correction
...
Noticed this when I was developing the settings guide.
2019-07-05 23:05:16 +02:00
Ghostkeeper
28f1e670f5
Give special values to the intents
...
This way we can see if the correct profile actually got loaded.
Contributes to issue CURA-6597.
2019-07-05 14:20:36 +02:00
Ghostkeeper
9aeea22c73
Disable intent category headers
...
Makes 'em look like headers.
Contributes to issue CURA-6597.
2019-07-05 12:05:44 +02:00
Ghostkeeper
32c5118ae4
Add intents per category to the intent menu
...
They are in the wrong order currently. The section headers all appear at the end and they are not greyed out. This must be fixed. The order might prove difficult... We'll see, but I want this locked in now because it works.
Contributes to issue CURA-6597.
2019-07-05 11:45:01 +02:00
Remco Burema
52d4875a68
Merge pull request #5967 from Ultimaker/CURA-6625-Remove-Max-Z-Speed-Overide
...
Remove the max-z-speed-override
2019-07-04 16:17:41 +02:00
Remco Burema
a495d71a14
Fill in manufacturers previously set to unknown/'not applicable'.
2019-07-04 14:39:28 +02:00
Ghostkeeper
d2daa15a13
Make testing intent profiles dependent on material, printer and variant
...
This way we can test with them (as long as you've selected ultimaker 3, AA0.4 and PLA).
Contributes to issue CURA-6597.
2019-07-04 11:10:54 +02:00
DragonJe
b55d0b3230
Create nwa3d_a31_e.inst.cfg
2019-07-03 17:41:27 -05:00
DragonJe
6428e9185c
Create nwa3d_a31_best.inst.cfg
2019-07-03 17:40:38 -05:00
DragonJe
62fa11f182
Create nwa3d_a31_fast.inst.cfg
2019-07-03 17:39:34 -05:00
DragonJe
225a34ae30
Create nwa3d_a31_normal.inst.cfg
2019-07-03 17:38:50 -05:00
DragonJe
abc980e3d6
Create nwa3d_a31_06.inst.cfg
2019-07-03 17:37:38 -05:00
DragonJe
87193da472
Create nwa3d_a31_04.inst.cfg
2019-07-03 17:37:12 -05:00
DragonJe
348b7cd9d8
Create nwa3d_a31_extruder_0.def.json
2019-07-03 17:35:39 -05:00
DragonJe
56b39d0b33
Create nwa3d_a31.def.json
2019-07-03 17:34:12 -05:00
Ghostkeeper
36971f0058
Give smooth an intent and increment setting_version
...
Smooth needs an intent because otherwise it gets the default intent. None of the default intents are allowed to have files.
Contributes to issue CURA-6597.
2019-07-03 16:52:33 +02:00
Remco Burema
fea8262656
Listen to 'material-changed' since it doesn't update immediately.
...
part of CURA-6590
2019-07-03 16:14:08 +02:00
Jaime van Kessel
7d446722a9
Remove the max-z-speed-override
...
CURA-6625
2019-07-03 16:13:21 +02:00
Jaime van Kessel
d43415191b
Merge branch 'CURA-6635_add_printer_by_manufacturer' of github.com:Ultimaker/Cura
2019-07-03 14:29:26 +02:00
Ghostkeeper
cfa059fb81
Remove removed prime tower settings
...
The prime tower is now always circular. This fixes a unit test.
2019-07-03 12:48:29 +02:00
Ghostkeeper
12e2e47e72
Make corrections to manufacturer fields
...
When it's categorised by manufacturer these mistakes become more apparent.
Contributes to issue CURA-6635.
2019-07-03 11:27:19 +02:00
Ghostkeeper
0678d47dad
Make 'Ultimaker B.V.' preferred manufacturer rather than 'Ultimaker'
...
Ultimaker was the category. Ultimaker B.V. is the manufacturer, which is now used as the section property.
Contributes to issue CURA-6635.
2019-07-03 11:12:41 +02:00
Ghostkeeper
e6f25884f8
Categorise printers by manufacturer
...
This should make it easier to find the printer you want.
Contributes to issue CURA-6635.
2019-07-03 10:56:19 +02:00
Ghostkeeper
365d725e42
Add escape as hotkey to exit full screen
...
Should be easier to discover.
Fixes #5956 .
2019-07-03 10:32:00 +02:00
Lipu Fei
e8c08b77e5
Merge pull request #5961 from Ultimaker/trouch-fix/creawsomemod
...
Import CreawsomeMod profiles and implement version upgrade
2019-07-03 09:42:05 +02:00
Ghostkeeper
d449ec9266
Really don't make creality_base a visible printer
...
It's not a printer. It's a base profile. Every printer in the list of printers should coincide with a physical printer, with the one exception of Custom FFF Printer.
If we find settings that work for all printers we should apply it to fdmprinter so that we do apply it to every printer.
Contributes to issue CURA-6554.
2019-07-03 09:31:10 +02:00
Ghostkeeper
d9b3f1fee9
Merge branch 'trouch-fix/creawsomemod' of github.com:trouch/Cura into trouch-fix/creawsomemod
2019-07-03 09:22:59 +02:00
Lipu Fei
63171508c9
Fix profiles
2019-07-03 09:18:39 +02:00
trouch
8081e32ebf
Change creality_base name to "Creawsome Custom"
2019-07-02 20:08:31 +02:00
trouch
0f79376547
fix ender purge line going out of bed
2019-07-02 19:39:20 +02:00
trouch
8911aa5cbb
Update creality_base def with last Creawsome one
2019-07-02 19:26:59 +02:00
Jaime van Kessel
4428c32df3
Merge branch 'master' of github.com:Ultimaker/Cura
2019-07-02 17:59:50 +02:00
Jaime van Kessel
2cd6b73d12
Ensure that the material selection gets reset when diameter is changed
...
CURA-6590
2019-07-02 17:59:27 +02:00
Ghostkeeper
a57304b603
Fix typo: Retracation -> Retraction
...
Contributes to issue CURA-6631.
2019-07-02 17:46:06 +02:00
